issues need help

FCTII · 05-23-2009, 10:02 PM

so my blow off valve was pretty much worn out it was a knock off hks and it caused a boost leak. i just recently replaced it and now it runs like a champ but the car wont idle. when i unplug the vac hose it idles just fine. if anyone could help me out that would be great.

TehMonkay · 05-23-2009, 11:09 PM

idle air mixture might be set too rich, check the fsm, if not that try to adjust the idle speed.

FCTII · 05-26-2009, 08:52 PM

i tried everything is there anyone around wausau WI that could help me out check it out i'll throw you some money???

Mazdaracer4fun · 06-04-2009, 12:11 AM

take a video of your problems and what you do to keep it running. that will help a lil bit...also make sure the car is at normal operating temperature (fully warmed up) b4 taking video... my rx7 idles funny till its all warmed up ... after that its a dream! lol

FCTII · 06-06-2009, 12:07 PM

in order to keep it running i need to hold my foot on the gas even when its warmed up. but it has a real jumpy idle whe the blow off valve it un plugged otherwise it wont idle when its plugged in. i'll take some video tho

TehMonkay · 06-07-2009, 03:25 PM

Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

FCTII · 06-07-2009, 05:52 PM

Quote:

Originally Posted by TehMonkay

Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

there is no bac valve it was removed before i bought it.

05-23-2009, 10:02 PM	#1
FCTII Rotary Fan in Training Join Date: Mar 2009 iTrader: (-1) Posts: 42 Rep Power: 0	issues need help so my blow off valve was pretty much worn out it was a knock off hks and it caused a boost leak. i just recently replaced it and now it runs like a champ but the car wont idle. when i unplug the vac hose it idles just fine. if anyone could help me out that would be great.

05-23-2009, 11:09 PM	#2
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	idle air mixture might be set too rich, check the fsm, if not that try to adjust the idle speed. __________________ My car blows up everytime I start it, it's rotary

06-07-2009, 03:25 PM	#6
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running. __________________ My car blows up everytime I start it, it's rotary

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-26-2009, 08:52 PM	#3
FCTII Rotary Fan in Training Join Date: Mar 2009 iTrader: (-1) Posts: 42 Rep Power: 0	i tried everything is there anyone around wausau WI that could help me out check it out i'll throw you some money???

06-04-2009, 12:11 AM	#4
Mazdaracer4fun S4 INTO S5 Turbo II OWNER Join Date: Dec 2008 Location: Parma, Ohio 44130 iTrader: (0) Posts: 70 Rep Power: 16	take a video of your problems and what you do to keep it running. that will help a lil bit...also make sure the car is at normal operating temperature (fully warmed up) b4 taking video... my rx7 idles funny till its all warmed up ... after that its a dream! lol

06-06-2009, 12:07 PM	#5
FCTII Rotary Fan in Training Join Date: Mar 2009 iTrader: (-1) Posts: 42 Rep Power: 0	in order to keep it running i need to hold my foot on the gas even when its warmed up. but it has a real jumpy idle whe the blow off valve it un plugged otherwise it wont idle when its plugged in. i'll take some video tho