Housing refurbishing

Pourman · 03-03-2008, 05:25 PM

I have several sets of the Aluminum Housings that are marginally usable ... is there a place to get them re-chromed , or Cermet Coated , or something ?? ... also , what would determine a usable housing for this process ??

cewrx7r1 · 03-03-2008, 05:35 PM

http://www.jhbperformance.com/

Warpage, compression, corrosion, deap cuts, etc.

Go to PineApple http://www.pineappleracing.com/ and view the video on how to inspect housings.

RXtacy · 03-03-2008, 05:36 PM

When you say marginally usable what do you mean? Are they within spec? Do they have any scratches or deep scoring?

Pourman · 03-03-2008, 06:28 PM

One set has a small groove where the side seals were touching the housing face , and the other it appears that an apex seal gouged it ... I didn't know if some filler could be added then resurfaced to be within Spec again , or should I just buy new or usable used housings ??

David Jerome · 03-03-2008, 07:03 PM

Quote:

Originally Posted by Pourman

One set has a small groove where the side seals were touching the housing face , and the other it appears that an apex seal gouged it ... I didn't know if some filler could be added then resurfaced to be within Spec again , or should I just buy new or usable used housings ??

Toss those out, depending on where the gouge is and how bad it is it could possibly still be usuable but that is a judgement call and that is something you really use in a track car or beater car.

Pourman · 03-04-2008, 12:04 AM

Yeah , after reading the two links to the websites above , I think I'm better off just getting new ones

RXtacy · 03-04-2008, 08:46 AM

If you do decide to go with new housings check out RHDJapan.com

https://www.rhdjapan.com/jdm/Mazda-O...-13B-REW-12978

They have good pricing usualy, also check with Ray Crowe at Malloy, I'm not sure what his current pricing on housings is but he also has very good pricing. Or one more option they are trying to start a group buy for housings with RHDJapan you could possibly wait and get a really good deal through that.

http://www.rotarycarclub.com/showthread.php?t=541

03-03-2008, 05:25 PM	#1
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida iTrader: (0) Posts: 320 Rep Power: 17	Housing refurbishing I have several sets of the Aluminum Housings that are marginally usable ... is there a place to get them re-chromed , or Cermet Coated , or something ?? ... also , what would determine a usable housing for this process ??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-03-2008, 05:35 PM	#2
cewrx7r1 The Judge Join Date: Feb 2008 iTrader: (0) Posts: 196 Rep Power: 17	http://www.jhbperformance.com/ Warpage, compression, corrosion, deap cuts, etc. Go to PineApple http://www.pineappleracing.com/ and view the video on how to inspect housings.

03-03-2008, 05:36 PM	#3
RXtacy Rotary Fanatic Join Date: Mar 2008 Location: Rockville MD iTrader: (0) Posts: 456 Rep Power: 17	When you say marginally usable what do you mean? Are they within spec? Do they have any scratches or deep scoring?

03-03-2008, 06:28 PM	#4
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida iTrader: (0) Posts: 320 Rep Power: 17	One set has a small groove where the side seals were touching the housing face , and the other it appears that an apex seal gouged it ... I didn't know if some filler could be added then resurfaced to be within Spec again , or should I just buy new or usable used housings ??

03-04-2008, 12:04 AM	#6
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida iTrader: (0) Posts: 320 Rep Power: 17	Yeah , after reading the two links to the websites above , I think I'm better off just getting new ones

03-04-2008, 08:46 AM	#7
RXtacy Rotary Fanatic Join Date: Mar 2008 Location: Rockville MD iTrader: (0) Posts: 456 Rep Power: 17	If you do decide to go with new housings check out RHDJapan.com https://www.rhdjapan.com/jdm/Mazda-O...-13B-REW-12978 They have good pricing usualy, also check with Ray Crowe at Malloy, I'm not sure what his current pricing on housings is but he also has very good pricing. Or one more option they are trying to start a group buy for housings with RHDJapan you could possibly wait and get a really good deal through that. http://www.rotarycarclub.com/showthread.php?t=541