Rear oil pipe on stock twins

AHarada · 08-02-2008, 11:30 PM

I'm having trouble getting this pipe on. It's the pipe with the heatshield over it that goes from the secondary turbo to the rear iron. When I took it off, it came off with no problems, but now for some reason it seems like it's bent. Anyone experience this? It's almost as if I am missing something in between the iron and the pipe, but I don't think I am. I have 2 of them and both are the same.

dregg100 · 08-03-2008, 08:36 AM

so, the drain line? just bend it a little.

David Jerome · 08-03-2008, 09:45 AM

You have to force it on there, those oil drain lines get bent really easily. Ther rear one doesnt bend as easy as the front but it is often times difficult to get to line back up. Worse case scenario you loosen all the turbo bolts/nuts to provide some extra clearance.

David

tom93r1 · 08-03-2008, 11:20 AM

loosen the piece thats attached to the turbos as well, it may provide enough slack to get everything back together.

SPICcnmFD · 08-04-2008, 08:24 AM

Like DJ said loosen the turbos up so they can move around then put the oil pipes on and then tighten the turbos down.

08-02-2008, 11:30 PM	#1
AHarada Rotary Fanatic Join Date: Mar 2008 iTrader: (1) Posts: 162 Rep Power: 17	Rear oil pipe on stock twins I'm having trouble getting this pipe on. It's the pipe with the heatshield over it that goes from the secondary turbo to the rear iron. When I took it off, it came off with no problems, but now for some reason it seems like it's bent. Anyone experience this? It's almost as if I am missing something in between the iron and the pipe, but I don't think I am. I have 2 of them and both are the same.

08-03-2008, 08:36 AM	#2
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	so, the drain line? just bend it a little. __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

08-03-2008, 09:45 AM	#3
David Jerome RCC Contributor Join Date: Jan 2008 iTrader: (10) Posts: 713 Rep Power: 17	You have to force it on there, those oil drain lines get bent really easily. Ther rear one doesnt bend as easy as the front but it is often times difficult to get to line back up. Worse case scenario you loosen all the turbo bolts/nuts to provide some extra clearance. David __________________ David Jerome Broker for Speed For Sale LLC (David@SpeedForSale.com) (Pre-owned RX7/sports car sales & new parts sales/installs/tuning) PM me about low priced, high quality port work

08-03-2008, 11:20 AM	#4
tom93r1 Rotary Fan in Training Join Date: Feb 2008 iTrader: (0) Posts: 45 Rep Power: 0	loosen the piece thats attached to the turbos as well, it may provide enough slack to get everything back together. __________________ 74 REPU big port 13b Weber 48 DCO 93 RX7 R1 76 Suzuki RE5

08-04-2008, 08:24 AM	#5
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Like DJ said loosen the turbos up so they can move around then put the oil pipes on and then tighten the turbos down. __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode