FS: 2004 RX8 with new engine

2gslse · 01-13-2012, 02:23 PM

I'm selling a 2004 Brilliant Black Mazda RX8. 6 Speed manual. The car was purchased by me at around 150K miles and a low compression engine. Since that time, a Mazda reman was purchased, torn down, all clearances checked and light cleaning of the ports was performed before the engine was restacked and put in the car. The car has about 170K miles on it now and the engine is fully broken in. The car is equipped with the following parts:

- Reman Mazda engine with roughly 20k miles (rebuilt only to verify side seal clearances and to clean the ports up a bit)
- GReddy 32-way coilovers
- New Clutch and Mazdaspeed flywheel and counterweight
- Racing Beat headers
- Custom full Magnaflow exhaust from the headers back to include a Magnaflow hi-flo cat and muffler. Great sound and not over the top loud.
- 19" wheels with new Cooper rubber (less than 20k miles on the tires)
- AutoEXE fiberglass hood (this hood is over $1,000 to buy new)
- Tinted windows all around (including slight tint on front windshield).
- Sohn OMP adapter kit with custom oil resevoir (this allows the use of fresh oil from a secondary source instead of spending used engine oil in the OMP)
- New aluminum radiator

This setup made 194RWHP after engine break-in. The car has just been an extra vehicle around the house and a simple project, but my attention has turned to other projects at this time. The only known issues at this is the front speakers are not working and it did have an issue with the electric power steering sensor, but after cleaning the contacts it has been fine for several weeks without a hiccup. Must drive to appreciate.

I'm asking $8,500obo. The aftermarket equipment on this car alone is worth about $6,000. That doesn't include the reman engine core and rebuild! This car has at least $10k invested. It's just time to move on to other projects. I have owned and built countless rotary powered cars in the past, so don't hesitate to ask specifics about this car.

These are some photos (sorry for the black/white on most, I'll get some new ones if needed).

I also have the original OEM hood, stock wheels/tires and an unmarried Access Port tuner available with the car as well. Feel free to ask questions and make offers! If you ask around, there are some forum members who've seen the car in person and know the quality of the work performed.

This would be a great weekend warrior, auto-x or TT car.

WE3RX7 · 01-13-2012, 02:29 PM

Left a few things out of that list of add-ons huh?

I will throw up there that this car also has Mercury Marine coils which bested both the Bosch and LS1 coils on the last little test we ran at Speed1.

I've driven this car and watched him build it, it's a great car for somebody to take and beat down some cones with!

rx7 vinnie · 01-13-2012, 11:37 PM

Damn.. Already?

2gslse · 01-14-2012, 09:09 AM

Quote:

Originally Posted by rx7 vinnie

Damn.. Already?

I think its time. I love the car but my turbo Fb is going to finished soon and I cant drive all of them as much as I would like to. It has been a great car and I'm gonna miss it.

Vinnie, how is your car coming along? are you going to DGRR this year?

I forgot the car also has the entire Racing Beat intake system and I installed the engine at 158,000 and currently the car has 170,000 so its only 12,000 miles on the engine.

rx7 vinnie · 01-14-2012, 10:02 AM

Man just working on the track car and getting it ready for the auto-x season. The other FC is on the back burner BC I had a ADD moment and bought a 2012 Harley davidson Fatboy Lo.... Somebody help me.

2gslse · 01-16-2012, 09:34 PM

Bump

fire85gslse · 01-18-2012, 10:07 PM

Looks nice, if my repu was sold along with some other stuff I might could pick her up.

2gslse · 01-19-2012, 09:48 PM

What shape is the Repu in? maybe partial trade or I may be interested in it outright.

WE3RX7 · 01-19-2012, 10:28 PM

Oh lord, lol....

fire85gslse · 01-19-2012, 10:30 PM

Quote:

Originally Posted by rx7 vinnie

Man just working on the track car and getting it ready for the auto-x season. The other FC is on the back burner BC I had a ADD moment and bought a 2012 Harley davidson Fatboy Lo.... Somebody help me.

Vin, lets hope were both their this year. Last year sucked!

speedjunkie · 01-20-2012, 07:36 AM

Quote:

Originally Posted by WE3RX7

Oh lord, lol....

LOL! I think this could apply to many of us for the same reasons lol.

