4x110 to 4x100 adapters?

Whizbang · 07-10-2008, 02:43 PM

Does anyone make them? I really want to run a set of miata wheels.

P71 · 07-10-2008, 06:19 PM

Can't. The hub/dust cap is too big. 4x110 to 4x108 (4x4.25) and 4x110 to 4x114.3 are your only options.

warwickben · 07-16-2008, 06:17 PM

i have a sa with rear drums how safe are these adpaters? i have a few extra sets of 4x4.25 from my mustang ect off set mite be way off but i know there are tons of 4x4.25 rims out there.

P71 · 07-16-2008, 06:27 PM

Read THIS thread:

http://www.rotarycarclub.com/showthread.php?t=2031

FIBREMAZ 13 BEEF · 09-24-2008, 09:45 PM

Quote:

Originally Posted by warwickben

i have a sa with rear drums how safe are these adpaters? i have a few extra sets of 4x4.25 from my mustang ect off set mite be way off but i know there are tons of 4x4.25 rims out there.

Some people will say they're dodgy but I've been running 4x110>4x114.3 adaptors on my SA for a couple of years with no problems so far

Whizbang · 09-24-2008, 10:07 PM

well my fronts are now going to be 5x114.3 and eventually the Moser axles will make the rear 5x114.3 as well...

el canito rotary · 11-06-2008, 06:43 PM

i just purchases some adapters 4x110 to 4x114.3 there are 1" thiknes. i just want to know if they maybe working

warwickben · 12-24-2008, 06:20 AM

i want to know where i can get some 4x110 adapters. does any one make a 4 to 5 bolt kit?

el canito rotary · 12-24-2008, 07:33 AM

Quote:

Originally Posted by Low Impedance

well my fronts are now going to be 5x114.3 and eventually the Moser axles will make the rear 5x114.3 as well...

best way to do it is bring the rotors to the machine shop and they drill the holes for you any bolt pattern you want .that the way we do it in puerto rico

730RWHP12A · 12-26-2008, 09:03 PM

Quote:

Originally Posted by el canito rotary

best way to do it is bring the rotors to the machine shop and they drill the holes for you any bolt pattern you want .that the way we do it in puerto rico

re drilling your front hubs and rear axles is the best way to do it however quite costly in the states.

adapters are not the best way to go but they do get the job done

warwickben · 12-27-2008, 08:15 AM

whats the best option for a sa to get better rims?

White88FC · 12-27-2008, 10:27 AM

Quote:

Originally Posted by P71

Can't. The hub/dust cap is too big. 4x110 to 4x108 (4x4.25) and 4x110 to 4x114.3 are your only options.

That is not true . My 79 sa with 4x110 to 4x100 adapters

warwickben · 01-29-2009, 04:28 PM

any links to sites that sell them? every site i have found wants 2x as much for a custom set.

White88FC · 01-29-2009, 04:39 PM

I had bought mine used so I dont know who made them. I've got a really cool set of old school sa rims I'd sell though pm me if interested

warwickben · 01-30-2009, 05:45 AM

pm me pics and price.

07-10-2008, 02:43 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	4x110 to 4x100 adapters? Does anyone make them? I really want to run a set of miata wheels. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

07-10-2008, 06:19 PM	#2
P71 RCC Contributor Join Date: Feb 2008 Location: WA State Posts: 651 Rep Power: 18	Can't. The hub/dust cap is too big. 4x110 to 4x108 (4x4.25) and 4x110 to 4x114.3 are your only options. __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

07-16-2008, 06:27 PM	#4
P71 RCC Contributor Join Date: Feb 2008 Location: WA State Posts: 651 Rep Power: 18	Read THIS thread: http://www.rotarycarclub.com/showthread.php?t=2031 __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

09-24-2008, 10:07 PM	#6
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	well my fronts are now going to be 5x114.3 and eventually the Moser axles will make the rear 5x114.3 as well... __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

12-24-2008, 06:20 AM	#8
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma Posts: 408 Rep Power: 18	i want to know where i can get some 4x110 adapters. does any one make a 4 to 5 bolt kit? __________________

07-16-2008, 06:17 PM	#3
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma Posts: 408 Rep Power: 18	i have a sa with rear drums how safe are these adpaters? i have a few extra sets of 4x4.25 from my mustang ect off set mite be way off but i know there are tons of 4x4.25 rims out there.

11-06-2008, 06:43 PM	#7
el canito rotary Rotary Fanatic Join Date: Nov 2008 Posts: 351 Rep Power: 17	i just purchases some adapters 4x110 to 4x114.3 there are 1" thiknes. i just want to know if they maybe working

12-27-2008, 08:15 AM	#11
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma Posts: 408 Rep Power: 18	whats the best option for a sa to get better rims? __________________

01-29-2009, 04:28 PM	#13
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma Posts: 408 Rep Power: 18	any links to sites that sell them? every site i have found wants 2x as much for a custom set. __________________

01-29-2009, 04:39 PM	#14
White88FC The Newbie Join Date: Sep 2008 Location: Forest, OH Posts: 19 Rep Power: 0	I had bought mine used so I dont know who made them. I've got a really cool set of old school sa rims I'd sell though pm me if interested __________________ 79 sa22c - Sold 88 fc3s TII - currently N/A - But hey it runs

01-30-2009, 05:45 AM	#15
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma Posts: 408 Rep Power: 18	pm me pics and price. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode