FS. NRS 3mm 1 piece ceramic seals

To_Slow · 06-21-2012, 11:30 AM

I have a set of brand new 3mm 1 pice ceramic seals for sale.
Paid 1700+ about 2 years ago, never used them My loss your gain
1000.00 shipped

Thank you
Chip U

DriFD3S · 06-22-2012, 04:31 AM

Great deal,
Someone buy these.
GLWS.

To_Slow · 06-24-2012, 06:15 PM

For those that are thinking about getting these and do don't have the 3mm milled in to there rotors, i will offer a very good price on the 3mm EDM service.

http://www.chipsmotorsports.com/serv...seal-machining

To_Slow · 06-29-2012, 05:46 AM

price drop 900.00 shipped

To_Slow · 07-04-2012, 10:33 PM

800.00. new price

To_Slow · 07-08-2012, 06:51 AM

BUY MEEEE

... lol

jrallemanrotarybuilder · 07-08-2012, 04:39 PM

Chip , first i need to send you some irons for resurfacing ect. We spoke months ago and i even sent you a photo of my rear iron water damage . Sorry Had to deal with some issues with my back (pinched nerves) . I am almost finished paying the very large deductible for all the scans doctors and specialists You told me that you could at least remove 50% of the damage .... hopefully more . I was wondering if like xtream roatrys , if you had a good shop that could correct the depth of the water seal groves if too much has to be removed..? I already have south cost seals install (3mm) but to have the ceramic would obviously be a big upgrade , not to mention my new rotor housings would like me better. I will hopefully be sending them very soon , in the next 10 days . I will contact you before they arrive . You have the absolute best prices for resurfacing and tempering the iron plates & are much closer than others that do this . If this latest engine build goes through I will contact you to see if you still have the NRS apex seals . Have you heard from rice about his corner seals , I spoke to rob @ pineapple and he was still not telling me much about testing .

06-22-2012, 04:31 AM	#2
DriFD3S Rotary Fanatic Join Date: Jan 2009 Location: Edmonton, AB, Canada iTrader: (0) Posts: 174 Rep Power: 0	Great deal, Someone buy these. GLWS. __________________ *Live the DriFD3S or die trying.* JDM True Story. the Vacuum line, to my MAP became detached while I was legally drifting. my engine would not rev past 2500, and idled from 300-650 and was stalling. Fortunately, I acquired a Zip-Tie. I fixed a catastrophic engine failure, With a Zip-Tie. JDM FTW.

06-24-2012, 06:15 PM	#3
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	For those that are thinking about getting these and do don't have the 3mm milled in to there rotors, i will offer a very good price on the 3mm EDM service. http://www.chipsmotorsports.com/serv...seal-machining __________________ My link

06-29-2012, 05:46 AM	#4
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	price drop 900.00 shipped __________________ My link

07-04-2012, 10:33 PM	#5
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	800.00. new price __________________ My link

07-08-2012, 06:51 AM	#6
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	BUY MEEEE ... lol __________________ My link

07-08-2012, 04:39 PM	#7
jrallemanrotarybuilder The Newbie Join Date: Jul 2012 Location: BATON ROUGE , LA. iTrader: (0) Posts: 6 Rep Power: 0	Chip , first i need to send you some irons for resurfacing ect. We spoke months ago and i even sent you a photo of my rear iron water damage . Sorry Had to deal with some issues with my back (pinched nerves) . I am almost finished paying the very large deductible for all the scans doctors and specialists You told me that you could at least remove 50% of the damage .... hopefully more . I was wondering if like xtream roatrys , if you had a good shop that could correct the depth of the water seal groves if too much has to be removed..? I already have south cost seals install (3mm) but to have the ceramic would obviously be a big upgrade , not to mention my new rotor housings would like me better. I will hopefully be sending them very soon , in the next 10 days . I will contact you before they arrive . You have the absolute best prices for resurfacing and tempering the iron plates & are much closer than others that do this . If this latest engine build goes through I will contact you to see if you still have the NRS apex seals . Have you heard from rice about his corner seals , I spoke to rob @ pineapple and he was still not telling me much about testing .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode