Writeup: JamesSpec Gauge Cluster

Rotary#10 · 01-29-2011, 08:28 PM

Mods can we sticky this ?

RETed · 01-29-2011, 08:47 PM

I don't think this warrants a sticky, but once the discussion dies down, I'm sure it'll get moved into the archives...

Also, it would help that you REALLY LIKE the thread, please give it a good rating.
"Rate Thread" at the top of the thread allows you to add stars.
This rating shows up in the thread list on each section.
Highly rated threads will warrant being saved, or in this case, moved to archives.

-Ted

Gregory Casimir · 02-01-2011, 10:37 PM

really nice but im not sure if i should do that to my S5 gauge cluster...........yet.

Sharingan 19 · 02-03-2011, 01:03 PM

There are some additional considerations when modding the s5 cluster. At the top of my list personally is that every s5 cluster I've seen had been pink and not orange, making it pretty difficult to match.

Also, the gauges in the s5 are apparently 45mm, but the gauges are a little bit larger so the holes would need to be enlarged if u wanted to mount them in the stock cluster. This presents a potential clearance issue w/the glass cover as even w/ the custom panel I made (which mounts behind the stock material) there are only a few mm of clearance between the gauge face and the clear cover.

01-29-2011, 08:28 PM	#16
Rotary#10 Rotorhead Join Date: Sep 2008 Location: "the town " Oakland iTrader: (1) Posts: 219 Rep Power: 17	Mods can we sticky this ? __________________ Currently running: 90 GTUs converted to S5 TurboII. Track car. 90 N/A GTUs.. Running project car 89 N/A GTUs in Black #2 10/6/18 Blown coolant seal undergoing rebuild and restomod.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2011, 10:37 PM	#18
Gregory Casimir Rotary Fanatic Join Date: Jan 2010 iTrader: (0) Posts: 253 Rep Power: 15	really nice but im not sure if i should do that to my S5 gauge cluster...........yet.

02-03-2011, 01:03 PM	#19
Sharingan 19 Rotary Fanatic Join Date: May 2010 iTrader: (0) Posts: 138 Rep Power: 15	There are some additional considerations when modding the s5 cluster. At the top of my list personally is that every s5 cluster I've seen had been pink and not orange, making it pretty difficult to match. Also, the gauges in the s5 are apparently 45mm, but the gauges are a little bit larger so the holes would need to be enlarged if u wanted to mount them in the stock cluster. This presents a potential clearance issue w/the glass cover as even w/ the custom panel I made (which mounts behind the stock material) there are only a few mm of clearance between the gauge face and the clear cover.