S4 turbo drain question

3rd and final 7 · 03-30-2009, 08:06 PM

Im starting a turbo add on my Fb (which has a 88 NA), so question is what is the smallest size that i can use for my oil drain. im going to tap my front oil cover with a 3/8 NTP and use 8AN lines is all this too small?

Also what is the best size to run for oil feed 3 or 4AN i been reading both and do i need a restrictor?

Thank You for your time

Im adding a S4 turbo

NoDOHC · 04-02-2009, 09:55 PM

Basically, you should measure the ID of the stock hose (inlet and outlet) and make sure that yours is the same (or close). I can get you dimensions on stock lines tomorrow (I don't want to go down to the garage right now).

RETed · 04-03-2009, 07:22 AM

I'd be scared with the -8.
I use -10 minimum with -12 recommended.

-Ted

03-30-2009, 08:06 PM	#1
3rd and final 7 Rotary Fan in Training Join Date: Jan 2009 iTrader: (1) Posts: 82 Rep Power: 16	S4 turbo drain question Im starting a turbo add on my Fb (which has a 88 NA), so question is what is the smallest size that i can use for my oil drain. im going to tap my front oil cover with a 3/8 NTP and use 8AN lines is all this too small? Also what is the best size to run for oil feed 3 or 4AN i been reading both and do i need a restrictor? Thank You for your time Im adding a S4 turbo

04-02-2009, 09:55 PM	#2
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	Basically, you should measure the ID of the stock hose (inlet and outlet) and make sure that yours is the same (or close). I can get you dimensions on stock lines tomorrow (I don't want to go down to the garage right now). __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode