blow through nikki

mattallac · 07-21-2012, 02:16 AM

well have a side project fb drift car a friend and i are building with all of our spare parts and cars ,has anyone done a blow through nikki ? all im gonna run is 8psi max on my n/a 12a . the car will be drift only trailered to the track ,if the motor pops in goes another junk yard motor. any help would be greatly appreciated.

mattallac · 07-21-2012, 11:09 PM

8 psi is pretty low in my opinion , webber for 500 is a little steep for our budget and i can drill the jets for more fuel if needed .rotary shack makes a turbo hat for the nikki so i would think it has been done before

mattallac · 07-23-2012, 12:24 AM

I guess we have a communication problem , a BOX and a HAT are two different things ,and the least of my worries. I am looking for someone who has moded the nikki carb before for a turbo application. ( power valve , e tubes ,plugs ,etc) I really don"t need opinions ( not to be rude ) ,just some tech from someone who has done this before. thanks

730RWHP12A · 08-08-2012, 06:02 PM

boost prepping a nikki is easy. pull off the smog crap, make the secondaries mechanical, drill the acc pump squirter, jb weld up any open holes. done.. you will still need to jet the carb. what size is the turbo?

mattallac · 08-09-2012, 12:54 AM

the turbo is a t3/t4 we are only gonna run 5 to 7 psi on an na motor . you know about what to do for the distributor ? Q- drill out the acc pump :how ?

730RWHP12A · 09-04-2012, 11:44 AM

Quote:

Originally Posted by mattallac

the turbo is a t3/t4 we are only gonna run 5 to 7 psi on an na motor . you know about what to do for the distributor ? Q- drill out the acc pump :how ?

the distributor needs to be locked so the timing does not advance 30 degrees when your making boost. the timing should be set at 15 degrees advance total, more boost, less timing..
to drill out the accel squirter remove it and use a jet drill set to enlarge the holes. i will measure the one i use an get back to you ...

mattallac · 09-04-2012, 10:56 PM

cool thanks

mattallac · 09-07-2012, 12:31 AM

well the distributer is done now i have the carb open looks like 3 jets per bank , so drill the jets that are in line with the squirter correct? leave the other jets alone ?

Derbot24 · 11-13-2015, 09:12 PM

I am also looking to find out what I need to make it a blow through carb.

07-21-2012, 02:16 AM	#1
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. iTrader: (1) Posts: 176 Rep Power: 0	blow through nikki well have a side project fb drift car a friend and i are building with all of our spare parts and cars ,has anyone done a blow through nikki ? all im gonna run is 8psi max on my n/a 12a . the car will be drift only trailered to the track ,if the motor pops in goes another junk yard motor. any help would be greatly appreciated.

08-08-2012, 06:02 PM	#4
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california iTrader: (8) Posts: 349 Rep Power: 17	boost prepping a nikki is easy. pull off the smog crap, make the secondaries mechanical, drill the acc pump squirter, jb weld up any open holes. done.. you will still need to jet the carb. what size is the turbo? __________________ rotaryshack.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-21-2012, 11:09 PM	#2
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. iTrader: (1) Posts: 176 Rep Power: 0	8 psi is pretty low in my opinion , webber for 500 is a little steep for our budget and i can drill the jets for more fuel if needed .rotary shack makes a turbo hat for the nikki so i would think it has been done before

07-23-2012, 12:24 AM	#3
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. iTrader: (1) Posts: 176 Rep Power: 0	I guess we have a communication problem , a BOX and a HAT are two different things ,and the least of my worries. I am looking for someone who has moded the nikki carb before for a turbo application. ( power valve , e tubes ,plugs ,etc) I really don"t need opinions ( not to be rude ) ,just some tech from someone who has done this before. thanks

08-09-2012, 12:54 AM	#5
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. iTrader: (1) Posts: 176 Rep Power: 0	the turbo is a t3/t4 we are only gonna run 5 to 7 psi on an na motor . you know about what to do for the distributor ? Q- drill out the acc pump :how ?

09-04-2012, 10:56 PM	#7
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. iTrader: (1) Posts: 176 Rep Power: 0	cool thanks

09-07-2012, 12:31 AM	#8
mattallac Rotary Fanatic Join Date: Aug 2011 Location: crockett ca. iTrader: (1) Posts: 176 Rep Power: 0	well the distributer is done now i have the carb open looks like 3 jets per bank , so drill the jets that are in line with the squirter correct? leave the other jets alone ?

11-13-2015, 09:12 PM	#9
Derbot24 The Newbie Join Date: Nov 2015 iTrader: (0) Posts: 1 Rep Power: 0	I am also looking to find out what I need to make it a blow through carb.