FujiRacing 13B Rotary Miata Build - Page 3

FujiRacing · 03-08-2010, 05:28 PM

ziig get those pics on here, I like to see your build.

We will be coming out with Semi-PP Intake manifolds.

REDLINE TIME ATTACK Sebring Florida August 14th-15th we hope to be ready by then.

FujiRacing · 03-19-2010, 06:21 AM

Our KAAZ LSD in on it's way.

We will be using our own FujiRacing 50mm ITB's and Fuel Rail.

Roen · 03-19-2010, 08:53 AM

Not to threadjack, but it seems like the FD would be a great fit in the street tire class.

A GTUs would be a nice fit in the Enthusiast class as it seems to only restrict forced induction upgrades. You can make the argument that porting is like a camshaft, so you'd run the largest port that still lets you pass emissions.

(Or you just run your car on E85 and drive a bridgeport / p-port to totally annihilate the competition, that should still pass emissions, right?)

I just realized, Corvette's will probably own in the Enthusiast class.

Roen · 03-19-2010, 09:03 AM

Ever thought about getting these for the Miata build?

http://www.racingbeat.com/resultset....rtNumber=11061

Which block are you guys using? There have been good results using the RE block in NA form with either 9.7:1 S5 NA rotors or some special 10.2:1 Rotors that KDRotary had used in an NA 20B build. Methinks they were just 10:1 rotors though.

FujiRacing · 03-31-2010, 03:14 PM

Our FujiRacing 50mm ITB Throttle Bodies just came in from Japan. It has 2 Injector ports per Throttle. I will post pics the next couple of days.

WE3RX7 · 04-01-2010, 07:08 AM

Patiently waiting for pics... I potentially have a rotary powered endurance mx5 project in my future

ziig · 04-06-2010, 02:33 PM

look at the thread for rotary of the month my miata is on there. I ran 9.7 :1 rotors with the turbo, damaged a rear stationary bearing so i swapped out bearing and decided to drop compression a bit now makeing 310 @ 5 psi

AK1RA07 · 04-19-2010, 11:19 AM

As an owner of a Miata with a blown engine and and ugly FD with a good engine, this is intriguing to me.. cant wait for more info on this kit.

FujiRacing · 04-20-2010, 03:28 PM

Moving along just fine. Car will be ready sometime this year I can promise you that.

FujiRacing · 05-19-2010, 08:09 AM

Pulled my Mazda Torsen Diff. and the alum. housing was cracked. What's amazing is we were able to set the fastest time (over 85 Miata's) @ Hallet Raceway 1.8 mile circuit on 100 treadwear tires 1:28.2 with our 184 whp N/A ITB Piston motor beating the old time of a Supercharged 260 whp time of 1:28.3. Driver only had 1 session and put down the time with the cracked housing which does affect acceleration and possibly handling. I have a pretty good idea what the piston motor can do and can only imagine what the 13B will do.

Note: Last week testing the 1st gen RX712A Semi-PP in the 1/8th and the R&P Gear broke. We will try again this week.
Semi-PP is not new to us.

alexl · 06-06-2010, 08:33 PM

In for updates

FujiRacing · 06-08-2010, 11:34 AM

Received my Apex Seals from Japan. I need to get the Iron plates and waiting on the XRP fittings for the fuel rail.

cencalballer · 06-27-2010, 05:34 PM

Very cool and excited to see this finished. i would love to have a miata but i hate the 4 banger in them.

djmtsu · 10-22-2010, 09:14 PM

Updates.

Looking into a future Miata/rotary project and would like to see some real information about the swap. Not just bits an pieces of info.

Thanks Fuji!

dj55b · 11-05-2010, 12:01 AM

Anyone know where Jimmy (owner of Fuji Racing) Has been?

03-08-2010, 05:28 PM	#31
FujiRacing Rotary Fan in Training Join Date: Dec 2009 Posts: 90 Rep Power: 16	ziig get those pics on here, I like to see your build. We will be coming out with Semi-PP Intake manifolds. REDLINE TIME ATTACK Sebring Florida August 14th-15th we hope to be ready by then. __________________ Jimmy FujiRacing www.fuji-racing.com *2010 13B Rotary Miata Semi-PP* 2009 REDLINE TIME ATTACK Modified Class Winner Nashville & Englishtown NJ.(Miata Piston Motor n/a) 2008 REDLINE TIME ATTACK Overall Winner VIR Street Class (Miata Piston Motor n/a) 1990 FC3S Street Car

03-19-2010, 06:21 AM	#32
FujiRacing Rotary Fan in Training Join Date: Dec 2009 Posts: 90 Rep Power: 16	Our KAAZ LSD in on it's way. We will be using our own FujiRacing 50mm ITB's and Fuel Rail. __________________ Jimmy FujiRacing www.fuji-racing.com *2010 13B Rotary Miata Semi-PP* 2009 REDLINE TIME ATTACK Modified Class Winner Nashville & Englishtown NJ.(Miata Piston Motor n/a) 2008 REDLINE TIME ATTACK Overall Winner VIR Street Class (Miata Piston Motor n/a) 1990 FC3S Street Car

03-19-2010, 08:53 AM	#33
Roen Evil Club Mod Join Date: Feb 2008 Posts: 183 Rep Power: 18	Not to threadjack, but it seems like the FD would be a great fit in the street tire class. A GTUs would be a nice fit in the Enthusiast class as it seems to only restrict forced induction upgrades. You can make the argument that porting is like a camshaft, so you'd run the largest port that still lets you pass emissions. (Or you just run your car on E85 and drive a bridgeport / p-port to totally annihilate the competition, that should still pass emissions, right?) I just realized, Corvette's will probably own in the Enthusiast class. __________________ Ex-King of the Loop / Captain Guardrail / Master Crab Rapist / Evil Crop Dusting Mod Last edited by Roen; 03-19-2010 at 09:15 AM.

03-19-2010, 09:03 AM	#34
Roen Evil Club Mod Join Date: Feb 2008 Posts: 183 Rep Power: 18	Ever thought about getting these for the Miata build? http://www.racingbeat.com/resultset....rtNumber=11061 Which block are you guys using? There have been good results using the RE block in NA form with either 9.7:1 S5 NA rotors or some special 10.2:1 Rotors that KDRotary had used in an NA 20B build. Methinks they were just 10:1 rotors though. __________________ Ex-King of the Loop / Captain Guardrail / Master Crab Rapist / Evil Crop Dusting Mod

03-31-2010, 03:14 PM	#35
FujiRacing Rotary Fan in Training Join Date: Dec 2009 Posts: 90 Rep Power: 16	Our FujiRacing 50mm ITB Throttle Bodies just came in from Japan. It has 2 Injector ports per Throttle. I will post pics the next couple of days. __________________ Jimmy FujiRacing www.fuji-racing.com *2010 13B Rotary Miata Semi-PP* 2009 REDLINE TIME ATTACK Modified Class Winner Nashville & Englishtown NJ.(Miata Piston Motor n/a) 2008 REDLINE TIME ATTACK Overall Winner VIR Street Class (Miata Piston Motor n/a) 1990 FC3S Street Car

04-01-2010, 07:08 AM	#36
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Patiently waiting for pics... I potentially have a rotary powered endurance mx5 project in my future

04-06-2010, 02:33 PM	#37
ziig The Newbie Join Date: Feb 2010 Location: ohio Posts: 16 Rep Power: 0	look at the thread for rotary of the month my miata is on there. I ran 9.7 :1 rotors with the turbo, damaged a rear stationary bearing so i swapped out bearing and decided to drop compression a bit now makeing 310 @ 5 psi

04-19-2010, 11:19 AM	#38
AK1RA07 The Newbie Join Date: Apr 2010 Posts: 1 Rep Power: 0	As an owner of a Miata with a blown engine and and ugly FD with a good engine, this is intriguing to me.. cant wait for more info on this kit.

04-20-2010, 03:28 PM	#39
FujiRacing Rotary Fan in Training Join Date: Dec 2009 Posts: 90 Rep Power: 16	Moving along just fine. Car will be ready sometime this year I can promise you that. __________________ Jimmy FujiRacing www.fuji-racing.com *2010 13B Rotary Miata Semi-PP* 2009 REDLINE TIME ATTACK Modified Class Winner Nashville & Englishtown NJ.(Miata Piston Motor n/a) 2008 REDLINE TIME ATTACK Overall Winner VIR Street Class (Miata Piston Motor n/a) 1990 FC3S Street Car

06-06-2010, 08:33 PM	#41
alexl The Newbie Join Date: Jan 2010 Posts: 2 Rep Power: 0	In for updates

06-08-2010, 11:34 AM	#42
FujiRacing Rotary Fan in Training Join Date: Dec 2009 Posts: 90 Rep Power: 16	Received my Apex Seals from Japan. I need to get the Iron plates and waiting on the XRP fittings for the fuel rail. __________________ Jimmy FujiRacing www.fuji-racing.com *2010 13B Rotary Miata Semi-PP* 2009 REDLINE TIME ATTACK Modified Class Winner Nashville & Englishtown NJ.(Miata Piston Motor n/a) 2008 REDLINE TIME ATTACK Overall Winner VIR Street Class (Miata Piston Motor n/a) 1990 FC3S Street Car

06-27-2010, 05:34 PM	#43
cencalballer The Newbie Join Date: Jun 2010 Location: cen cal Posts: 1 Rep Power: 0	Very cool and excited to see this finished. i would love to have a miata but i hate the 4 banger in them. __________________ datsun 1200-250 whp 1600 lbs 2 rotors bmw 528i- been to the moon on the way home now

10-22-2010, 09:14 PM	#44
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Updates. Looking into a future Miata/rotary project and would like to see some real information about the swap. Not just bits an pieces of info. Thanks Fuji! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

11-05-2010, 12:01 AM	#45
dj55b The Newbie Join Date: Nov 2010 Posts: 7 Rep Power: 0	Anyone know where Jimmy (owner of Fuji Racing) Has been?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode