1983 Limited Edition Resto/with some goodies

WE3RX7 · 03-15-2012, 02:36 PM

Is it dual pass?

2gslse · 03-15-2012, 03:00 PM

Looks great sitting there but it will look better in a RUNNING car lol...
Now get back in there and wire everything up.

BTW... is there a bung for low coolant light/buzzer? not a big deal just asking, mine won't work when everything is done either since it will be a v-mount if it gets that low it is a major issue.

one320fc · 03-15-2012, 03:16 PM

Quote:

Originally Posted by WE3RX7

Is it dual pass?

This sounds bad but I have no idea its not listed in the part discription

Quote:

Originally Posted by 2gslse

Looks great sitting there but it will look better in a RUNNING car lol...
Now get back in there and wire everything up.

BTW... is there a bung for low coolant light/buzzer? not a big deal just asking, mine won't work when everything is done either since it will be a v-mount if it gets that low it is a major issue.

It does not have a bung for that sensor..hmmm I dont know how big of a deal that is?? I plan on running a electric fan with thermostat control

2gslse · 03-15-2012, 03:38 PM

Quote:

Originally Posted by one320fc

This sounds bad but I have no idea its not listed in the part discription

Looks like it is a dual pass. the inlet and outlet are on the same side and the tube run horizontally so it goes all the way across and back to the outlet, there will be a division in the tank with the inlet and outlet.

It does not have a bung for that sensor..hmmm I dont know how big of a deal that is?? I plan on running a electric fan with thermostat control

its not a big deal really, just have to ground the wire to the chassis to shut it up.

WE3RX7 · 03-15-2012, 04:14 PM

Is there a weld in the middle of the tanks, usually on the side that's polished...

That buzzer is insane.. Pretty sure there will be some left over wire to use to ground it out. That is if of course Chris can pinpoint which wire it is that goes to the coolant buzzer

2gslse · 03-15-2012, 04:21 PM

Quote:

Originally Posted by WE3RX7

Is there a weld in the middle of the tanks, usually on the side that's polished...

That buzzer is insane.. Pretty sure there will be some left over wire to use to ground it out. That is if of course Chris can pinpoint which wire it is that goes to the coolant buzzer

Yeah, time for him to stop posting and start working. summer is right around the corner and DGRR is soon just in case he could make it.

TIC-TOC...

I'm still

for mine

WE3RX7 · 03-15-2012, 07:54 PM

Him posting is probably my fault... I keep harrassing him. I need more pics, lol...

one320fc · 03-16-2012, 07:37 AM

Quote:

Originally Posted by 2gslse

Yeah, time for him to stop posting and start working. summer is right around the corner and DGRR is soon just in case he could make it.

TIC-TOC...

I'm still

for mine

Had enough out of you!

Mr. Apexi powerd FD..Mr Apexi powered FB and a sweet RX-8!!! I only got to spend $700 bucks and I still dont have everything I need....

2gslse · 03-16-2012, 09:54 AM

Tic-Toc

at least you are making progress on your car. you are within a few days labor of driving around again and not much money. My car will have 400+HP if all goes right but the boost settings will make go from lots of fun (low boost) to replace axle/ call a wrecker mode(high boost).
Still don't think deals is a possibility?

WE3RX7 · 04-23-2012, 02:15 PM

Here's some ideas for mounting on the radiator and the coils:

one320fc · 06-20-2012, 06:15 PM

Well its been a while and a hard year for me, but hey that's what life is a bunch of ups and downs...I got back into the garage over this past weekend after a few months of not even looking at my car. And I feel like I made progress even though I took more crap apart..So little back story this car sat at my parents for a few years while I did nothing to it, and when I got back to it realized it had some visitors of the furry four legged variety. So needless to say I found some things and smells that are not good to find in your beloved RX7. So here are some updated pictures!!
2012-06-17_21-54-46_575.jpg
Cleaned out some droppings and other things
2012-06-17_21-55-07_268.jpg
Cleaned and shampoo
2012-06-20_16-16-54_595.jpg

2gslse · 06-22-2012, 08:22 PM

OK time to say it..

Stop dragging your feet and put it back together enough to hear it start and run. at this rate we won't be able to buy fuel anymore but it will look good sitting in the garage

JK man I know why it had to come out but I would like to see it run this year.

one320fc · 06-23-2012, 10:44 PM

Quote:

Originally Posted by 2gslse

OK time to say it..

Stop dragging your feet and put it back together enough to hear it start and run. at this rate we won't be able to buy fuel anymore but it will look good sitting in the garage

JK man I know why it had to come out but I would like to see it run this year.

Geez cant ever catch a break with you..it will run this year! Billy and I are hashing out my exhaust issues..i need your old wheels and a cat please

Oh and another thing your nice rew swap looks good but should have at least cleaned your bay lol

2gslse · 06-23-2012, 10:48 PM

I almost had a cat tonight but I don't see how a dead cat will help you with the exhaust

I think all my old cats were welded together but we can have a look,they certainly wont work for me anymore.

WE3RX7 · 06-24-2012, 11:57 AM

I told MC if I had free time I would have snuck over there this weekend and finished her up, lol...

03-15-2012, 03:00 PM	#122
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	Looks great sitting there but it will look better in a RUNNING car lol... Now get back in there and wire everything up. BTW... is there a bung for low coolant light/buzzer? not a big deal just asking, mine won't work when everything is done either since it will be a v-mount if it gets that low it is a major issue. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

03-16-2012, 09:54 AM	#129
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	Tic-Toc at least you are making progress on your car. you are within a few days labor of driving around again and not much money. My car will have 400+HP if all goes right but the boost settings will make go from lots of fun (low boost) to replace axle/ call a wrecker mode(high boost). Still don't think deals is a possibility? __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

06-20-2012, 06:15 PM	#131
one320fc one Apex @ a time Join Date: Feb 2008 Location: Culpeper VA iTrader: (1) Posts: 272 Rep Power: 17	Well its been a while and a hard year for me, but hey that's what life is a bunch of ups and downs...I got back into the garage over this past weekend after a few months of not even looking at my car. And I feel like I made progress even though I took more crap apart..So little back story this car sat at my parents for a few years while I did nothing to it, and when I got back to it realized it had some visitors of the furry four legged variety. So needless to say I found some things and smells that are not good to find in your beloved RX7. So here are some updated pictures!! 2012-06-17_21-54-46_575.jpg Cleaned out some droppings and other things 2012-06-17_21-55-07_268.jpg Cleaned and shampoo 2012-06-20_16-16-54_595.jpg __________________ 1983 Limited Edition SOLD 1977 Mazda REPU I will work on it one day I sware!! 1987 T2 um after the repu is done?? 2013 Chrysler 200 DD 2009 Dodge Journey 94 Volvo 850 N/A The slowest car I have EVER owned!!! Last edited by one320fc; 06-20-2012 at 06:17 PM.. Reason: typo

06-22-2012, 08:22 PM	#132
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	OK time to say it.. Stop dragging your feet and put it back together enough to hear it start and run. at this rate we won't be able to buy fuel anymore but it will look good sitting in the garage JK man I know why it had to come out but I would like to see it run this year. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

06-23-2012, 10:48 PM	#134
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	I almost had a cat tonight but I don't see how a dead cat will help you with the exhaust I think all my old cats were welded together but we can have a look,they certainly wont work for me anymore. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

03-15-2012, 02:36 PM	#121
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Is it dual pass?

03-15-2012, 04:14 PM	#125
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Is there a weld in the middle of the tanks, usually on the side that's polished... That buzzer is insane.. Pretty sure there will be some left over wire to use to ground it out. That is if of course Chris can pinpoint which wire it is that goes to the coolant buzzer

03-15-2012, 07:54 PM	#127
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Him posting is probably my fault... I keep harrassing him. I need more pics, lol...

04-23-2012, 02:15 PM	#130
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Here's some ideas for mounting on the radiator and the coils:

06-24-2012, 11:57 AM	#135
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	I told MC if I had free time I would have snuck over there this weekend and finished her up, lol...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode