I need your old fucntioning stock coils

FDguy · 01-02-2013, 05:07 PM

What happened to this?

***TitaniumTT*** · 01-02-2013, 05:58 PM

Life got in the way and the cobblers son goes barefoot and my feet are too callassed to really care anymore

RX8 coils are worthless, no one came through with a MySparkDied box and the top contenders aer as they've always been, Quicksilver coils and TII coils, TII coils are a PITA to mount though, I have gotten the QS coils under the UIM of a 13B-RE before.

The QS coils did the same power wise as the M&W CDI setup, but the idle was MUCH better with the inductive coils, I've got a set of LS2 coils so I'll test those against the QS coils if I can find another set of them.

FDguy · 01-02-2013, 08:39 PM

I was really looking forward for the Bosch coil results. I know Full Function Engineering is going or was going to put a kit together using these coils.

I was waiting for them but them FFE said he was having trouble sourcing the coils and didn't how long it was going to take to get the coils. So I went ahead and order a set of ign-1a race coils.

***TitaniumTT*** · 01-02-2013, 08:54 PM

I love my Bosch coils, I plan on testing those vs the LS2 vs the QS coils to see who has it where it counts.

88turboii · 01-07-2013, 07:15 PM

i recently bench tested LS2 truck coils and was not impressed. IGN-1As are decent, but im really impressed with factory FC coils which im going to stick with. im looking at using four FC trailling coils with a subaru 4-channel ignitor on my FD

RX200013B · 01-08-2013, 02:41 PM

Quote:

Originally Posted by 88turboii

im looking at using four FC trailling coils with a subaru 4-channel ignitor on my FD

Could you please explain this to me? thanks

88turboii · 01-08-2013, 07:42 PM

Quote:

Originally Posted by RX200013B

Could you please explain this to me? thanks

if you look at an FC coil, the big metal piece is the ignitor, which is basically an amplifier for the ECU ignition signal. im planning on running four FC coils, but the factory ignitors take up too much space. you could go with an aftermarket 4-channel ignitor. i happen to have a wrx ignitor laying around

C. Ludwig · 01-09-2013, 04:55 AM

How many amps will the Subaru ignitor support?

PSI · 01-11-2013, 03:12 AM

The FC trailing coils are great coils and dirt cheap but if you want the most out of them you need to charge them to 8amps or more (6ms + at 14v from memory). I'm not familiar with WRX ignitors but if they are current limiting then they'll most likely be no good with FC coils since they will probably limit to 7amps and end up overheating and splitting coils. Mitsi Evo and GSR 2 channel ignitors are non-current limiting and work great. Microtech X4 ignitors also work well with FC coils and are non-current limiting.

The ign-1a coils are badass and far better than FC coils, and the fact that they have a built-in 19amp IGBT driver says something.

The ultimate inductive appears to be ICE coils, however I'm working on an ignitor than can cope with 4ms at 24v because nothing else can so far.

BTW the ign-1a coils make more hp than M&W Pro14R CDI. The trick is finding compatible spark plugs, at least with pump gas anyhow. Alcohol is probably no problem.

RICE RACING · 01-11-2013, 05:37 AM

Quote:

Originally Posted by PSI

The FC trailing coils are great coils and dirt cheap but if you want the most out of them you need to charge them to 8amps or more (6ms + at 14v from memory). I'm not familiar with WRX ignitors but if they are current limiting then they'll most likely be no good with FC coils since they will probably limit to 7amps and end up overheating and splitting coils. Mitsi Evo and GSR 2 channel ignitors are non-current limiting and work great. Microtech X4 ignitors also work well with FC coils and are non-current limiting.

The ign-1a coils are badass and far better than FC coils, and the fact that they have a built-in 19amp IGBT driver says something.

The ultimate inductive appears to be ICE coils, however I'm working on an ignitor than can cope with 4ms at 24v because nothing else can so far.

BTW the ign-1a coils make more hp than M&W Pro14R CDI. The trick is finding compatible spark plugs, at least with pump gas anyhow. Alcohol is probably no problem.

LOL at you and your thread on gayclub lol

Detonation can make some more power, not too good for your motor though

Your "test" is about as impartial as an Investment Bank selling CDO's

Pettersen · 01-11-2013, 01:49 PM

Quote:

Originally Posted by 88turboii

i recently bench tested LS2 truck coils and was not impressed. IGN-1As are decent, but im really impressed with factory FC coils which im going to stick with. im looking at using four FC trailling coils with a subaru 4-channel ignitor on my FD

Why not use your FD igniter?

You should be able to get most of the info you need from this, just a few things that would be different on an FD.

How to: use a FD igniter on FC coils in an FC.
http://www.banzai-racing.com/fd_igni...all_how-to.htm

88turboii · 05-06-2013, 10:22 PM

Quote:

Originally Posted by Pettersen

Why not use your FD igniter?

You should be able to get most of the info you need from this, just a few things that would be different on an FD.

How to: use a FD igniter on FC coils in an FC.
http://www.banzai-racing.com/fd_igni...all_how-to.htm

i finally tested the FD ignitor tonight, and it seems to have identical performance as the FC ignitor.. same output and saturates at 4.5ms just like FC.

the subaru ignitor seems to put out more current than the factory FC ignitor. i can squeeze another 25% energy out of the FC coil with the subaru ignitor at 4ms

01-02-2013, 05:58 PM	#47
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Life got in the way and the cobblers son goes barefoot and my feet are too callassed to really care anymore RX8 coils are worthless, no one came through with a MySparkDied box and the top contenders aer as they've always been, Quicksilver coils and TII coils, TII coils are a PITA to mount though, I have gotten the QS coils under the UIM of a 13B-RE before. The QS coils did the same power wise as the M&W CDI setup, but the idle was MUCH better with the inductive coils, I've got a set of LS2 coils so I'll test those against the QS coils if I can find another set of them. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-02-2013, 08:39 PM	#48
FDguy No need for 5.0L Join Date: Jan 2011 Location: San Antonio TX iTrader: (0) Posts: 44 Rep Power: 0	I was really looking forward for the Bosch coil results. I know Full Function Engineering is going or was going to put a kit together using these coils. I was waiting for them but them FFE said he was having trouble sourcing the coils and didn't how long it was going to take to get the coils. So I went ahead and order a set of ign-1a race coils. Last edited by FDguy; 01-02-2013 at 10:08 PM..

01-02-2013, 08:54 PM	#49
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I love my Bosch coils, I plan on testing those vs the LS2 vs the QS coils to see who has it where it counts. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-09-2013, 04:55 AM	#53
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN iTrader: (5) Posts: 494 Rep Power: 17	How many amps will the Subaru ignitor support? __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-02-2013, 05:07 PM	#46
FDguy No need for 5.0L Join Date: Jan 2011 Location: San Antonio TX iTrader: (0) Posts: 44 Rep Power: 0	What happened to this?

01-07-2013, 07:15 PM	#50
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC iTrader: (0) Posts: 395 Rep Power: 17	i recently bench tested LS2 truck coils and was not impressed. IGN-1As are decent, but im really impressed with factory FC coils which im going to stick with. im looking at using four FC trailling coils with a subaru 4-channel ignitor on my FD

01-11-2013, 03:12 AM	#54
PSI The Newbie Join Date: Feb 2012 iTrader: (0) Posts: 18 Rep Power: 0	The FC trailing coils are great coils and dirt cheap but if you want the most out of them you need to charge them to 8amps or more (6ms + at 14v from memory). I'm not familiar with WRX ignitors but if they are current limiting then they'll most likely be no good with FC coils since they will probably limit to 7amps and end up overheating and splitting coils. Mitsi Evo and GSR 2 channel ignitors are non-current limiting and work great. Microtech X4 ignitors also work well with FC coils and are non-current limiting. The ign-1a coils are badass and far better than FC coils, and the fact that they have a built-in 19amp IGBT driver says something. The ultimate inductive appears to be ICE coils, however I'm working on an ignitor than can cope with 4ms at 24v because nothing else can so far. BTW the ign-1a coils make more hp than M&W Pro14R CDI. The trick is finding compatible spark plugs, at least with pump gas anyhow. Alcohol is probably no problem.