|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
Thread Tools | Display Modes |
03-01-2010, 04:16 PM | #1 |
Sigh.....
|
Tokico Blues + ???? = Score
I currently have Tokico Blues on the car with stock springs. As I have a couple bucks now I'm looking to upgrade the springs. I've heard good things about Tanabe GF-210, Tein S-Tech, Eibach Pro Kit, and Racing Beat but I'm not sure which would suit the Blues well. Suggestions?
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." |
03-01-2010, 05:08 PM | #2 |
Out of Nickels and Dimes
|
I think most of what you're going to find is too stiff for use as a daily driver. I have Blues and Eibach Pro-kit springs on my car. I picked the Pro-kit springs because they are progressive and I thought they would go a little easier on me for daily driving but even the Pro-kits feel a bit stiff. (I'm spoiled I think)
I've heard others say to steer away from Eibachs and go with Tein because the stiffer springs handle better but I don't just drive on the track and I don't want to hate driving my car because it makes me need a chiropractor. Anyhow... if you want to know what the Eibachs + Tokico blues feel like, just take mine for a spin next time we have a meet.
__________________
1988 GXL |
03-01-2010, 05:51 PM | #3 |
Sigh.....
|
It's not a daily but I think I've been a bit spoiled by my 6 and its comforts. I'd like something that will be pretty comfortable and make for an enjoyable leisure drive along with aggressive responsiveness if wanted. Perhaps something middle of the road.
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." |
03-01-2010, 11:06 PM | #4 |
Pirate
|
i think you are all spoiled, and dont have a clue what stiff FC suspnsion feels like. Go get some coilovers, then put the blues/whatever back on and the car will feel like a S600 benz.
Honestly, I havent tried any of the springs, but I cant imagine they would be anywhere near coilover stiffness level. Also, any new shock/spring combo will feel words better in comparison to 20y.o. suspension, so just stop being a puss and go for it!
__________________
Rotaries:They are NOT that complicated! |
03-01-2010, 11:51 PM | #6 | |
Test Whore - Admin
|
Quote:
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
|
03-02-2010, 12:36 AM | #7 | |
Sigh.....
|
Quote:
I haven't felt a "stiff FC suspension", nor do I want to. I enjoy having some comfort when driving my car as I don't track it and don't Auto-X. What the hell is the point of super stiff coilovers given that?
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." |
|
03-02-2010, 09:00 AM | #8 | |
rotors excite me
|
If you don't track it, AutoX, or want any kind of increase in handling performance then I don't see why you'd buy anything but OEM unless OEM was much more expensive. They came from the factory with pretty good cornering ability.
__________________
He isn't a killer. He just wins -- thoroughly. '87 TII 240+ rwhp on my DIY streetport, ~13psi on stock turbo, Racing Beat REVTII exhaust rTek 2.1 awaits a tune Quote:
|
|
03-02-2010, 09:18 AM | #9 |
Sigh.....
|
OEM springs are expensive. I'm not against tracking or Auto-xing, it's just not somethng I currently do or would competitively any time in the forseeable future.
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." |
03-02-2010, 11:53 AM | #10 |
crash auto?fix auto
|
Just go eibach. They're fairly inexpensive and give a little drop. If my money situation went better this year I'd have set for you, but I haven't pickedup my new jams yet
|
03-02-2010, 03:57 PM | #11 |
サバンナFC3S RX-7
|
Just go Tokico Blues and Tanabe GF-210s. Blues are essentially almost an OEM replacement. The Tanabe springs will make the car slightly stiffer but the ride comfort is still the same. Essentially you would have parts that allow you to push the FC through corners a little more than stock but still being a comfortable car to drive to the market, work, or school
__________________
Series 5 GTU |
03-02-2010, 08:19 PM | #13 |
Test Whore - Admin
|
NOT EVEN CLOSE!!! Have you ever driven a stock FC before? Or one with that setup? You would need to try REALLY hard to be more wrong.... sorry dude.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
03-02-2010, 09:49 PM | #14 |
Sigh.....
|
Since I've never been in a car with Blues/210s, the correct statement would be:___________________________. ??
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." |
03-02-2010, 11:09 PM | #15 | |
Pirate
|
Quote:
Nah, j/k, but seriously, you bought a rotary sports car for comfort? WTF? Dont you know the true nature of a real 7 is to be loud as f**k and uncomfortable, bone jarring, wicked awesome, kick everyones ass at the track/ auto-x, and handle like it's on rails? Also, I can understand that you might not have the time/ability to track your car, but even then.... My car rides already rides like shit, the suspension is real soft, but all the bumps and stuff feel like in a car with coils. Maybe your ride is a lot better with new shocks, but I would trade a soft and shitty ride for a firm and a little less shitty ride any day. Then, there is also the issue of price. I would pay roughly $500 for new shocks. A set of stance GR+ can be had for $1,000 (if you know people) and then you can get softer springs for that. Adding to that the ride height, corner weight, and stiffness adjustability, and I just can NOT see what the big deal is. I a lot of people seem to be all like "OMFG coilovers, they are too stiff, they suck, I like to have a comfortable car.... blah blah blah, etc. Get over your self. it's not "THAT" fucking bad. On top of that, not all "coilovers" are these "Super stiff monsters" some people claim them to be. Some are, but there are also versions geared for more comfortable ride, and adjustability over cornering. TEIN has good models for street driving. Stance offer softer springs for their products, and ground control sleeves can be paired with an adjustable shock like a KYB agx, which can be stiffened up, and then softened for the ride home. I've driven cars with coilovers, ridden in a lot of them, and know enough to give a good suggestion. Do you have any first hand experience with them?
__________________
Rotaries:They are NOT that complicated! Last edited by Max777; 03-02-2010 at 11:24 PM.. |
|