Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

***TitaniumTT*** · 05-27-2011, 09:32 PM

That would be cutting you a deal biotch! I bill out at least $75/hr

hades · 05-27-2011, 11:59 PM

I thought you meant you needed to build a trailer for the jeep to pull the 7 with a rack for tires. Guess not....

hades · 05-28-2011, 12:00 AM

oh - and what ever trailer you make should be able to go off road when GRASS!! appears.

***TitaniumTT*** · 05-28-2011, 06:33 AM

Quote:

Originally Posted by hades

oh - and what ever trailer you make should be able to go off road when GRASS!! appears.

haahahaahahahahaaaa

Quote:

Originally Posted by hades

I thought you meant you needed to build a trailer for the jeep to pull the 7 with a rack for tires. Guess not....

I was thinking about it, but that would cost a ton of coin. I keep looking for car trailers, and if I can find one for about a grand I'd pick it up and put a tire rack on it, but they always seem to go for more than that. I really don't like abusing my truck like that. She's still got a stock clutch and stock brakes. The stock clutch has about 163k on it so I don't want to really press my luck. The whole trailer and car would weigh in excess of 5k lbs, where a little auto-x trailer would weigh....maybe 500lbs?

Here's a custom hitch for an RX8.... guy claims it took him TWENTY-FIVE hours start to finish on this hitch.....

hades · 05-28-2011, 10:37 AM

wow. 25 hours. sounds like one of my suppliers trying to pull a fast one.

hades · 05-28-2011, 10:38 AM

IMO a hitch wouldn't be bad if you could hide it for daily use. A custom bumper cover or plug? or make easy to remove?

***TitaniumTT*** · 05-28-2011, 01:47 PM

Quote:

Originally Posted by hades

wow. 25 hours. sounds like one of my suppliers trying to pull a fast one.

Fab work takes time, more than you think. There's estimnated time, then there's the time it should take, then there's the time it did take, and then there's what I call Brian time. I can see that taking a full 2 days, the bumper probably came on and off a "bazzillion" times

***TitaniumTT*** · 05-28-2011, 01:50 PM

Quote:

Originally Posted by hades

IMO a hitch wouldn't be bad if you could hide it for daily use. A custom bumper cover or plug? or make easy to remove?

It'll be very easy to remove. Going to mount to where the stock rear tow hooks do so it'll come off with an impack in a bout 14 seconds

Mazdabater · 05-28-2011, 08:24 PM

If that actually took that guy 25hrs to make, he has no hand skills.

EJayCe996 · 05-29-2011, 04:16 PM

Well RX-8 owners aren't the most handy unless they were previous RX-7 owners

***TitaniumTT*** · 05-29-2011, 10:24 PM

Quote:

Originally Posted by Mazdabater

If that actually took that guy 25hrs to make, he has no hand skills.

I think it's cool that the hitch comes through the ole rotor logo. It takes time, I still think that 25 hrs is a little excessive but shit always takes 2x as long as you think it will....

Quote:

Originally Posted by EJayCe996

Well RX-8 owners aren't the most handy unless they were previous RX-7 owners

***TitaniumTT*** · 05-29-2011, 10:38 PM

cooooooooool.............
http://www.ballisticfabrication.com/...II_p_1624.html

***TitaniumTT*** · 05-30-2011, 12:05 AM

So I happened upon Prodigy's sig........ I clicked it becuase I wasn't sure when I had said that..... albeit entirely true and I started reading posts from 9/2009.... I suck.... been talking about that fucking hitch and trailer and that retarded wiper switch and washers for over a year and a half.... thanks, thanks man... now I really feel like an ass and need to get on the ball.... I'm a slacker.....

j9fd3s · 05-30-2011, 04:55 PM

Quote:

Originally Posted by Mazdabater

If that actually took that guy 25hrs to make, he has no hand skills.

i wonder if his design time is included? it might have taken a while figure out HOW to do it

hades · 05-31-2011, 09:46 AM

more pics...

05-27-2011, 09:32 PM	#1246
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	That would be cutting you a deal biotch! I bill out at least $75/hr __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-27-2011, 11:59 PM	#1247
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land iTrader: (0) Posts: 316 Rep Power: 17	I thought you meant you needed to build a trailer for the jeep to pull the 7 with a rack for tires. Guess not.... __________________ This is going to tear

05-28-2011, 12:00 AM	#1248
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land iTrader: (0) Posts: 316 Rep Power: 17	oh - and what ever trailer you make should be able to go off road when GRASS!! appears. __________________ This is going to tear

05-28-2011, 10:37 AM	#1250
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land iTrader: (0) Posts: 316 Rep Power: 17	wow. 25 hours. sounds like one of my suppliers trying to pull a fast one. __________________ This is going to tear

05-28-2011, 10:38 AM	#1251
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land iTrader: (0) Posts: 316 Rep Power: 17	IMO a hitch wouldn't be bad if you could hide it for daily use. A custom bumper cover or plug? or make easy to remove? __________________ This is going to tear

05-28-2011, 08:24 PM	#1254
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS iTrader: (0) Posts: 326 Rep Power: 15	If that actually took that guy 25hrs to make, he has no hand skills.

05-29-2011, 04:16 PM	#1255
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX iTrader: (0) Posts: 283 Rep Power: 17	Well RX-8 owners aren't the most handy unless they were previous RX-7 owners __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology.

05-29-2011, 10:38 PM	#1257
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	cooooooooool............. http://www.ballisticfabrication.com/...II_p_1624.html __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-30-2011, 12:05 AM	#1258
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	So I happened upon Prodigy's sig........ I clicked it becuase I wasn't sure when I had said that..... albeit entirely true and I started reading posts from 9/2009.... I suck.... been talking about that fucking hitch and trailer and that retarded wiper switch and washers for over a year and a half.... thanks, thanks man... now I really feel like an ass and need to get on the ball.... I'm a slacker..... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-31-2011, 09:46 AM	#1260
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land iTrader: (0) Posts: 316 Rep Power: 17	more pics... __________________ This is going to tear

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode