|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
Thread Tools | Display Modes |
01-09-2009, 03:55 PM | #1 |
Premium Vendor
|
Sunroof lid removel Question
I have the sunroof out and I need to swap the lids as the replacement rack is good but the list is shot..
the last time I did this was 10years ago and I don't remember how to swap the lids from one rack to another... Dan
__________________
82 SuperCharged rx-7 {my toy not the daily driver anymore now under restoration} 88 B2200 rotary powered with a 7inch Camden SuperCharger !RIP! Jan/4/2007 2001 626 5-speed 80k on the clock all stock {Truck replacement} 2005 MAZDA6 V6 WAGON now that is a pimping ride all stock for the moment.. Paid off WWW.AtkinsRotary.com |
01-13-2009, 10:14 AM | #2 |
crash auto?fix auto
|
Four (six?) 10mm nuts hold the sunroof lid to the frame. Remove the trim panel by tugging down at the clips at the front, then slide it forward/down. Should see the nuts at that point..........
|
01-14-2009, 03:16 AM | #3 |
StarSpeedRacing
|
^^^^^ What he said.
4 i think.
__________________
StarSpeedRacing Parts Development & Discount Parts! GB:FD Intercooler Kit GB:Stainless Non Turbo Headers Contact: StarSpeedRacing@gmail.com |
01-26-2009, 11:04 PM | #4 |
.drives like MrMagoo!
|
There are Six 10 mm nuts that hold the sunroof panel on.Three on each side(drivers and passenger rail).Pop the interior Sunroof panel off,when the sunroof is like(I hate that Word) half open,and you can snap the panel off easily.From there you will see the nut heads that hold the panel on.Remember there are Shims(u shaped metal plates) that are between the panel and the rail.(at least there were on some of the panel I removed)..there!.I helped DAN ATKINS!...now send me a Supercharger!..(just kidding,glad to help!).STYX!~
|