Drifting, hellaflush, slammed, tire stretch blog/bash thread.

[sofaking]

I don't feel the need to address a whole bunch of questions directed at a point I wasn't trying to make. I'll answer some though, I find that 1/2 of them are phrased in a sarcastic or rediculous nature because they're asking about things that were clarified in the topic already. The point wasn't if you could give me a million tests and contribute the rest of your life to the concern about tire safety. I was merely stating without said information which niether of us have, we can't determine a whole lot.

As for gauging proper inflation I concede, I don't know how to determine what it should be set at without feeling it out. I addressed that I fill them to 40psi, but I'm not sure what you want there. If you have an answer do share, if not... the question doesn't appear to have a point but to discredit my scientific process for determining proper tire inflation levels which I'm sure would also require math to determine anything specific.

I will offer a link to a tire that de-beaded for no apparent reason (or possibly someone deflated it). The thing is nothing can be proven in that field either without knowing 100% what all the variables are. I have personally had it happen for seemingly no reason... obviously there is a reason, but I don't know it so it's unexplained.
http://answers.yahoo.com/question/in...4221537AA4wUoh
Someone previously in this same topic even mentioned they've seen properly mounted tires debead if I remember correctly.

I did state that I believe you're arguing theory, I don't retract that. But I will happily clarify what I'm refering to. It's not the science you're quoting that I am calling theory. I'm arguing that the conclusion you've come to about the safety is your theory, your opinion, your conclusion. I made a graph to illustrate my point. I never said that your information on tire deformation was wrong or theory. I argued your conclusion of safety concern is jumping to a conclusion from the science and that's the part I wanted proven. Obviously when you change the shape of a material that was designed for a certain shape it will stress or break it. That's common knowledge.


To state where on this graph you should plot a point of stretched sidewall failure would be only theory, speculation, guessing, whatever you care to call it without a pile of math that niether of us want to do, and only one of us knows the formulas (hint: not me).

As for your diagram...

Is this what you want? teach away.

[vex]

Originally Posted by mazpower

You are very mistaken Vex. Dave (GuitarJunkie28) died because he lost control driving down a mountain road that he had driven since his teens and knew very well. It was a 4 lane road with no divider between opposing lanes. Those who knew him knew that he was not a reckless person, it was just a tragic accident. Interestingly enough, one of his tires was flat and very well could have been from a nail stuck in the road, but CHP did not go with this theory, instead stating that he just lost control around a curve. I find this hard to believe considering he knew the road, he knew his car, he wasn't a careless speed demon, and it wasn't wet or icy out.

The young woman that he hit made a full recovery and she was the only person in her car. I remember seeing her family at Dave's funeral. Fine people for sure.

Anyways just wanted to clear that up.

I don't want to be misunderstood, I was under the impression someone else hit him. Thank you for setting the record straight.

[vex]

Originally Posted by sofaking

I don't feel the need to address a whole bunch of questions directed at a point I wasn't trying to make. I'll answer some though, I find that 1/2 of them are phrased in a sarcastic or rediculous nature because they're asking about things that were clarified in the topic already. The point wasn't if you could give me a million tests and contribute the rest of your life to the concern about tire safety. I was merely stating without said information which niether of us have, we can't determine a whole lot.

I haven't seen 'em answered but if you have a post number to refer me to I'll gladly re-read them.

As for gauging proper inflation I concede, I don't know how to determine what it should be set at without feeling it out. I addressed that I fill them to 40psi, but I'm not sure what you want there. If you have an answer do share, if not... the question doesn't appear to have a point but to discredit my scientific process for determining proper tire inflation levels which I'm sure would also require math to determine anything specific.

Unfortunately what you describe isn't scientific. Tensile side wall strength is compromised with stretch.

I will offer a link to a tire that de-beaded for no apparent reason (or possibly someone deflated it). The thing is nothing can be proven in that field either without knowing 100% what all the variables are. I have personally had it happen for seemingly no reason... obviously there is a reason, but I don't know it so it's unexplained.
http://answers.yahoo.com/question/in...4221537AA4wUoh
Someone previously in this same topic even mentioned they've seen properly mounted tires debead if I remember correctly.

During normal driving conditions?

I did state that I believe you're arguing theory, I don't retract that. But I will happily clarify what I'm refering to. It's not the science you're quoting that I am calling theory. I'm arguing that the conclusion you've come to about the safety is your theory, your opinion, your conclusion. I made a graph to illustrate my point. I never said that your information on tire deformation was wrong or theory. I argued your conclusion of safety concern is jumping to a conclusion from the science and that's the part I wanted proven. Obviously when you change the shape of a material that was designed for a certain shape it will stress or break it. That's common knowledge.

Lets link two ideas here. Since you do not know how much air would be required to fill tire properly you do not know how the tire will be stressed. Underinflation will result in the previously posted picture. Overinflation will result in a blow out during normal operation. Couple that with the alteration in the geometry you now have points of stress along the tread and shoulder. The issue of a stretched tire can then be split to different points:

1. Failure due to underinflation or overinflation
2. Failure due to sidewall failure
3. Failure due to tread separation

Tensile strength of the sidewall affects the first two points. Since we're altering the geometry of the tire when it's stretched we can know by your own admission that:

Obviously when you change the shape of a material that was designed for a certain shape it will stress or break it

Thereby removing factors of safety.

To state where on this graph you should plot a point of stretched sidewall failure would be only theory, speculation, guessing, whatever you care to call it without a pile of math that niether of us want to do, and only one of us knows the formulas (hint: not me).

And I'm attempting to get you to understand the math so I'm not wasting my time. Additionally what tire would are you desiring?

As for your diagram...

Is this what you want? teach away.

Your forces are off. Displaced air is not needed and can be removed (unless we have lighter molecules than air). You're also missing a normal force (acts perpendicular to the tire) that keeps the tire from pushing through the ground.

[TitaniumTT]

That is all

[speedjunkie]

I must say I LOATHE remixes, like when they say the same thing over and over again. I also hate when DJs mix a song on the radio, JUST LET ME HEAR THE FREAKIN SONG! lol

Therefore, I hate that video Brian. lol

[sofaking]

Originally Posted by vex

I haven't seen 'em answered but if you have a post number to refer me to I'll gladly re-read them.

I don't feel like going back and quoting, but everytime you asked for information about what I would like it was completely sarcastic and ended with you telling me that you didn't want to do the math. I got as specific as I was looking for and told you that you could use constants for variables if it made it easier. Your response was that you didn't want to waste your time. So quoting myself getting told that you aren't going to do it doesn't help. Move on to the physics lesson if you'd like to make a point, it's the closest thing to figuring anything out we've gotten to.

Originally Posted by vex

Unfortunately what you describe isn't scientific. Tensile side wall strength is compromised with stretch.

I already said that was your point... so if you're not adding anything what is the point in saying it again?

Originally Posted by vex

Thereby removing factors of safety.

So you're saying that there is no possibility that the tire can sustain this, or you're just saying that you know a lot of factors determine the safety of a tire and without the math you can't do anything but speculate what may or may not happen?

Lets define for the sake of discussion that safety is the tire not failing (in any way) before the tread is used up during normal driving conditions. I understand it doesn't meet the original specifications, but the only information we know as of yet is that it will fail to the left side of my graph. Whether it gets even close to the green area is complete speculation.

Originally Posted by vex

Additionally what tire would are you desiring?

I'm using a Falken Azenis RT615k 215/40-17 on a 17x9.5 wheel.

Originally Posted by vex

Your forces are off. Displaced air is not needed and can be removed (unless we have lighter molecules than air). You're also missing a normal force (acts perpendicular to the tire) that keeps the tire from pushing through the ground.

This was the point I was making about drawing the diagram and getting to the point. Going back and forth to prove you know where you're going with your point is a waste of both of our time.

[EJayCe996]

Originally Posted by TitaniumTT

That is all

oh yes, we hooked a smartphone up to someone's car audio back in Cali and blasted this when we pulled up next to Glenn on the street

[sofaking]

For the sake of moving this along...

[djmtsu]

This is so retarded. I love it.

As soon as some mad tyte Affliction 4 Loco retard in a 240 with stretched tires crashes into me, I will have my lawyer/insurance absolutely destroy them based on the fact that the tires are incorrectly sized.

Then, this conversation will be over.

[mazpower]

Originally Posted by EJayCe996

oh yes, we hooked a smartphone up to someone's car audio back in Cali and blasted this when we pulled up next to Glenn on the street

Still not as bad as hearing my own balls slap and watching it on a big screen in a Vegas casino bar the night before my wedding. The people's reaction was classic once they figured out what the noise was.

[TitaniumTT]

As long as they didn't realize who it actually was, everything should be ok Should've had you lay some sack on my bumper while I was out there. Could've had Ty make a video called ball slapping turbo shooting sugargliders with RX7 turbo's and pissed off neighbors and recorded him doing the donuts in front of Kevins house and my block long burnout the time before the time I actually left

I miss Cali, should've just left my car out there

[mazpower]

Yeah dude, if we did that, your evil car would have probably cooperated.

You should have left it in Cali. You can always come back, I got 1500 square feet of workspace now. Also gonna be getting a used synchrowave, damn thing is water cooled, 100% duty cycle. Like Robert's mangina.

[vex]

I can't tell from how you drew the friction, does it have a direction? If it has a direction you need to apply either a torque or a force to the tire to dictate the impulse of motion (or the force enough to cancel out the 'amount' of friction acting on the tire to keep it from moving). If the tire is static (which would be easier) you have drawn the FBD correctly.

[vex]

Sorry didn't see this until just now.

Originally Posted by sofaking

I don't feel like going back and quoting, but everytime you asked for information about what I would like it was completely sarcastic and ended with you telling me that you didn't want to do the math. I got as specific as I was looking for and told you that you could use constants for variables if it made it easier.

Using variables in this sort of math will cause you to get a bunch of variables in equations that do not make much sense. We'll use constants sure enough, but leaving variables into the equations of question is going to be worse than just using real values.

Your response was that you didn't want to waste your time. So quoting myself getting told that you aren't going to do it doesn't help. Move on to the physics lesson if you'd like to make a point, it's the closest thing to figuring anything out we've gotten to.

This isn't physics in the true sense of the word (at least not from when I took those classes). This is basic material science.

I already said that was your point... so if you're not adding anything what is the point in saying it again?

It seemed to me that you were attempting to sustain this as scientific procedure. If you're no longer sustaining that or if I misinterpreted that from your post then by all means the point is moot now.

So you're saying that there is no possibility that the tire can sustain this, or you're just saying that you know a lot of factors determine the safety of a tire and without the math you can't do anything but speculate what may or may not happen?

This may better help you understand: Factor of Safety. A reduction in the FOS reduces the ability for the tire to handle the same stresses as a properly mounted tire would otherwise be able to endure.

Lets define for the sake of discussion that safety is the tire not failing (in any way) before the tread is used up during normal driving conditions. I understand it doesn't meet the original specifications, but the only information we know as of yet is that it will fail to the left side of my graph. Whether it gets even close to the green area is complete speculation.

I think this is a failure to communicate what FOS is.

I'm using a Falken Azenis RT615k 215/40-17 on a 17x9.5 wheel.
This was the point I was making about drawing the diagram and getting to the point. Going back and forth to prove you know where you're going with your point is a waste of both of our time.

Again, I think you miss the point. Discussing the science isn't for my benefit but yours. If you do not understand where the number comes from at the end of the day all it's going to be to you is a number--But if you understand where that number came from at the end of the day you will know and understand what the material is doing when you stretch the tire and place it under load.

[sofaking]

Since I clearly don't understand how to apply a torque to offer a direction because I thought it could be used as a force I wouldn't know how to add it. For the sake of this analysis lets say the tire is static.

I read the FoS link, interesting stuff. To my knowledge (making an assumption without taking hours of classes on the subject)... Passenger tires would have an MoS of +3 or +4 if the sidewall lasts 3-4 times longer than the predicted load, correct? Not to mention that any given tire usually isn't at its maximum load when installed on a passenger vehicle anyway (Which is what the FoS is engineered to. I.E. max inflation pressure/weight), correct?

Also the article covered a sentence on my point as well...

Many systems are purposefully built much stronger than needed for normal usage to allow for emergency situations, unexpected loads, misuse, or degradation.

This would lead me to believe that it is possible I am right. I'm not saying that it is or isn't "safe". I'm saying that it's possible that it is safe, correct? If it is possible that it is safe, then the obvious conclusion would be that it would not be a fact to call it "unsafe", correct?