Well that didn't go as planned...

P71 · 03-21-2008, 11:59 PM

Stupid track was WAY too sticky...

First pass out went a 16.512@81.95 with a 2.3 60' (2 tenths and 2 MPH better then previous best, no changes)

. Drove around and went again immediately to a 16.63@81.5. Everything was perfect and the lanes were clear (there was maybe a dozen cars there) so I pulled up to do a third run in a row. Did my burnout, staged, launched from 7500RPM's...

...and snapped the new rear u-joint clean in two, and the driveshaft banged the ground and broke one of the collars off. SUCK!

So I wasted a good 30+ run night 10 minutes in! Got a guy to tow strap me to the Burger King outside the track (after pulling the driveshaft out), then called the insurance.

Had it towed to a family members house in Vancouver and my neighbor came down to rescue me.

Hitching a ride back down tomorrow with my tow straps to get it home, but we're going to try the driveline shop in Vancouver first.

The track better be this good tomorrow for the P71!!!!

85rx-7gsl-se · 03-22-2008, 12:32 AM

Dang man

...I am running a custom 3" in mine, aint going to break that

P71 · 03-22-2008, 12:47 AM

At least I got the honor (or shame) of being the first driveline failure of the year! Woot, go me!!

AndreS · 03-22-2008, 02:35 AM

breaking stuff is what drag racing is about isn't it? can't build it stronger without breaking it first!

P71 · 03-22-2008, 09:06 AM

Gotta pay if you want to play!

I'm starting to worry about the 'Vic, it missed a 2-3 upshift on me yesterday!

P71 · 03-22-2008, 02:28 PM

UPDATE:

I am the luckiest son of a...

I brought the broken driveshaft to I-5 Driveline in Vancouver, WA. He took one look at it and showed me that they were non-serviceable u-joints. So the "new" u-joint wasn't new at all! Just so happened to have a first Gen RX-7 driveshaft sitting there in the shop (that's the lucky part). He put new Spicer u-joints in it, cleaned it, trued it, balanced it, painted it, and sent me on my way in under an hour for a very, very competitive price (cheaper then the quotes I've been getting for a used one shipped).

So the car is home, and now I'm trying to figure out how to get a Summit universal driveshaft loop in it (since I already have one).

I do have to say that I-5 treated me very, very well, and on the Saturday before Easter at that. Couldn't ask for an easier fix to my breakage!

03-21-2008, 11:59 PM	#1
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Well that didn't go as planned... Stupid track was WAY too sticky... First pass out went a 16.512@81.95 with a 2.3 60' (2 tenths and 2 MPH better then previous best, no changes). Drove around and went again immediately to a 16.63@81.5. Everything was perfect and the lanes were clear (there was maybe a dozen cars there) so I pulled up to do a third run in a row. Did my burnout, staged, launched from 7500RPM's... ...and snapped the new rear u-joint clean in two, and the driveshaft banged the ground and broke one of the collars off. SUCK! So I wasted a good 30+ run night 10 minutes in! Got a guy to tow strap me to the Burger King outside the track (after pulling the driveshaft out), then called the insurance. Had it towed to a family members house in Vancouver and my neighbor came down to rescue me. Hitching a ride back down tomorrow with my tow straps to get it home, but we're going to try the driveline shop in Vancouver first. The track better be this good tomorrow for the P71!!!! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

03-22-2008, 12:47 AM	#3
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	At least I got the honor (or shame) of being the first driveline failure of the year! Woot, go me!! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

03-22-2008, 09:06 AM	#5
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Gotta pay if you want to play! I'm starting to worry about the 'Vic, it missed a 2-3 upshift on me yesterday! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

03-22-2008, 02:28 PM	#6
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	UPDATE: I am the luckiest son of a... I brought the broken driveshaft to I-5 Driveline in Vancouver, WA. He took one look at it and showed me that they were non-serviceable u-joints. So the "new" u-joint wasn't new at all! Just so happened to have a first Gen RX-7 driveshaft sitting there in the shop (that's the lucky part). He put new Spicer u-joints in it, cleaned it, trued it, balanced it, painted it, and sent me on my way in under an hour for a very, very competitive price (cheaper then the quotes I've been getting for a used one shipped). So the car is home, and now I'm trying to figure out how to get a Summit universal driveshaft loop in it (since I already have one). I do have to say that I-5 treated me very, very well, and on the Saturday before Easter at that. Couldn't ask for an easier fix to my breakage! __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-22-2008, 02:35 AM	#4
AndreS The Newbie Join Date: Mar 2008 Location: Issaquah, WA iTrader: (0) Posts: 13 Rep Power: 0	breaking stuff is what drag racing is about isn't it? can't build it stronger without breaking it first!