Fd belgium fortune build

RX SE7EN · 07-05-2011, 06:28 PM

Isn't the tack the most important gauge to have directly in front of you?

Rx_sam · 07-06-2011, 08:00 AM

the tach is in a better position because the steering wheel doesn't blok a piece of the vieuw.
my opinion

Rx_sam · 07-07-2011, 08:18 AM

these are the wheels i have ordered yesterday Asanti Af 164
19" x 9" -6 and 19" x 12" -34

My5ABaby · 07-07-2011, 08:52 AM

Quote:

Originally Posted by RX SE7EN

Isn't the tack the most important gauge to have directly in front of you?

Perhaps I'm just odd, but it's the gauge I check the least. I know what gear I'm in because I'm the one shifting and I know round-about what my speed is, so I more or less know what my RPMs are based upon those two things so I have no real reason to look at it. Couple that with the sound of the engine/exhaust and there's not a huge need to look at the tach.

That said, I have no sensory input (e.g. sound, sight) of fuel/oil pressure, coolant temp, etc. without a gauge.

Rx_sam · 07-13-2011, 02:26 PM

i was bit bored and took a picture of the dashbord with the lights on

To_Slow · 07-13-2011, 04:06 PM

Quote:

Originally Posted by Rx_sam

these are the wheels i have ordered yesterday Asanti Af 164
19" x 9" -6 and 19" x 12" -34

I have that same design in my CAD program, i cold have made you a set SUPER CONCAVE for the same price you paying for flat face option you going with.
http://www.chipsmotorsports.com/forged-wheels That design is not listed on my web site but i do have it

....

Next time... great build by the way.

Chip U

Rx_sam · 07-14-2011, 01:33 AM

damn if i had know that ....
but it's to late to cancel they are allready been ordered for a while

Rx_sam · 07-16-2011, 03:56 PM

making some fiberglas parts to hide the backing of the headlighs

MaczPayne · 07-17-2011, 11:39 PM

The attention to detail is staggering!

Rx_sam · 07-20-2011, 02:18 AM

making of inner fenders

Rx_sam · 07-22-2011, 03:02 PM

some parts arrived again

the first layer of fiberglass

Rx_sam · 07-30-2011, 12:10 PM

little update again

last piece of the dashbord finished and goes open with a touchless sensor i made myself

she cried for fuel so badly i had to fill her up....

some further progress of the kit.

flip flop to hide licence and have better air flow for the cooling of course

engine ready to start just need the trottle pipe back from the welder

Rx_sam · 08-03-2011, 12:14 PM

seats ready for custom carbon fiber backing

the side's will be painted in lavagrey

Rx_sam · 08-26-2011, 04:32 AM

making alu plate for under the engine and reinforcement for the bumper

and sprayed some pieces with spray filler for the last faults and see the shapes better

speedjunkie · 08-26-2011, 11:20 PM

That aluminum plate for under the car is baller!

07-06-2011, 08:00 AM	#47
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	the tach is in a better position because the steering wheel doesn't blok a piece of the vieuw. my opinion __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-07-2011, 08:18 AM	#48
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	these are the wheels i have ordered yesterday Asanti Af 164 19" x 9" -6 and 19" x 12" -34 __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-13-2011, 02:26 PM	#50
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	i was bit bored and took a picture of the dashbord with the lights on __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-14-2011, 01:33 AM	#52
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	damn if i had know that .... but it's to late to cancel they are allready been ordered for a while __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-16-2011, 03:56 PM	#53
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	making some fiberglas parts to hide the backing of the headlighs __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-05-2011, 06:28 PM	#46
RX SE7EN Rotary Fanatic Join Date: Feb 2010 iTrader: (0) Posts: 183 Rep Power: 15	Isn't the tack the most important gauge to have directly in front of you?

07-17-2011, 11:39 PM	#54
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	The attention to detail is staggering! __________________ Johnson TA FC in the works!

07-20-2011, 02:18 AM	#55
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	making of inner fenders __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-22-2011, 03:02 PM	#56
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	some parts arrived again the first layer of fiberglass __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-30-2011, 12:10 PM	#57
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	little update again last piece of the dashbord finished and goes open with a touchless sensor i made myself she cried for fuel so badly i had to fill her up.... some further progress of the kit. flip flop to hide licence and have better air flow for the cooling of course engine ready to start just need the trottle pipe back from the welder __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

08-03-2011, 12:14 PM	#58
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	seats ready for custom carbon fiber backing the side's will be painted in lavagrey __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

08-26-2011, 04:32 AM	#59
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	making alu plate for under the engine and reinforcement for the bumper and sprayed some pieces with spray filler for the last faults and see the shapes better __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

08-26-2011, 11:20 PM	#60
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	That aluminum plate for under the car is baller!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode