Carbing 20Bs?

project86 · 07-01-2010, 01:01 AM

Anyone using a carb on their 20B set up? Im just kinda curious.

sen2two · 07-01-2010, 09:17 AM

Many people have.

I don't remember who makes it. But someone makes a distributor, so you can carb the 20b. I was thinking it was Atkins or Racing Beat, but i'm not to sure anymore.

There's also a few 3 carb webers floating around on eBay that were intended for porches and a few other cars that could be nice if modified a bit.

project86 · 07-01-2010, 11:45 AM

im kinda toying with the idea cause i have friend here who is good with carbs and i think that would be just as practical if not more than spending 6 or 7K on a MoTeC. But i dunno. just an idea im having

***Herblenny*** · 07-01-2010, 03:48 PM

Racing beat made some distributors.

I'm hoping to build an NA 20B carb in next year or two. Engine will be built hopefully within next few months.

project86 · 07-01-2010, 09:50 PM

Quote:

Originally Posted by Herblenny

Racing beat made some distributors.

I'm hoping to build an NA 20B carb in next year or two. Engine will be built hopefully within next few months.

Thats my goal is reliable NA power. I have just been thinking alot about it and i really dont think i want the headache of the standalone EMS. A carb would keep it simple.

Rotary Inspired · 07-01-2010, 09:57 PM

I have a buddy who had porsche throttal bodies made to fit his 20B. Its a pretty cool set up.

project86 · 07-01-2010, 09:58 PM

^^ That sounds cool.

Force13b · 07-02-2010, 02:26 PM

ITB's

sen2two · 07-02-2010, 04:25 PM

ITB = Individual Throttle Bodies

Throttle body refering to fuel injection. Not carburetors.

Force13b · 07-02-2010, 05:27 PM

Quote:

Originally Posted by sen2two

ITB = Individual Throttle Bodies

Throttle body refering to fuel injection. Not carburetors.

Thank you so much since i had no idea what i was typing.

***Herblenny*** · 07-02-2010, 08:58 PM

Quote:

Originally Posted by project86

Thats my goal is reliable NA power. I have just been thinking alot about it and i really dont think i want the headache of the standalone EMS. A carb would keep it simple.

I'll be honest with you.. i know jack sh*t about carb.

My engine builder is an expert on this and hence I'm wanting to give it a shot.

But EFI is better way to go in many ways also.

project86 · 07-02-2010, 10:10 PM

Quote:

Originally Posted by Herblenny

I'll be honest with you.. i know jack sh*t about carb.

My engine builder is an expert on this and hence I'm wanting to give it a shot.

But EFI is better way to go in many ways also.

I also have a friend here who is experienced in carbs which is why ive been considering it. I also dont know anything about them. I know EFI is a good way to go aswell but right now i just really dont like the idea of spending 5k+ on an EMS. I dont know how to tune.. .although im willing to learn... i dunnno... decisions decisions...

sen2two · 07-02-2010, 10:41 PM

well a Microtech will run a 20b just fine, and will only run you around $1500. I am a huge fan of webers though. Carb'ed engine bays are so much cleaner. The main thing is to find out if Racing Beat still makes/sells the 20b dizzy.

There's no need for a discussion of whats better. Because the answer of that changes depending on who your talking to.

project86 · 07-03-2010, 06:00 AM

i always hear that carbs are just as good and that i should be able to squeeze just as much power of on as EFI....

RotaryProphet · 07-03-2010, 08:20 AM

You can squeeze as much peak power out with careful tuning, of course. But EFI will always lead to a fatter power band, and huge drive-ability gains.

07-01-2010, 01:01 AM	#1
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	Carbing 20Bs? Anyone using a carb on their 20B set up? Im just kinda curious. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

07-01-2010, 09:17 AM	#2
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	Many people have. I don't remember who makes it. But someone makes a distributor, so you can carb the 20b. I was thinking it was Atkins or Racing Beat, but i'm not to sure anymore. There's also a few 3 carb webers floating around on eBay that were intended for porches and a few other cars that could be nice if modified a bit. __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

07-01-2010, 11:45 AM	#3
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	im kinda toying with the idea cause i have friend here who is good with carbs and i think that would be just as practical if not more than spending 6 or 7K on a MoTeC. But i dunno. just an idea im having __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

07-01-2010, 03:48 PM	#4
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Racing beat made some distributors. I'm hoping to build an NA 20B carb in next year or two. Engine will be built hopefully within next few months. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

07-01-2010, 09:57 PM	#6
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC iTrader: (0) Posts: 75 Rep Power: 17	I have a buddy who had porsche throttal bodies made to fit his 20B. Its a pretty cool set up. __________________ If you wanna become ASE certified buy the RX7.

07-01-2010, 09:58 PM	#7
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	^^ That sounds cool. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

07-02-2010, 02:26 PM	#8
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 iTrader: (1) Posts: 315 Rep Power: 16	ITB's

07-02-2010, 04:25 PM	#9
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	ITB = Individual Throttle Bodies Throttle body refering to fuel injection. Not carburetors. __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

07-02-2010, 10:41 PM	#13
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	well a Microtech will run a 20b just fine, and will only run you around $1500. I am a huge fan of webers though. Carb'ed engine bays are so much cleaner. The main thing is to find out if Racing Beat still makes/sells the 20b dizzy. There's no need for a discussion of whats better. Because the answer of that changes depending on who your talking to. __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

07-03-2010, 06:00 AM	#14
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	i always hear that carbs are just as good and that i should be able to squeeze just as much power of on as EFI.... __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

07-03-2010, 08:20 AM	#15
RotaryProphet Rotary Fanatic Join Date: Sep 2008 iTrader: (0) Posts: 147 Rep Power: 17	You can squeeze as much peak power out with careful tuning, of course. But EFI will always lead to a fatter power band, and huge drive-ability gains.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode