Transmission Options?

WankelsRevenge · 04-07-2013, 06:56 PM

So Im having quite a few problems finding a transmission to swap into my 86 NA, which has got me wondering what other options might be feasible. Im mostly curious about what options are out there and are recommended without needing a ton of modifications to get everything to work. Also if anyone has any odd setups they like and would want to share.

Pete_89T2 · 04-07-2013, 07:00 PM

What are you trying to accomplish by doing the transmission swap?

Rotary Evolution · 04-07-2013, 07:05 PM

Quote:

Originally Posted by Pete_89T2

What are you trying to accomplish by doing the transmission swap?

+1

power goals and intended use are quite important.

easiest and cheapest of course being just stock and turbo components.

WankelsRevenge · 04-07-2013, 07:11 PM

Well right now my 2nd and 3rd gear schrynos are on their way out, so a transmission swap will be needed eventually. Sadly Im having problems finding a S4 NA one and was just curious what my other options were without having to do any huge modifications.

Rotary Evolution · 04-07-2013, 07:18 PM

depends on what you mean by huge. but if it's a stock car then just keep looking for a used transmission. you can use a series 5 n/a transmission as well but you will need the crossmember with it from a series 5 car. the rest is all bolt in with no difference.

an FC turbo II transmission will also work but will be a bit spendy since you need the transmission, starter, crossmember, clutch, flywheel, throwout bearing, slave cylinder and a modified driveshaft or ream out the holes in the diff flange with a stock turbo driveshaft.

most anything else would either need an adapter plate with all the above and/or transmission input shaft modification.

you could also just look into having it rebuilt, which usually runs about $600 for the n/a transmission.

***TitaniumTT*** · 04-07-2013, 07:44 PM

I run a 6-spd in my FC.... it bolted to the engine

WankelsRevenge · 04-07-2013, 07:58 PM

Haha, a 6speed out of?????

Rotary Evolution · 04-07-2013, 08:03 PM

Quote:

Originally Posted by WankelsRevenge

Haha, a 6speed out of?????

an RX8, which requires about as much work as the TII transmission which is still more durable, and likely more expensive unless you get lucky. the RX8 also requires a fabricated transmission mount since it uses a power plant frame.

***TitaniumTT*** · 04-07-2013, 08:05 PM

Clearly you don't know about what I've done to this particular transmission to make it fit, work, and stand up behind ~400rwhp and repeated track days..... onto my favorite question,.....

What makes you think the RX8 transmission is weak?

Rotary Evolution · 04-07-2013, 08:07 PM

Quote:

Originally Posted by TitaniumTT

Clearly you don't know about what I've done to this particular transmission to make it fit, work, and stand up behind ~400rwhp and repeated track days..... onto my favorite question,.....

What makes you think the RX8 transmission is weak?

because i know of owners who have repeatedly broken them behind n/a renesis engines.

***TitaniumTT*** · 04-07-2013, 08:26 PM

Define broken.

***TitaniumTT*** · 04-07-2013, 10:32 PM

Whizbang · 04-07-2013, 10:49 PM

i was able to use FB transmissions, but i think i either 1. changed the tail housing (somewhat easier) or just fudge one of the transmission mounts some.

Whizbang · 04-07-2013, 10:50 PM

id like myself some RX8 transmissions. friend has two he would sell me. then i need to talk about fixing them.. (2nd gear is pooped, as you would expect)

***TitaniumTT*** · 04-07-2013, 11:07 PM

because it's weak...... right?

04-07-2013, 07:18 PM	#5
Rotary Evolution rotaryevolution.net Join Date: Feb 2011 Location: Las Vegas, NV iTrader: (0) Posts: 248 Rep Power: 14	depends on what you mean by huge. but if it's a stock car then just keep looking for a used transmission. you can use a series 5 n/a transmission as well but you will need the crossmember with it from a series 5 car. the rest is all bolt in with no difference. an FC turbo II transmission will also work but will be a bit spendy since you need the transmission, starter, crossmember, clutch, flywheel, throwout bearing, slave cylinder and a modified driveshaft or ream out the holes in the diff flange with a stock turbo driveshaft. most anything else would either need an adapter plate with all the above and/or transmission input shaft modification. you could also just look into having it rebuilt, which usually runs about $600 for the n/a transmission. __________________ http://rotaryevolution.net Last edited by Rotary Evolution; 04-07-2013 at 07:22 PM..

04-07-2013, 07:44 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I run a 6-spd in my FC.... it bolted to the engine __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-07-2013, 08:05 PM	#9
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Clearly you don't know about what I've done to this particular transmission to make it fit, work, and stand up behind ~400rwhp and repeated track days..... onto my favorite question,..... What makes you think the RX8 transmission is weak? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-07-2013, 08:26 PM	#11
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Define broken. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-07-2013, 10:32 PM	#12
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	__________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-07-2013, 07:00 PM	#2
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD iTrader: (1) Posts: 874 Rep Power: 15	What are you trying to accomplish by doing the transmission swap?

04-07-2013, 10:49 PM	#13
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	i was able to use FB transmissions, but i think i either 1. changed the tail housing (somewhat easier) or just fudge one of the transmission mounts some. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

04-07-2013, 10:50 PM	#14
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	id like myself some RX8 transmissions. friend has two he would sell me. then i need to talk about fixing them.. (2nd gear is pooped, as you would expect) __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

04-07-2013, 11:07 PM	#15
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	because it's weak...... right? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode