|
Show your rotary car build up. Show off your Rotary Car build! |
|
Thread Tools | Display Modes |
08-31-2017, 03:28 PM | #151 |
IT'S ALIVE!
|
I'm not sure how to embed videos from Google Photos. Does this link work: https://photos.google.com/share/AF1Q...I3akVubllYdE1R?
Sorry for the noise. The fan had just kicked on. It's idling around 1000 RPM. Anything less and it gets a little rough/unstable. It's quieter than I expected, but I haven't taken it much over 3500 RPM or about 10% throttle. Tuning is turning out to be difficult. No-load idle is pretty much sorted out to 4000 RPM. Tuning under load on the road is painful. Going from no load to load is requiring a massive increase in fuel due to the large changes in incoming air volume associated with small throttle movements. I assume this is handled by transient throttle adjustments but I read not to mess with that until the base fuel map is sorted. This would be much easier on a dyno. Any advice is welcome! |
09-01-2017, 09:37 AM | #152 | |
Can't.Make.Up.My.Mind.
|
Quote:
__________________
'90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure" |
|
09-04-2017, 12:51 PM | #153 |
IT'S ALIVE!
|
I can get the car to start, idle, and rev freely up to 4000 RPM. I'm sure it can go higher but I'm hesitant with the engine not broken in. Transient throttle situations and anything with more than 10% load is causing lean situations that cause the car to die. I literally can't drive it out of my driveway at this point, which is beyond frustrating. Unfortunately, it looks like I'm dead in the water until I can find some assistance because this is beyond me.
|
09-11-2017, 01:07 PM | #154 | |
Can't.Make.Up.My.Mind.
|
Quote:
__________________
'90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure" |
|
09-12-2017, 09:37 AM | #155 |
IT'S ALIVE!
|
Not very. Most of my experience is with piggy-back units in piston-engined cars. Just altering fuel and timing to improve power at partial and wide-open throttle. I don't have any experience starting from scratch. I've relied heavily on Chris at Ludwig Motorsports and Brian (TitaniumTT) just to get where I am now.
|
09-15-2017, 09:18 PM | #156 |
IT'S ALIVE!
|
New kid takes time away from working on the car. I managed to get a couple things done this week while off of work:
-Changed oil and filter. Went with 10W40 weight this time and I'm still seeing 40+ psi of oil pressure at idle. -Moved my vacuum manifold to the top of the intake manifold. The previous location allowed residual premix to pool in the vacuum manifold. -Added a 1 bar MAP sensor to give me the option to tune with speed-density. -Added 6 more oz of premix to bring the ration closer to 1.5 oz to 1 gal fuel during break-in. The last one really messed with my tune, I think. What worked before was now running very lean so I had to add a bunch of fuel back. I've got it running again but I haven't got it out on the road yet. Hopefully I'll get a chance this weekend. I've also ordered a FFE primary fuel rail and two ID725 injectors. I think relying on two ID1000 injectors in what are essentially secondary injector positions is going to prevent the car from running smoothly. Hopefully running smaller injectors in the stock primary location will smooth out idle and part throttle conditions. Vacuum sits around -6 psi at idle but peaks around -10 psi revving the engine in neutral below 3000 RPM. Hopefully this is enough to use speed-density tuning. Lastly, and not sure if this'll work, but here are the latest pictures: Last edited by infernosg; 09-18-2017 at 10:33 AM.. |
09-16-2017, 06:29 AM | #157 |
RCC Loves Me Not You
|
They don't show. . on my phone at least.
__________________
1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4 |
09-16-2017, 10:49 AM | #158 |
IT'S ALIVE!
|
Trying something new. Maybe this worked.
|
09-17-2017, 08:06 PM | #159 |
RCC Addict
|
TinyURL redirect to Google Photos?
It looks like your Google Photos account isn't set to public viewing... -Ted |
09-18-2017, 10:38 AM | #160 | |
IT'S ALIVE!
|
Quote:
|
|
09-18-2017, 01:21 PM | #161 |
Waffles - hmmm good
|
Google has really made it hard to link to photo on their site. First the removed
the image extension (.jpeg, ,gif etc) so sites like this would automatically imbed them as images. The they did more stuff with the urls that prevents them from being used reliably as you have found. I'm ready to move all my pics somewhere else at this point. The only problem is how to update all the threads from the past if you move and delete or do you just leave the existing. Anyway, fuck google!
__________________
1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00 |
09-19-2017, 09:42 AM | #163 | |
IT'S ALIVE!
|
Quote:
Do any of the other image hosting sites allow bulk uploading? Google Photos allows you to bulk download, so transferring pictures to be embedded online wouldn't be too difficult. The main issue I see is lack of available storage. That's another benefit of Google... Regarding the car... I managed to put a whopping 7 miles on it last night. That doesn't sound like much but it's the most I've actually driven it to date. Even got it up to 50 mph and through all 5 gears. It needs an alignment badly. Part throttle acceleration is good, cruise is okay, transient throttle, coming to stop and starting from a stop needs help. It'll stall if I close the throttle and disengage the clutch too quickly when coming to a stop. For whatever reason it goes super lean when starting from a stop. |
|
09-19-2017, 12:53 PM | #164 |
RCC Loves Me Not You
|
Flickr. .
__________________
1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4 |
09-24-2017, 10:57 AM | #165 |
IT'S ALIVE!
|
So I created a Youtube channel to embed videos, but apparently this site doesn't allow that either. Best I can do is share links:
Car idling: 20 minute drive: Last edited by infernosg; 09-24-2017 at 11:10 AM.. |