How do fix my carbon fiber hood?

fastasdee · 09-20-2012, 04:40 PM

Save your money and get a new one, cause that looks like crap. Sorry

FDDandata · 09-20-2012, 06:04 PM

It looks a little better but it looked like some of the "carbon fiber" faded away. Dont know if it'll get better with more clear coats, so i'd consider blacking it out like you said.

Raksj04 · 09-20-2012, 07:36 PM

This was with one can of spray paint while I was outside on a windy day. I need to try to work on it. I plan on resanding do to my crappy spraying. I am going to try 1000 grit.

I_H8_Pistons · 09-28-2012, 12:37 PM

I have re-cleared a carbon fiber hood before it wasn't this bad but it had some sun damage.

Wet sand it with 600-800 grit sand paper, then move up to 1K grit sand paper wet sand. blow it off get all the dust off the surface to be sprayed. You can go to a body shop, sherwin williams get them to mix you up some clear coat to use in a spray gun (which you can purcahse a decent one form home depot that will do the job). with the hood off and on low stands lightly coat the hood with the clear should take bout 2-3 good coats, let it dry for at least a day then buff it with a high speed buffer keeping the speed at 1k to 1,500 rpm light compound, last just wax it and boom.

Unfortunitly i don't have any pics of the hood i did i will see if can get them from the kid i did it for but it wasn't really hard just take your time.

Raksj04 · 09-28-2012, 03:25 PM

Quote:

Originally Posted by I_H8_Pistons

I have re-cleared a carbon fiber hood before it wasn't this bad but it had some sun damage.

Wet sand it with 600-800 grit sand paper, then move up to 1K grit sand paper wet sand. blow it off get all the dust off the surface to be sprayed. You can go to a body shop, sherwin williams get them to mix you up some clear coat to use in a spray gun (which you can purcahse a decent one form home depot that will do the job). with the hood off and on low stands lightly coat the hood with the clear should take bout 2-3 good coats, let it dry for at least a day then buff it with a high speed buffer keeping the speed at 1k to 1,500 rpm light compound, last just wax it and boom.

Unfortunitly i don't have any pics of the hood i did i will see if can get them from the kid i did it for but it wasn't really hard just take your time.

I don't have any air. I would have to use battery powered tools

Mazdabater · 09-29-2012, 02:58 AM

All the people saying to throw it are retarted, it's only the clearcoat that looks fucked, and would only be the top layer of the carbon. Came up ok, sand it until it looks nice and your going to need a few coats of clear on it. 1k is unnecessary, I did my whole car with 800.

You would be better off getting someone to spray it in a booth if you wanted it 100%, would be a better option then getting a new one

Red Baron · 11-13-2012, 12:50 PM

I am wrapping mine, saw a Camaro with it and the finish looks unreal!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-20-2012, 04:40 PM	#16
fastasdee Fast as dee Join Date: Sep 2012 Location: Fort Lauderdale iTrader: (0) Posts: 5 Rep Power: 0	Save your money and get a new one, cause that looks like crap. Sorry

09-20-2012, 06:04 PM	#17
FDDandata The Newbie Join Date: Dec 2009 Location: Brooklyn, NY iTrader: (0) Posts: 27 Rep Power: 0	It looks a little better but it looked like some of the "carbon fiber" faded away. Dont know if it'll get better with more clear coats, so i'd consider blacking it out like you said.

09-20-2012, 07:36 PM	#18
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	This was with one can of spray paint while I was outside on a windy day. I need to try to work on it. I plan on resanding do to my crappy spraying. I am going to try 1000 grit.

09-28-2012, 12:37 PM	#19
I_H8_Pistons Jay's UTR Join Date: Feb 2012 Location: Baltimore,Md iTrader: (0) Posts: 9 Rep Power: 0	I have re-cleared a carbon fiber hood before it wasn't this bad but it had some sun damage. Wet sand it with 600-800 grit sand paper, then move up to 1K grit sand paper wet sand. blow it off get all the dust off the surface to be sprayed. You can go to a body shop, sherwin williams get them to mix you up some clear coat to use in a spray gun (which you can purcahse a decent one form home depot that will do the job). with the hood off and on low stands lightly coat the hood with the clear should take bout 2-3 good coats, let it dry for at least a day then buff it with a high speed buffer keeping the speed at 1k to 1,500 rpm light compound, last just wax it and boom. Unfortunitly i don't have any pics of the hood i did i will see if can get them from the kid i did it for but it wasn't really hard just take your time.

09-29-2012, 02:58 AM	#21
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS iTrader: (0) Posts: 326 Rep Power: 15	All the people saying to throw it are retarted, it's only the clearcoat that looks fucked, and would only be the top layer of the carbon. Came up ok, sand it until it looks nice and your going to need a few coats of clear on it. 1k is unnecessary, I did my whole car with 800. You would be better off getting someone to spray it in a booth if you wanted it 100%, would be a better option then getting a new one

11-13-2012, 12:50 PM	#22
Red Baron The Newbie Join Date: Mar 2009 iTrader: (0) Posts: 19 Rep Power: 0	I am wrapping mine, saw a Camaro with it and the finish looks unreal!