rebuild

13bboy · 01-22-2010, 05:16 AM

would i b able 2 rebuild my 13bt just with a workshop manual???

djmtsu · 01-22-2010, 07:41 AM

If you can closely follow instructions, and measure everything 3 times, than of course you can!

If not, there are plenty of builders here that can help you out.

Max777 · 01-22-2010, 06:45 PM

Technically, no, you will need the following:

Engine hoist
engine stand
rotary engine stand adaptor
a metric set of sockets, wrenches, screwdrivers
a rotary engine rebuild kit
any needed housings, rotors, etc
A proper, heated, secure working facility
about 40 hours of actual work, give or take.
A variety cleaning solvents, grease, sealants etc.

So no, you can't rebuild your engine using paper for apex seals!

EDIT: on the other hand, you are trying to ask if the DIRECTIONS in the Haynes manual are adequate enough, then yes... somewhat... if you already have some experience rebuilding the engine... so no, not really, not for your first time.

I suggest buying a black ink cartidge for your car, and then printing the engine rebuild section from the online Factory Service Manual... (should be 50~60 pages or so) As well as purchasing a few rotary engine rebuild DVD's from Atkins, Mazdatrix, etc.

13bboy · 01-22-2010, 07:21 PM

Quote:

Originally Posted by Max777

Technically, no, you will need the following:

Engine hoist
engine stand
rotary engine stand adaptor
a metric set of sockets, wrenches, screwdrivers
a rotary engine rebuild kit
any needed housings, rotors, etc
A proper, heated, secure working facility
about 40 hours of actual work, give or take.
A variety cleaning solvents, grease, sealants etc.

So no, you can't rebuild your engine using paper for apex seals!

EDIT: on the other hand, you are trying to ask if the DIRECTIONS in the Haynes manual are adequate enough, then yes... somewhat... if you already have some experience rebuilding the engine... so no, not really, not for your first time.

I suggest buying a black ink cartidge for your car, and then printing the engine rebuild section from the online Factory Service Manual... (should be 50~60 pages or so) As well as purchasing a few rotary engine rebuild DVD's from Atkins, Mazdatrix, etc.

obviously, cheers tho!!

Max777 · 01-22-2010, 07:24 PM

obviously kidding.

The reason I did that was because of your post's title, and the sentence structure you used:

Quote:

would i b able 2 rebuild my 13bt just with a workshop manual???

13bboy · 01-22-2010, 08:02 PM

yea i was just tryn 2 keep the question simple

djmtsu · 01-22-2010, 08:07 PM

And I answered it long ago.....

Mobius · 01-22-2010, 08:19 PM

Quote:

Originally Posted by djmtsu

And I answered it long ago.....

Awwwww

13bboy · 01-22-2010, 08:56 PM

haha

Max777 · 01-24-2010, 03:31 PM

Quote:

Originally Posted by djmtsu

And I answered it long ago.....

wait, what? you wanna check them posting days?

djmtsu · 01-24-2010, 04:08 PM

Me 6:41 am

You 5:45 pm

Anything else?

Max777 · 01-25-2010, 04:54 PM

the way you said it, it seems like you meant to say your reply was a year earlier or something when they were both relatively close.

djmtsu · 01-25-2010, 06:08 PM

Quote:

Originally Posted by Max777

the way you said it, it seems like you meant to say your reply was a year earlier or something when they were both relatively close.

Nah. I got confused too..

Whizbang · 01-25-2010, 11:50 PM

i dont think the engine stand adapter is that needed. Buckets can work.

Ender · 01-26-2010, 06:51 AM

Quote:

Originally Posted by Gravity Fed

i dont think the engine stand adapter is that needed. Buckets can work.

It is really nice though.

01-22-2010, 05:16 AM	#1
13bboy Rotary Fan in Training Join Date: Jan 2010 Location: australia iTrader: (0) Posts: 71 Rep Power: 15	rebuild would i b able 2 rebuild my 13bt just with a workshop manual???

01-22-2010, 07:41 AM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	If you can closely follow instructions, and measure everything 3 times, than of course you can! If not, there are plenty of builders here that can help you out. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-22-2010, 06:45 PM	#3
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Technically, no, you will need the following: Engine hoist engine stand rotary engine stand adaptor a metric set of sockets, wrenches, screwdrivers a rotary engine rebuild kit any needed housings, rotors, etc A proper, heated, secure working facility about 40 hours of actual work, give or take. A variety cleaning solvents, grease, sealants etc. So no, you can't rebuild your engine using paper for apex seals! EDIT: on the other hand, you are trying to ask if the DIRECTIONS in the Haynes manual are adequate enough, then yes... somewhat... if you already have some experience rebuilding the engine... so no, not really, not for your first time. I suggest buying a black ink cartidge for your car, and then printing the engine rebuild section from the online Factory Service Manual... (should be 50~60 pages or so) As well as purchasing a few rotary engine rebuild DVD's from Atkins, Mazdatrix, etc. __________________ Rotaries:They are NOT that complicated! Last edited by Max777; 01-22-2010 at 06:48 PM..

01-22-2010, 08:07 PM	#7
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	And I answered it long ago..... __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-24-2010, 04:08 PM	#11
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Me 6:41 am You 5:45 pm Anything else? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-22-2010, 08:02 PM	#6
13bboy Rotary Fan in Training Join Date: Jan 2010 Location: australia iTrader: (0) Posts: 71 Rep Power: 15	yea i was just tryn 2 keep the question simple

01-22-2010, 08:56 PM	#9
13bboy Rotary Fan in Training Join Date: Jan 2010 Location: australia iTrader: (0) Posts: 71 Rep Power: 15	haha

01-25-2010, 04:54 PM	#12
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	the way you said it, it seems like you meant to say your reply was a year earlier or something when they were both relatively close. __________________ Rotaries:They are NOT that complicated!

01-25-2010, 11:50 PM	#14
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	i dont think the engine stand adapter is that needed. Buckets can work. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode