Who's on the list? - Page 11

Brent · 12-26-2008, 08:48 PM

Hey Frank, how am I looking?

LeeC · 12-28-2008, 09:50 PM

Quote:

Originally Posted by Brent

Hey Frank, how am I looking?

Same question

Looking like I'll make it in?

Flyrx7 · 12-29-2008, 03:17 PM

OK, latest batch of emails sent. They will have until this Friday, 1/02/09 to respond then I'll keep going down the list.

Charlie, you'll know by this Friday if you made it or not.
Brent & LeeC, you're still down the list a bit, but nothing is impossible (see note about plane tickets above

)

CarbonFD · 01-03-2009, 09:30 PM

Payment Sent... Thanks Frank...

Chris

Oliv · 01-05-2009, 01:14 PM

Just went back from vacation and got my pod that was waiting for me at the post office.

In one word: WHOWWW!!!

Great quality, tip top finish, solid and safe packaging, clear instructions, even the allen key is provided!!

Too bad I have no time in the coming days for install...

Charlie Redden · 01-05-2009, 10:16 PM

Frank,

Safe for me to assume that I did not make this run??

Charlie

Flyrx7 · 01-06-2009, 02:16 PM

Quote:

Originally Posted by Charlie Redden

Frank,

Safe for me to assume that I did not make this run??

Charlie

Charlie.........Good news, bad news.

Bad news first;

I've been laid up sick for the last week and haven't got around to sending the next round of emails, but it appears that I'll finally have the energy today to get that done.

Good news;

Keep an eye on your inbox today (hint, hint)

Charlie Redden · 01-06-2009, 08:13 PM

Frank,

Sorry to hear you have been under the weather. Maybe you should come on down to San Diego to enjoy the 60+ degree weather!

Payment sent for my pod!

Thank you very much!

Charlie

Charlie Redden · 01-12-2009, 10:45 PM

Frank,

Received my pod today....and it is BEAUTIFUL!

Thanks again.

Flyrx7 · 01-13-2009, 12:07 PM

Quick update.

All of the waiting list 60mm pods from the last batch have been shipped, with the exception of a couple that are waiting to be confirmed.

After it's all said and done, I have a couple RH60TP's and RH60QP's leftover. I also have some LH52TP's, LH52QP's, and RH52QP's in stock. So if you are looking for those part numbers let me know and I can ship them out ASAP.

This still leaves a few out there on the waiting list that I wasn't able to include in the last batch, but rest easy, as the next batch is already underway and nearing completion.
So for those of you out there that didn't get an email recently, hang tight.

If you want to double check with me as to your waiting list status, please drop me a line.

Regards,
Frank

FD3S-K · 01-14-2009, 01:51 AM

Can you double check my position on the list.

Thanks,
Geby

Flyrx7 · 01-14-2009, 09:49 AM

Quote:

Originally Posted by FD3S-K

Can you double check my position on the list.

Thanks,
Geby

Most definetely on the list and in the current batch.

LeeC · 01-15-2009, 12:34 AM

looking forward to the next batch!

FD3S-K · 02-01-2009, 11:16 AM

ETA?

Thanks,
Geby

Flyrx7 · 02-03-2009, 03:34 PM

Hey gang,

Just finishing up some intermittent contract work and a few things around the shop, and then back on pods next week sometime.
Pods themselves are at about 70% finished in the process. I'm not turning any work away right now so there may be some disruptions, but pods are still a priority and shouldn't be too much longer.
As it is now too, if you are on the list you'll be getting your pod this batch.

Thanks much!

