Another starting issue...

***Herblenny*** · 06-29-2008, 08:13 AM

Man, I'm getting pretty sick of this car!!!

I'm starting to have starting issue again.

When starting the in the morning, the engine will spin over but doesn't catch/fire. After about 5-10 seconds, it will catch and idle. Well, this issue has gotten worse and now when engine fires up, the idle will hunt and rpm will drop and just die.

When the engine is warm, car usually starts fine. But now this has gotten slightly worse over past 7 days.

I've tried with FD sparks and first installed, it cranked right up. But as I started to drive around and such, the problem increased. I just can't seem to figure out whats wrong.. The coils are less then 5k miles (3 months old), Wires are also 3 months old, Sparks have less than 5K (3.5 months old), and HKS twin power didn't make much of a difference.

Personally, what I know about Rotaries, I don't think its the short block as it has power and idles fine when it starts. I feel like its something to do with the computer or ignition system..

Anyone who has an idea about this, I would greatly appreciate it.. Or help me troubleshoot.

I8U · 06-29-2008, 01:16 PM

Have the PCM checked out by the dealer...mine went bad a few months when I had all the same issues you are now having.

***Herblenny*** · 06-30-2008, 08:39 AM

Hmm.. Well, I'm hoping to take it in tomorrow morning or something this week..

***Herblenny*** · 06-30-2008, 08:24 PM

Well, I took the car apart after work today and I think I found few little issues..

One I found that the screws holding the Map sensor to the intake was loose. The plastic was stripped and I think air was leaking in. I also noticed that the O ring was kind of bad. I got a larger screw and when bolted in, It made a difference in start up. But the idle was still shitty.

I'm still taking the car to the dealership in the morning.. I guess I'll let them take a look and see what they tell me... I have some new sparks coming in!

***Herblenny*** · 07-01-2008, 09:33 AM

Brought the car into Trussville Mazda.. Got a loaner Mazda 6 and its pretty damn comfy!

I talked to the rotary tech and mentioned to him what I did.. He's going to plug in the computer and going to let me know today!

My5ABaby · 07-01-2008, 09:45 AM

Mazda 6's rock.

I8U · 07-01-2008, 12:37 PM

In what world!?!

My5ABaby · 07-01-2008, 12:44 PM

Quote:

Originally Posted by I8U

In what world!?!

In the sedan world.

SPICcnmFD · 07-01-2008, 12:55 PM

Thats what I got, a red, with cloth interior, auto with about 3k on it. It actually rode better than my MS6, but that was pretty much all I liked about it more.

Phoenix7 · 07-01-2008, 12:57 PM

Quote:

Originally Posted by My5ABaby

In the fwd sedan world.

fixxored

It might be a great grocery getter. What's the MPG?

Also, looks like herb needs another car.

***Herblenny*** · 07-01-2008, 02:12 PM

I just got a call back from Trussville Mazda.. They said the fuel pump might be bad... So, they are ordering one and install it tomorrow.. even though i could do that, I prefer not to touch the 8 for awhile

And I get to keep the 6 for another day!! Yeah!! LOL!

Phoenix7 · 07-01-2008, 03:58 PM

damn, I don't trust dealerships. You're documenting all the things that they say can be wrong so at least we'll know in the end.

My5ABaby · 07-01-2008, 06:47 PM

Quote:

Originally Posted by SPICcnmFD

Thats what I got, a red, with cloth interior, auto with about 3k on it. It actually rode better than my MS6, but that was pretty much all I liked about it more.

Auto's suck.

My brother has the 4cyl but auto and mines manual... mine rocks his all over the road. The MS6 looks great, but I already have a sports car so I figured I'd get something I could haul a couple things in and get great gas mileage.

Quote:

Originally Posted by phoenix7

fixxored

It might be a great grocery getter. What's the MPG?

Also, looks like herb needs another car.

Like I said, it's a good sedan. By that, yeah, it's a great grocery getter and all around car. I get about 29-30 combined mpg in the 4cyl manual.

Phoenix7 · 07-01-2008, 06:50 PM

30 mpg isn't bad at all. Bet you're loving it right now.

blwnrtr93 · 07-02-2008, 09:06 AM

The wife and I have been loving ours for the last 2.5 years.

06-29-2008, 08:13 AM	#1
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Another starting issue... Man, I'm getting pretty sick of this car!!! I'm starting to have starting issue again. When starting the in the morning, the engine will spin over but doesn't catch/fire. After about 5-10 seconds, it will catch and idle. Well, this issue has gotten worse and now when engine fires up, the idle will hunt and rpm will drop and just die. When the engine is warm, car usually starts fine. But now this has gotten slightly worse over past 7 days. I've tried with FD sparks and first installed, it cranked right up. But as I started to drive around and such, the problem increased. I just can't seem to figure out whats wrong.. The coils are less then 5k miles (3 months old), Wires are also 3 months old, Sparks have less than 5K (3.5 months old), and HKS twin power didn't make much of a difference. Personally, what I know about Rotaries, I don't think its the short block as it has power and idles fine when it starts. I feel like its something to do with the computer or ignition system.. Anyone who has an idea about this, I would greatly appreciate it.. Or help me troubleshoot. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

06-29-2008, 01:16 PM	#2
I8U KONI Challenge Crew Join Date: Mar 2008 Location: Goldsboro, NC iTrader: (0) Posts: 126 Rep Power: 17	Have the PCM checked out by the dealer...mine went bad a few months when I had all the same issues you are now having. __________________ 04 TiGray RX8 MT, LS2 coil setup, 3" midpipe, HKS Hi-power 3" exhaust, TEIN S-Techs, Hotchkis Adj F/R sways, K&N Typhoon V2, Steel braided brake lines, Redline drivetrain fluids, ATE Super Blue brake fluid, Cobalt XR2/GTS brake combo, MB Motorpsorts Weapons 18x9 +45 offset, 275/35's I Support the KONI Sports Car Challenge!

06-30-2008, 08:39 AM	#3
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Hmm.. Well, I'm hoping to take it in tomorrow morning or something this week.. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

06-30-2008, 08:24 PM	#4
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Well, I took the car apart after work today and I think I found few little issues.. One I found that the screws holding the Map sensor to the intake was loose. The plastic was stripped and I think air was leaking in. I also noticed that the O ring was kind of bad. I got a larger screw and when bolted in, It made a difference in start up. But the idle was still shitty. I'm still taking the car to the dealership in the morning.. I guess I'll let them take a look and see what they tell me... I have some new sparks coming in! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

07-01-2008, 09:33 AM	#5
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Brought the car into Trussville Mazda.. Got a loaner Mazda 6 and its pretty damn comfy! I talked to the rotary tech and mentioned to him what I did.. He's going to plug in the computer and going to let me know today! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

07-01-2008, 09:45 AM	#6
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	Mazda 6's rock. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

07-01-2008, 12:37 PM	#7
I8U KONI Challenge Crew Join Date: Mar 2008 Location: Goldsboro, NC iTrader: (0) Posts: 126 Rep Power: 17	In what world!?! __________________ 04 TiGray RX8 MT, LS2 coil setup, 3" midpipe, HKS Hi-power 3" exhaust, TEIN S-Techs, Hotchkis Adj F/R sways, K&N Typhoon V2, Steel braided brake lines, Redline drivetrain fluids, ATE Super Blue brake fluid, Cobalt XR2/GTS brake combo, MB Motorpsorts Weapons 18x9 +45 offset, 275/35's I Support the KONI Sports Car Challenge!

07-01-2008, 12:55 PM	#9
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Thats what I got, a red, with cloth interior, auto with about 3k on it. It actually rode better than my MS6, but that was pretty much all I liked about it more. __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

07-01-2008, 02:12 PM	#11
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	I just got a call back from Trussville Mazda.. They said the fuel pump might be bad... So, they are ordering one and install it tomorrow.. even though i could do that, I prefer not to touch the 8 for awhile And I get to keep the 6 for another day!! Yeah!! LOL! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

07-02-2008, 09:06 AM	#15
blwnrtr93 Rotary Fanatic Join Date: Feb 2008 Location: AL iTrader: (1) Posts: 379 Rep Power: 17	The wife and I have been loving ours for the last 2.5 years. __________________ 1993 BB RX-7 2005 Black Mazda 6i 1991 Primer Celica GT 1968 Camo Chevy P/U Garfinkle's Airpump Idler Pulley: Keep the stock contact patch on your water pump w/o running Airpump!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode