Is this fixable?

rx7 FC TII · 10-19-2010, 01:03 PM

yeah man it sounds like you got a pretty good plan. id get it as long as there isnt any unforseen damage that is major. finding those parts might be difficult in the silver but if you get the paint code it shouldnt be a problem.

jerd_hambone · 10-19-2010, 01:11 PM

According to the guy, the car was garage kept for a long time and the paint is in excelent shape. If I can't get the parts in Winning Silver, I'll paint the whole car. It's hard to get good matching paint for FC's.

JustJeff · 10-19-2010, 01:37 PM

Aside from the obvious, I'm betting only the bottom bumper support frame is bent. My vert took a similar hit from a pothole at an apt complex. Hit it hard, bottomed out the car, snapped my front lip and bent a support that the bumper attaches to.

To finish out my coolstorybro.com, I called the city to try and get them to pay for my damages and they said it was private property. I called the complex manager she said that they were not liable because they did not have enough time since the hole formed to either mark it or fix it. I didn't file a claim with my insurance cause my deductible was more than the damage.

jerd_hambone · 10-19-2010, 01:48 PM

As long as it's just the supports, I can deal with that. If it went deeper, I'm may just get it and part it out.

jerd_hambone · 10-19-2010, 04:06 PM

I just talked to the guy, he seems like a nice guy. But I found out the car is quite a bit further out than I thought at first. It's in Louisville, and I live on the border on Tn. So about a 5 hour round trip, add that up for two cars, or twice. Hm.

He said the damage doesn't mess with the car running and driving, he's even taken it on a few strolls.

He said the driver side is where the damage is, and it bent the bumper brackets, popped the hood up, bowed out the fender, put a crinkle in the passenger fender, and broke the drive side headlight mechanics.

Can't come down on the price though. Hmm.

firzen · 10-19-2010, 07:21 PM

If the damage is too much, why not turn it into a crapcan racing machine?

***TitaniumTT*** · 10-19-2010, 07:52 PM

expect to buy alot of new factory sheet metal, a bunch of spot weld cutters, and do alot of welding. But shit man, you just went to school for collision repair right? Should be a piece of cake, no?

jerd_hambone · 10-19-2010, 08:21 PM

Quote:

Originally Posted by firzen

If the damage is too much, why not turn it into a crapcan racing machine?

Too much hassle, not enough benefits.

Quote:

Originally Posted by TitaniumTT

expect to buy alot of new factory sheet metal, a bunch of spot weld cutters, and do alot of welding. But shit man, you just went to school for collision repair right? Should be a piece of cake, no?

Sadly I have zero equipment to do such work, and I'm not paying to have it done haha. Luckily I have a driver fender, hood, and headlight assembly.

I'm just terrified of what I'll find when the front end is off.

I'll driving to Louisville and back multiple times for this car if I get it. Thats around 400 miles per round trip. I want it to be worth it.

project86 · 10-19-2010, 08:31 PM

have the guy raise the hood and take pics of the rad support and ish. how much did you say he wanted for it?

its not that hard to match the paint on these things

ive done it! id fix it if the price is right. and it sounds like you have half the parts you need. plus.. you have been without for tooooo long.

jerd_hambone · 10-19-2010, 08:38 PM

He's just asking $600. And honestly, that isn't that bad. Not the cheapest FC I've bought, but definitely nowhere near the most expensive.

But with the painting, I'm a perfectionist, so any dent, ding, scratch, or rot will be fixed. Soo I'll spray the whole car.

project86 · 10-19-2010, 09:08 PM

Quote:

Originally Posted by jerd_hambone

But with the painting, I'm a perfectionist, so any dent, ding, scratch, or rot will be fixed. Soo I'll spray the whole car.

man i knew there was a reason i liked you

. im the same. buy it. just do it

jerd_hambone · 10-19-2010, 09:10 PM

I probably will. If all goes well, I'll be checking it out this weekend.

And you like me because of my pretty hair hahaha

project86 · 10-19-2010, 09:11 PM

wait.. it does run right?

project86 · 10-19-2010, 09:11 PM

Quote:

Originally Posted by jerd_hambone

I probably will. If all goes well, I'll be checking it out this weekend.

And you like me because of my pretty hair hahaha

haha damn! youre right! its is the hair!

jerd_hambone · 10-19-2010, 09:21 PM

Yeah, car runs and drives. Guy said alternator needs changed, and he'll do that.

10-19-2010, 07:52 PM	#22
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	expect to buy alot of new factory sheet metal, a bunch of spot weld cutters, and do alot of welding. But shit man, you just went to school for collision repair right? Should be a piece of cake, no? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

10-19-2010, 08:31 PM	#24
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	have the guy raise the hood and take pics of the rad support and ish. how much did you say he wanted for it? its not that hard to match the paint on these things ive done it! id fix it if the price is right. and it sounds like you have half the parts you need. plus.. you have been without for tooooo long. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-19-2010, 09:11 PM	#28
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	wait.. it does run right? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-19-2010, 01:37 PM	#18
JustJeff RCC Contributor Join Date: Mar 2008 iTrader: (1) Posts: 505 Rep Power: 17	Aside from the obvious, I'm betting only the bottom bumper support frame is bent. My vert took a similar hit from a pothole at an apt complex. Hit it hard, bottomed out the car, snapped my front lip and bent a support that the bumper attaches to. To finish out my coolstorybro.com, I called the city to try and get them to pay for my damages and they said it was private property. I called the complex manager she said that they were not liable because they did not have enough time since the hole formed to either mark it or fix it. I didn't file a claim with my insurance cause my deductible was more than the damage.

10-19-2010, 07:21 PM	#21
firzen Rotary Fanatic Join Date: Mar 2008 iTrader: (2) Posts: 231 Rep Power: 17	If the damage is too much, why not turn it into a crapcan racing machine?