Regards,
Frank

12-26-2008, 08:48 PM	#151
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	Hey Frank, how am I looking? __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

12-29-2008, 03:17 PM	#153
Flyrx7 Rotary Fanatic Join Date: May 2008 Location: WA State Posts: 168 Rep Power: 18	OK, latest batch of emails sent. They will have until this Friday, 1/02/09 to respond then I'll keep going down the list. Charlie, you'll know by this Friday if you made it or not. Brent & LeeC, you're still down the list a bit, but nothing is impossible (see note about plane tickets above ) __________________

01-05-2009, 10:16 PM	#156
Charlie Redden 17+ years... Join Date: Feb 2008 Location: Oahu Posts: 59 Rep Power: 18	Frank, Safe for me to assume that I did not make this run?? Charlie __________________ Charlie

01-06-2009, 08:13 PM	#158
Charlie Redden 17+ years... Join Date: Feb 2008 Location: Oahu Posts: 59 Rep Power: 18	Frank, Sorry to hear you have been under the weather. Maybe you should come on down to San Diego to enjoy the 60+ degree weather! Payment sent for my pod! Thank you very much! Charlie __________________ Charlie

01-12-2009, 10:45 PM	#159
Charlie Redden 17+ years... Join Date: Feb 2008 Location: Oahu Posts: 59 Rep Power: 18	Woo hoo! Frank, Received my pod today....and it is BEAUTIFUL! Thanks again. __________________ Charlie

01-03-2009, 09:30 PM	#154
CarbonFD Rotary Fan in Training Join Date: Mar 2008 Posts: 46 Rep Power: 0	Payment Sent... Thanks Frank... Chris

01-05-2009, 01:14 PM	#155
Oliv The Newbie Join Date: Feb 2008 Location: Paris, France Posts: 28 Rep Power: 0	Just went back from vacation and got my pod that was waiting for me at the post office. In one word: WHOWWW!!! Great quality, tip top finish, solid and safe packaging, clear instructions, even the allen key is provided!! Too bad I have no time in the coming days for install...

01-13-2009, 12:07 PM	#160
Flyrx7 Rotary Fanatic Join Date: May 2008 Location: WA State Posts: 168 Rep Power: 18	Quick update. All of the waiting list 60mm pods from the last batch have been shipped, with the exception of a couple that are waiting to be confirmed. After it's all said and done, I have a couple RH60TP's and RH60QP's leftover. I also have some LH52TP's, LH52QP's, and RH52QP's in stock. So if you are looking for those part numbers let me know and I can ship them out ASAP. This still leaves a few out there on the waiting list that I wasn't able to include in the last batch, but rest easy, as the next batch is already underway and nearing completion. So for those of you out there that didn't get an email recently, hang tight. If you want to double check with me as to your waiting list status, please drop me a line. Regards, Frank __________________

01-14-2009, 01:51 AM	#161
FD3S-K The Newbie Join Date: Mar 2008 Location: Kelowna, BC Posts: 23 Rep Power: 0	Can you double check my position on the list. Thanks, Geby __________________ 1993 MB RX-7 Touring - GT40R Hybrid,Large Streetport, XXXwhp "Speed has never killed anyone, suddenly becoming stationary.... that's what gets you."

01-15-2009, 12:34 AM	#163
LeeC The Newbie Join Date: Sep 2008 Posts: 12 Rep Power: 0	looking forward to the next batch!

02-01-2009, 11:16 AM	#164
FD3S-K The Newbie Join Date: Mar 2008 Location: Kelowna, BC Posts: 23 Rep Power: 0	ETA? Thanks, Geby __________________ 1993 MB RX-7 Touring - GT40R Hybrid,Large Streetport, XXXwhp "Speed has never killed anyone, suddenly becoming stationary.... that's what gets you."

02-03-2009, 03:34 PM	#165
Flyrx7 Rotary Fanatic Join Date: May 2008 Location: WA State Posts: 168 Rep Power: 18	Hey gang, Just finishing up some intermittent contract work and a few things around the shop, and then back on pods next week sometime. Pods themselves are at about 70% finished in the process. I'm not turning any work away right now so there may be some disruptions, but pods are still a priority and shouldn't be too much longer. As it is now too, if you are on the list you'll be getting your pod this batch. Thanks much! Regards, Frank __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode