RXtacy's slooow build up

RXtacy · 07-22-2016, 03:19 PM

That's all fine and good if you are willing to ruin the lugs. I have the wheel locks keys, I just didn't have them up there when we needed them last time. I don't plan to ruin nice lugs for no reason.

***TitaniumTT*** · 07-22-2016, 03:33 PM

Quote:

Originally Posted by chibikougan

Just buy a smaller socket notch the locks and bang that lil socket on there take off wheel lock.

Quote:

Originally Posted by chibikougan

Or just weld a damn Nut on the end..

Done both, both have worked.... I've also just torched the lug cherry red and hammered a socket on.... socket still useable too.... next time, look at my 3/8" drive 17mm deep socket

Quote:

Originally Posted by RXtacy

That's all fine and good if you are willing to ruin the lugs. I have the wheel locks keys, I just didn't have them up there when we needed them last time. I don't plan to ruin nice lugs for no reason.

I thought the key was lost.... have you found it?

chibikougan · 07-22-2016, 03:46 PM

Haha likely look a lot like my bangers fit a 21 at the tip

Well we thought this was a no key sitch...

***TitaniumTT*** · 07-22-2016, 04:33 PM

Fuckin Auggie.....

RXtacy · 07-22-2016, 06:29 PM

Quote:

Originally Posted by TitaniumTT

I thought the key was lost.... have you found it?

Never said it was lost. I told you I must have taken it home, which I did. I have two here.

Quote:

Originally Posted by chibikougan

Well we thought this was a no key sitch...

Always love watching that

Sad Tyler sold his FD.

RXtacy · 08-01-2016, 08:53 AM

Well it was another weekend of long hours and a lot of work. Once again gotta thank Brian for putting in the unnatural hours with me. Going to sleep at 7am is getting old

Started with glaze and sand, glaze and sand, glaze and sand for what seemed like eternity. Brian and Pete inspected/measured/stacked a short block in the time I spent sanding

At the end though the work paid off. Nothing like rubbing your hand (or other appendages

) accross some freshly 400 grit sanded glaze

Once again the paint gun was giving us fits. A fresh rebuild kit seemed to make things worse! A wrong parts diagram, two stripped fasteners, a removed seal, and a lot of cussing later we had a functional gun.

With the gun working as it should Brian laid down some more beautiful paint work. Which turned out to be the biggest cock tease ever. More on that later, let's enjoy it while we can.

So why was the paint a cock tease? Because it's the wrong fucking color

The shop that painted my car specifically told me the color was called Frozen Grey Metallic from BMW. So that's what we got. Unfortunately it is several shades darker than the paint on the car. BMW also has a color called Frozen Silver Metallic which looks lighter and what I'm guessing is the actual color of the car. Soo ~$400 worth of paint wasted. Not to mention the time and effort.

At least there will be much less to prep for the next go around. And silver lining pun intended

Brian and I both really like the Frozen Grey Metallic color so it may appear on something in the future

Pete_89T2 · 08-01-2016, 01:52 PM

Quote:

Originally Posted by RXtacy

So why was the paint a cock tease? Because it's the wrong fucking color

The shop that painted my car specifically told me the color was called Frozen Grey Metallic from BMW. So that's what we got. Unfortunately it is several shades darker than the paint on the car. BMW also has a color called Frozen Silver Metallic which looks lighter and what I'm guessing is the actual color of the car. Soo ~$400 worth of paint wasted. Not to mention the time and effort.

At least there will be much less to prep for the next go around. And silver lining pun intended

Brian and I both really like the Frozen Grey Mettalic color so it may appear on something in the future

Damn, for the wrong color that looks great! Maybe you should buy more of that stuff and shoot the rest of the car in that color.

***TitaniumTT*** · 08-01-2016, 04:37 PM

Quote:

Originally Posted by RXtacy

Well it was another weekend of long hours and a lot of work. Once again gotta thank Brian for putting in the unnatural hours with me.

Quote:

Originally Posted by RXtacy

Going to sleep at 7am is getting old

Yeah.... I'm pretty well done with that

Quote:

Originally Posted by RXtacy

Started with glaze and sand, glaze and sand, glaze and sand for what seemed like eternity. Brian and Pete inspected/measured/stacked a short block in the time I spent sanding

Don't forget porting! Or rather.... trying as hard as I could to make a 4 port engine have 2 port shapes!

Quote:

Originally Posted by RXtacy

At the end though the work paid off. Nothing like rubbing your hand (or other appendages

) accross some freshly 400 grit sanded glaze

mmmmmmmmm..... that was a pic at what... 1am?

Quote:

Originally Posted by RXtacy

Once again the paint gun was giving us fits. A fresh rebuild kit seemed to make things worse! A wrong parts diagram, two stripped fasteners, a removed seal, and a lot of cussing later we had a functional gun.

I'm thinking of buying new parts, gotta price them out first though.... shit gets expensive and I wonder what new guns are selling for these days. I certainly got my use out of that gun in the last 14 years. Three cars, two boats.... and I'm sure I'm forgetting alot of shit... but motherfucking Kyle....

Quote:

Originally Posted by RXtacy

With the gun working as it should Brian laid down some more beautiful paint work. Which turned out to be the biggest cock tease ever. More on that later, let's enjoy it while we can.

Quote:

Originally Posted by RXtacy

So why was the paint a cock tease? Because it's the wrong fucking color

The shop that painted my car specifically told me the color was called Frozen Grey Metallic from BMW. So that's what we got. Unfortunately it is several shades darker than the paint on the car. BMW also has a color called Frozen Silver Metallic which looks lighter and what I'm guessing is the actual color of the car. Soo ~$400 worth of paint wasted. Not to mention the time and effort.

I'm saying this to make you feel better and help you avoid an ass raping in three weeks..... it was a waste from the color onward. Everything else needed to be done.
Having said that, we started with the color at 4am?

Quote:

Originally Posted by RXtacy

At least there will be much less to prep for the next go around. And silver lining pun intended

Brian and I both really like the Frozen Grey Metallic color so it may appear on something in the future

Seeing it in one color though.... we can see a few low areas on the passenger side well that we can address now

Quote:

Originally Posted by Pete_89T2

Damn, for the wrong color that looks great! Maybe you should buy more of that stuff and shoot the rest of the car in that color.

YOU SHUT YOUR WHORE MOUTH!!!!!!!

FC Zach · 08-01-2016, 10:40 PM

Quote:

Originally Posted by Pete_89T2

Damn, for the wrong color that looks great! Maybe you should buy more of that stuff and shoot the rest of the car in that color.

Yeah, looks good!

speedjunkie · 08-02-2016, 02:28 AM

Ah yes, I've been through being told the wrong color. Although mine was only a front bumper.

That engine bay does look great though. It would look good over the whole car I imagine.

lol, wub you Bri.

speedjunkie · 08-02-2016, 02:51 AM

Double post. POS computer.

RXtacy · 08-02-2016, 08:15 AM

Quote:

Originally Posted by Pete_89T2

Damn, for the wrong color that looks great! Maybe you should buy more of that stuff and shoot the rest of the car in that color.

No thanks.

Quote:

Originally Posted by TitaniumTT

Yeah.... I'm pretty well done with that

Truth.

Quote:

Don't forget porting! Or rather.... trying as hard as I could to make a 4 port engine have 2 port shapes!

Indeed.

Quote:

mmmmmmmmm..... that was a pic at what... 1am?

I lost track of time at some point, but that sounds about right

Quote:

I'm thinking of buying new parts, gotta price them out first though.... shit gets expensive and I wonder what new guns are selling for these days. I certainly got my use out of that gun in the last 14 years. Three cars, two boats.... and I'm sure I'm forgetting alot of shit... but motherfucking Kyle....

This.

Quote:

I'm saying this to make you feel better and help you avoid an ass raping in three weeks..... it was a waste from the color onward. Everything else needed to be done.
Having said that, we started with the color at 4am?

Yes I'm well aware and that was what I meant, still could have gone to bed 3-4 hrs earlier

Quote:

Seeing it in one color though.... we can see a few low areas on the passenger side well that we can address now

Yes that is one of the upsides.

Quote:

Originally Posted by FC Zach

Yeah, looks good!

Thanks man.

Quote:

Originally Posted by speedjunkie

Ah yes, I've been through being told the wrong color. Although mine was only a front bumper.

That engine bay does look great though. It would look good over the whole car I imagine.

lol, wub you Bri.

Pain in the dick it is.

I like the color, but I'm perfectly happy with the current color also. No chance in hell I'm repainting the car

Fendamonky · 08-02-2016, 09:55 AM

That's looking damn good Mike!!! It makes me seriously consider asking Brian to add engine bay painting to my list of work when mine goes up...

speedjunkie · 08-03-2016, 02:41 AM

Quote:

Originally Posted by RXtacy

Pain in the dick it is.

I like the color, but I'm perfectly happy with the current color also. No chance in hell I'm repainting the car

Yeah it's a good color, but I totally get that lol.

Did they mistakenly tell you the wrong color, or were they lying? Because I was told it would be Mazda black, then they used Lexus black because they had some left over from painting another guys car but took my money for paint anyway because the owner was a crooked prick that ripped his own mom off for $10k, and that's barely scratching the surface.

I'm not bitter. LOL

RXtacy · 08-03-2016, 07:59 AM

Quote:

Originally Posted by Fendamonky

That's looking damn good Mike!!! It makes me seriously consider asking Brian to add engine bay painting to my list of work when mine goes up...

Thanks Levi.

Quote:

Originally Posted by speedjunkie

Yeah it's a good color, but I totally get that lol.

Did they mistakenly tell you the wrong color, or were they lying? Because I was told it would be Mazda black, then they used Lexus black because they had some left over from painting another guys car but took my money for paint anyway because the owner was a crooked prick that ripped his own mom off for $10k, and that's barely scratching the surface.

I'm not bitter. LOL

It could be either I suppose though this was the first car in matte silver they had done so I doubt it's a similar scenario. I've been less than impressed with their work as time has gone on. The shop is out of business now so who knows

That sucks the shop ripped you off with the paint

07-22-2016, 04:33 PM	#289
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Fuckin Auggie..... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-02-2016, 02:28 AM	#295
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Ah yes, I've been through being told the wrong color. Although mine was only a front bumper. That engine bay does look great though. It would look good over the whole car I imagine. lol, wub you Bri.

08-02-2016, 02:51 AM	#296
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Double post. POS computer.