I told my brother about this car since he's been looking for one, but I haven't heard anything back yet.

2gslse · 01-26-2012, 07:09 PM

Nobody? any offers? I will remove the hood and put the stock one on to lower the price

splash67 · 01-29-2012, 03:42 PM

Would you sell the hood???

2gslse · 01-30-2012, 07:50 PM

Quote:

Originally Posted by splash67

Would you sell the hood???

If the car sells without the hood it will be for sale afterwards but I'm not going to remove it at this time.

rx7 vinnie · 01-30-2012, 08:59 PM

It would make me a nice daily.....

01-13-2012, 02:23 PM	#1
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	FS: 2004 RX8 with new engine I'm selling a 2004 Brilliant Black Mazda RX8. 6 Speed manual. The car was purchased by me at around 150K miles and a low compression engine. Since that time, a Mazda reman was purchased, torn down, all clearances checked and light cleaning of the ports was performed before the engine was restacked and put in the car. The car has about 170K miles on it now and the engine is fully broken in. The car is equipped with the following parts: - Reman Mazda engine with roughly 20k miles (rebuilt only to verify side seal clearances and to clean the ports up a bit) - GReddy 32-way coilovers - New Clutch and Mazdaspeed flywheel and counterweight - Racing Beat headers - Custom full Magnaflow exhaust from the headers back to include a Magnaflow hi-flo cat and muffler. Great sound and not over the top loud. - 19" wheels with new Cooper rubber (less than 20k miles on the tires) - AutoEXE fiberglass hood (this hood is over $1,000 to buy new) - Tinted windows all around (including slight tint on front windshield). - Sohn OMP adapter kit with custom oil resevoir (this allows the use of fresh oil from a secondary source instead of spending used engine oil in the OMP) - New aluminum radiator This setup made 194RWHP after engine break-in. The car has just been an extra vehicle around the house and a simple project, but my attention has turned to other projects at this time. The only known issues at this is the front speakers are not working and it did have an issue with the electric power steering sensor, but after cleaning the contacts it has been fine for several weeks without a hiccup. Must drive to appreciate. I'm asking $8,500obo. The aftermarket equipment on this car alone is worth about $6,000. That doesn't include the reman engine core and rebuild! This car has at least $10k invested. It's just time to move on to other projects. I have owned and built countless rotary powered cars in the past, so don't hesitate to ask specifics about this car. These are some photos (sorry for the black/white on most, I'll get some new ones if needed). I also have the original OEM hood, stock wheels/tires and an unmarried Access Port tuner available with the car as well. Feel free to ask questions and make offers! If you ask around, there are some forum members who've seen the car in person and know the quality of the work performed. This would be a great weekend warrior, auto-x or TT car. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

01-13-2012, 02:29 PM	#2
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Left a few things out of that list of add-ons huh? I will throw up there that this car also has Mercury Marine coils which bested both the Bosch and LS1 coils on the last little test we ran at Speed1. I've driven this car and watched him build it, it's a great car for somebody to take and beat down some cones with! Last edited by TitaniumTT; 02-23-2012 at 09:19 PM.. Reason: LS1 coils, not LS2

01-13-2012, 11:37 PM	#3
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	Damn.. Already? __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

01-14-2012, 10:02 AM	#5
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	Man just working on the track car and getting it ready for the auto-x season. The other FC is on the back burner BC I had a ADD moment and bought a 2012 Harley davidson Fatboy Lo.... Somebody help me. __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

01-16-2012, 09:34 PM	#6
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	Bump __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

01-18-2012, 10:07 PM	#7
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN iTrader: (0) Posts: 1,029 Rep Power: 18	Looks nice, if my repu was sold along with some other stuff I might could pick her up.

01-19-2012, 09:48 PM	#8
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	What shape is the Repu in? maybe partial trade or I may be interested in it outright. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

01-19-2012, 10:28 PM	#9
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Oh lord, lol....

01-26-2012, 07:09 PM	#12
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	Nobody? any offers? I will remove the hood and put the stock one on to lower the price __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

01-29-2012, 03:42 PM	#13
splash67 The Newbie Join Date: Jan 2012 iTrader: (0) Posts: 3 Rep Power: 0	Would you sell the hood???

01-30-2012, 08:59 PM	#15
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	It would make me a nice daily..... __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode