|
Show your rotary car build up. Show off your Rotary Car build! |
|
Thread Tools | Display Modes |
05-04-2011, 09:08 PM | #1051 |
Test Whore - Admin
|
Probably should've let you drive it back to NVNC.... "GRASS!!!!!!!" Sorry 'bout that, thought I was ok.... you know you're tired when you start falling asleep and can't see straight while driving any of those rds. I did make Tray drive me back to the cabin though.... homie was hauling balls! He turned left, I hit my head on the glass, woke up, and saw 75mph on the speedo. Slouched down in the seat and went back to sleep.... got to the cabin and promptly passed out on the pool table becuase some bastard took my bed.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
05-04-2011, 09:10 PM | #1052 |
Test Whore - Admin
|
Oh yeah Hades... definately take you for a real ride real soon.... we picked up 80ft/lbs of torque on the dyno just by playing with the boost control down low.... she's now @ 250+ft/lbs by 3k! We bumped the redline to 8k becuase the torque carried for another 1000 rpms, literally. Peak torque is now something like 7.6/7.7k..... she's a fucking rocket. Must get back to dyno and finish playing.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
05-04-2011, 09:13 PM | #1053 | |
Test Whore - Admin
|
Quote:
I would LOVE to hit up some tracks with you guys this summer. THe auto-x's are nice, but I really want to stretch her legs a little. Lemme know, please, I'd really like to go with you guys. Don't short your FD man, she's a beaut! You should definately take pride in the fact that you did everything yourself, she's awesome for sure. Did you find that M84 thread I was telling you about?
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
|
05-04-2011, 09:14 PM | #1054 |
Rotary Fanatic
|
he is a 1/2 lying **** who was missing some parts, but was not as bad as he made it out to be.
He showed up very late on Saturday morning-3ish I think. Then he entered his car in the show I saw him around 9ish in the morning. His car was awesome (for an FC anyway ). I lost track of him until later on at the banquet. He was asked to help fix an FD back out on the dragon. On the way TTT became a little sleepy and decided that I should drive instead. So I grudgingly said ok. I really didn't want to drive a piece of shit FC with no torque and laggy turbos. On the way TTT got a little shut eye. We got to the FD about 1:00 in the morning. Goodfellas and some others beat us there and found out that one of the 2ndary injectors got stuck wide open. It managed to have fuel pouring out of every possible location. So the engine was deflooded. Both secondaries disconnected and we left around 1:50am. Then we drove back to the lodge where I took this pic. TTT was on the was to KDR to get his POS dyno'd on Monday. I texted me that it made a bit more torque
__________________
This is going to tear |
05-04-2011, 09:20 PM | #1055 |
Test Whore - Admin
|
Yup, that was the plan all along, I had a little ace in the hole JIC though and I actually did need him
For the last few weeks I've been pissing and moaning about not getting parts in time and have been leading people to believe that I wasn't taking the FC, when in fact, I knew I was going to.... 2gslse even said something to the effect of, you lied to us, you said you were going to the airport in the Jeep to pick your buddy up. That was actually the truth, I just said it in a way that would lead everyone to believe that we were leaving right after that.... so yeah, got you all!!!!! Then, Thursday morning she was outside idling away ready to go whe we realized that my e-fan had puked. I was like, screw this, we're going anyway, lets go get Colin and leave. But his ride wasn't done and he needed me to weld some stuff so we hung around and got his car rolling, I replaced the E-fan, rebled and adjusted the brakes, and we left on our 21hr journey Ironic thing is, if we HAD left, we would've been stuck in all that tornado traffic and I would've been screwed with no e-fan so I guess it was a good thing we left late? All I kow is I can't wait to go back. And yeah, now that the surprise is over with, I'll update the thread with all the pics I took of things that I did that I didn't tell anyone about
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
05-04-2011, 09:25 PM | #1056 | |
Rotary Fanatic
|
Quote:
I won't lie-I puckered and not from the speed . I am surprised you actually remember that "GRASS!!" In truth guys this thing is very built in all aspects. The engine is very torquey and the turbos are very very responsive. I left it in 3rd when I was driving. It had no problem pulling out of any turns (some tight and went up hill)--and we are taking about low rpms. I could have shifted down to 2nd. But it really didn't seem necessary. The only thing I would do it get a full manual rack instead of the depowered rack--but that's just me and its a very very small critique.
__________________
This is going to tear Last edited by hades; 05-04-2011 at 09:29 PM.. |
|
05-05-2011, 06:31 AM | #1057 | |
Rotary Fanatic
|
Quote:
I will be sure to let you know when I find out the next track event. I am hoping to get on track pretty soon as I have not been yet this year. I am proud of my car... it is just not quite where I would like it to be yet, but it is close. I have been doing quite a bit of reading on the topic of Motec ECU's since we spoke and I still have more to learn. I do plan on coming up with my necessary list of inputs/outputs this week, then I can go from there. I would also be interested in stopping by next time you head over to KDR to pick your brain about tuning a bit. Im not too far from Dave's shop.
__________________
|
|
05-05-2011, 08:51 AM | #1058 | ||
Rotary Fanatic
|
Quote:
Quote:
|
||
05-05-2011, 11:33 AM | #1059 |
Rawr Bearclaw
|
__________________
Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com |
05-05-2011, 11:35 AM | #1060 | |
Rawr Bearclaw
|
Quote:
__________________
Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com |
|
05-05-2011, 01:40 PM | #1061 |
Founder/Administrator/Internet Pitbull :)
|
Brian,
Did Jeremy/Puremdma/Proxyone (white FD) buy you dinner or anything for you for fixing his car??? If he doesn't offer to, he's ban for next year!! Phil
__________________
DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny |
05-05-2011, 03:43 PM | #1063 |
Rotary Fanatic
|
Brian, good to see you again when I get my FB's engine done we need to talk more.
What is your car putting down now with the BNR's ?
__________________
____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"... |
05-05-2011, 05:20 PM | #1064 | |
PPP-P-P-P-POWER!
|
Quote:
__________________
1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology. |
|