Middle TN - Thread

project86 · 04-18-2016, 05:51 PM

hes a big haltech guy right?

FC Zach · 04-18-2016, 06:13 PM

Yep

djmtsu · 04-19-2016, 07:44 AM

He's on the forums here too. C. Ludwig Owner of LMS-EFI

***TitaniumTT*** · 04-19-2016, 11:52 AM

So Zac, what was your mileage like on the way back?

project86 · 04-19-2016, 12:29 PM

Still wishing I'd kept my fc right about now. I'm not sure I can swing vinnies

FC Zach · 04-19-2016, 12:41 PM

Quote:

Originally Posted by TitaniumTT

So Zac, what was your mileage like on the way back?

Jumped to 20! People's eyes and lungs were thankful as well.

***TitaniumTT*** · 04-19-2016, 01:32 PM

excellent... and that was just with some timing changes. It you wanna get froggy you can run 35* and some negative split and really lean it out. But watch your EGT's.

EGT's are the reason I run 30-35* and .92L at cruise.

FC Zach · 04-19-2016, 01:36 PM

Paul text me and said he got some good data from a day of logging

***TitaniumTT*** · 04-19-2016, 01:43 PM

Sexellent. Data-logging is great for fine tuning everything up to WOT. After that you really need the dyno to make sure changes are going in the right direction.

FC Zach · 04-19-2016, 01:46 PM

That's in the works, when Ludwig returns to my buddy's shop in the near future I want to have him check it out.

project86 · 04-19-2016, 07:07 PM

Quote:

Originally Posted by FC Zach

That's in the works, when Ludwig returns to my buddy's shop in the near future I want to have him check it out.

What's the shop? Is there a standard tuning cost or is it like a time based thing?

FC Zach · 04-19-2016, 07:08 PM

Gage Performance in Smyrna. Not sure about the costs. .

project86 · 04-19-2016, 07:34 PM

Well i just texted vinnie again. trying to find out a good time to go put eyes on the car. wife is good to go on it. i just want see it and work out payment and all that.

Johnny_K · 04-19-2016, 08:47 PM

Quote:

Originally Posted by project86

What's the shop? Is there a standard tuning cost or is it like a time based thing?

from I remembered it was $100 an hr and that was just dyno time and doesn't cover the tune.

almoststockfc · 04-20-2016, 06:35 AM

2 shirts left. 1 L grey and 1 S grey. Let me know if anyone wants one.

(edit) Johnny- i think when you got your other shirts the guy just added them and didn't remove these. I say that because Mel is the only person i ordered a size small for.

04-18-2016, 05:51 PM	#3331
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	hes a big haltech guy right? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

04-18-2016, 06:13 PM	#3332
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	Yep __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

04-19-2016, 07:44 AM	#3333
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	He's on the forums here too. C. Ludwig Owner of LMS-EFI __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

04-19-2016, 11:52 AM	#3334
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	So Zac, what was your mileage like on the way back? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-19-2016, 12:29 PM	#3335
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	Still wishing I'd kept my fc right about now. I'm not sure I can swing vinnies __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

04-19-2016, 01:32 PM	#3337
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	excellent... and that was just with some timing changes. It you wanna get froggy you can run 35* and some negative split and really lean it out. But watch your EGT's. EGT's are the reason I run 30-35* and .92L at cruise. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-19-2016, 01:36 PM	#3338
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	Paul text me and said he got some good data from a day of logging __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

04-19-2016, 01:43 PM	#3339
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Sexellent. Data-logging is great for fine tuning everything up to WOT. After that you really need the dyno to make sure changes are going in the right direction. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-19-2016, 01:46 PM	#3340
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	That's in the works, when Ludwig returns to my buddy's shop in the near future I want to have him check it out. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

04-19-2016, 07:08 PM	#3342
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	Gage Performance in Smyrna. Not sure about the costs. . __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

04-19-2016, 07:34 PM	#3343
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	Well i just texted vinnie again. trying to find out a good time to go put eyes on the car. wife is good to go on it. i just want see it and work out payment and all that. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

04-20-2016, 06:35 AM	#3345
almoststockfc ..... Join Date: Jan 2010 Location: Murfreesboro, TN iTrader: (0) Posts: 543 Rep Power: 15	2 shirts left. 1 L grey and 1 S grey. Let me know if anyone wants one. (edit) Johnny- i think when you got your other shirts the guy just added them and didn't remove these. I say that because Mel is the only person i ordered a size small for. __________________ -75 RE_W_PU - -76 Hercules W2000 - DGRR 2012 3rd place Old School -75 Hercules W2000 MSO - DGRR 2011 Peoples Choice - April 2011 Rotary of the Month -Rotary snowmobile powered go kart - DGRR 2012 Peoples Choice - RIP Last edited by almoststockfc; 04-20-2016 at 07:48 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode