|
Introduce yourself!! Tell me something about you and your history with rotary.. |
|
Thread Tools | Display Modes |
10-21-2011, 02:30 PM | #1 |
2006 Silver RX-8
|
Greetings from Canada
Hi all - following the prompts after registering for the forum and introducing myself to the group. After lusting for the RX-7 through my early (and broke) years, I went for a rotary last year and purchased a used 2006 Silver RX-8. I've only ever driven 'practical' vehicles previously, so this has been a treat!
|
10-22-2011, 12:05 AM | #3 |
I've been Wankeled!
|
Welcome to RCC. There are a few of us Canucks on here. Have fun with your Rx-8.
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
10-26-2011, 03:10 AM | #5 |
Rotary Fanatic
|
If you ever happen to drive 3000KM from where you are, to where I am,
I would be happy to go on a cruise with you!
__________________
Live the DriFD3S or die trying. JDM True Story. the Vacuum line, to my MAP became detached while I was legally drifting. my engine would not rev past 2500, and idled from 300-650 and was stalling. Fortunately, I acquired a Zip-Tie. I fixed a catastrophic engine failure, With a Zip-Tie. JDM FTW. |