|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
Thread Tools | Display Modes |
10-17-2008, 09:07 AM | #1 |
Rotary Fan in Training
|
Too much oil going to turbo?
Ok, so right now I've got oil coming out of my exhaust. Could this be caused by having too much oil going into the turbo? I've also got some oil coming out of the intake side of the turbo. I've got a T04S turbo. How can I restrict the amount of oil going into my turbo? I think I've got a restrictor pill. How would I remove it if it were too small? Also, where can I get new pills?
Someone give me some ideas!!!! |
10-17-2008, 09:46 AM | #2 |
Guest
Posts: n/a
|
no sorry that means your turbo seals are blown... You will have to rebuild the turbo now.. or replace
|
10-17-2008, 11:41 AM | #4 |
Guest
Posts: n/a
|
no dont drive the car, you are pushing oil into the intercooler and into your engine through the throttle body and you are running low on oil cause it is burning out of the exhaust..
the car is not driveable until the turbo has been rebuilt.. if u rebuild the turbo or replace it that will fix this problem |
10-17-2008, 11:51 AM | #6 |
Guest
Posts: n/a
|
leaking.. from where.. u mean leaking into the intercooler pipe or out the exhaust... NO. this is the reason.. it is a common problem with turbos in general they wear and the seals leak..
|
10-17-2008, 11:53 AM | #7 |
Respecognize!
|
if there is NO restricter or too large a line, then the oil pressure will push passed the seals. BUT if you already have a restricter then there is another issue at hand
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
10-17-2008, 11:59 AM | #8 |
Guest
Posts: n/a
|
I have never heard of needing a restrictor.. that IMO is just heresay.. I have ran MANY turbo cars in my life some with stock and some with high flow turbos and NEVER ran a restrictor.. hell I never heard fo them till I started coming here.
I think if the oil is passing through the seals then that means there is weak seals and u need to rebuild the turbo. |
10-17-2008, 12:04 PM | #9 |
Respecognize!
|
i have had to deal with problem on a few cars. There are quite a few turbos that have built in restricters as well.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
10-17-2008, 12:07 PM | #10 |
Guest
Posts: n/a
|
I have yet to run into this before.. I have dealt with many KK, turbo technics, Garrett, mitsu, hitachi, cummings turbo and NONE have I ever had this kind of problem..
IMO you need to rebuild your turbo.. pull the air snorkle off the front of the turbo (the snorkle that runs to the air filter) grab ahold of the nut by hand and see if you can move the whele in/out, up/down if there is play its done. |
10-17-2008, 12:29 PM | #12 |
Guest
Posts: n/a
|
did u check the play NOW.. since the problem has occured? Just cause the turbo is new dont mean that it is in good shape or that the build was good.
|
10-17-2008, 12:30 PM | #13 |
Respecognize!
|
quoted for truth. Ive plenty of "rebuilt" turbos shitcan after only a handful of hours.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
10-17-2008, 12:35 PM | #14 |
Guest
Posts: n/a
|
btw I am in no way saying what LOW Imp is saying abotu the "restrictor" is innaccurate.. I'm going from my years of experience with turbo vehicles and NEVER have heard of this problem/fix from a restrictor
|