Great way to clean your UIM

RXtacy · 03-16-2008, 02:14 PM

So I had read a while back on the other forum about a guy using steel wool to clean his UIM. Well I had my UIM to put on some block off plates, and troubleshoot a few things so I decided it would be a good time to give it a good cleaning. I went to Lowes and got some course steel wool, as well as some medium steel wool. I started off with the course and finished with the medium. Finishing with the medium definitely gave it a little bit more shine. I must say I am very impressed with this method. However, I would not suggest doing it with the UIM in the car because steel wool shards do get everywhere, and I would not want them sucked in my engine or alternator. Here are some before and after pics to show the difference.

Before... I know not a great shot but it's all I have.

After...

***Herblenny*** · 03-16-2008, 05:43 PM

WOW! PRetty cool! I never thought about using steel wool to clean.. Great info!!

tom93r1 · 03-17-2008, 09:19 AM

That looks pretty good! about the same look we get with media blasting, I like it better than the polished look myself.

RXtacy · 03-17-2008, 02:42 PM

Yea I dont have a blast cabinet so that wasn't an option. I'm not sure which look I like better I think I will have a better feel once I get it back in the engine bay. I'm pretty happy with the results for a little bit of time and $6.

MaczPayne · 03-17-2008, 03:12 PM

Looking good there! How long did the process take?

RXtacy · 03-17-2008, 04:12 PM

It took me about 3 hrs, but I started off with household steel wool with the soap layer for cleaning dishes which was very ineffective. If I had started with the industrial steel wool it probably would have been under an hr. Oh I also cleaned the ISC solenoid in that time.

ppritchard · 03-17-2008, 07:15 PM

Can you post a pic of the engine bay after the cleaning? It's hard to tell the full impact without seeing the bay. Piece looks nice though.

RXtacy · 03-17-2008, 07:23 PM

Yea I will once I get it back in. I am waiting for some gaskets from Ray, and a few other things before I put it back in. Trust me though it is a world of difference, before it was brownish grey, now it looks probably a bit shinier then brand new.

a7xh7 · 03-17-2008, 10:29 PM

this method is a lot better than using mothers mag/aluminum polish like i did. its faster and looks the same.

SLOASFK · 03-17-2008, 11:50 PM

very nice.

SPICcnmFD · 03-18-2008, 07:21 AM

Nice I may have to try this, mine is looking like yours did!!

bbade · 03-19-2008, 03:32 PM

Looks great, much cheaper than getting it polished too.

GEO147 · 03-19-2008, 08:11 PM

Besides the steel wool, what else did you use, is it just a bit of soapy water or what??

Bye the way it looks super, gona give it a bash myself. I had the UIM off recently and didnt ralise that it could be shined up like that, thanks for the heads up!!

RXtacy · 03-19-2008, 09:47 PM

To be honest pretty much just water. Every once in a while I sprayed some simple green, but I don't think it did much. I just kept a pan of clean water next to me, and after a little bit of rubbing I would dunk the steel wool to clean it out, wipe down the manifold with a towel and start over again.

FD3S2005 · 03-19-2008, 10:53 PM

humm interesting, i must go try this

03-16-2008, 05:43 PM	#2
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	WOW! PRetty cool! I never thought about using steel wool to clean.. Great info!! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-17-2008, 03:12 PM	#5
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	Looking good there! How long did the process take? __________________ Johnson TA FC in the works!

03-17-2008, 10:29 PM	#9
a7xh7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 88 Rep Power: 0	this method is a lot better than using mothers mag/aluminum polish like i did. its faster and looks the same. __________________ "sevens_ix"

03-18-2008, 07:21 AM	#11
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Nice I may have to try this, mine is looking like yours did!! __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

03-19-2008, 03:32 PM	#12
bbade Rotary Fanatic Join Date: Mar 2008 Location: Macungie, PA iTrader: (0) Posts: 163 Rep Power: 17	Looks great, much cheaper than getting it polished too. __________________ Proud owner of a base 1993 Montego Blue FD. PFC, RB single tip, Koyo Radiator, KDR rebuilt motor, polished OEM front strut bar, FEED replica sideskirts, OEM 99 spec rear spoiler, SuperPro Bushings Many thanks to Dave at KDR for sparking my rotor addiction.

03-17-2008, 09:19 AM	#3
tom93r1 Rotary Fan in Training Join Date: Feb 2008 iTrader: (0) Posts: 45 Rep Power: 0	That looks pretty good! about the same look we get with media blasting, I like it better than the polished look myself.

03-17-2008, 07:15 PM	#7
ppritchard Rotary Fan in Training Join Date: Feb 2008 Location: Orlando iTrader: (0) Posts: 43 Rep Power: 0	Can you post a pic of the engine bay after the cleaning? It's hard to tell the full impact without seeing the bay. Piece looks nice though.

03-17-2008, 11:50 PM	#10
SLOASFK Rotary Fanatic Join Date: Feb 2008 Location: Lancaster, PA iTrader: (4) Posts: 155 Rep Power: 17	very nice.

03-19-2008, 08:11 PM	#13
GEO147 The Newbie Join Date: Mar 2008 Location: Dublin, Ireland iTrader: (0) Posts: 2 Rep Power: 0	Besides the steel wool, what else did you use, is it just a bit of soapy water or what?? Bye the way it looks super, gona give it a bash myself. I had the UIM off recently and didnt ralise that it could be shined up like that, thanks for the heads up!!

03-19-2008, 10:53 PM	#15
FD3S2005 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 10 Rep Power: 0	humm interesting, i must go try this