My new intercooler for my 1st gen car

Bryan@BNR · 11-19-2009, 11:23 PM

Out with the NPR and in with the water/air intercooler! I made it go in with 4 clamps, and 2 couplers

. No pressure drop, get to keep air conditioning, Filter has more room for movement and it isn't the norm!

05rex8 · 11-19-2009, 11:28 PM

looking great Bryan!

NoDOHC · 11-20-2009, 12:40 AM

That does look nice!

Have you tested efficiency yet (what are charge air temps)?

Bryan@BNR · 11-20-2009, 11:31 AM

Quote:

Originally Posted by NoDOHC

That does look nice!

Have you tested efficiency yet (what are charge air temps)?

Not in this intercooler but I have a few cars that run liquid coolers. They have zero pressure drop which helps spool up. Also you don't have to worry about outflowing this intercooler.

I have methenol injection so charge temps will be below ambient at any point when the engine runs more than 10-14 psi of boost.

Bryan@BNR · 11-20-2009, 06:41 PM

Final product.

Back in black!

dregg100 · 11-20-2009, 10:02 AM

nice BOV on the radiator!!!!

looks good man, i have always been curious of those type intercoolers

***ZGN*** · 11-20-2009, 07:08 PM

I'll be at the oak mt meet this Sunday around 1-2pm if I don't see ya there I am going to have to come by and check that out!

It looks interesting!

***TitaniumTT*** · 11-20-2009, 10:45 PM

Looks awesome Bryan.... love it. Thinking about something similar on my FD project.

sk8world · 11-22-2009, 01:04 PM

looks nice! No BOV? Going to do air-water on the 3 also.

djmtsu · 11-22-2009, 02:31 PM

This FB better be at DGRRX.

I might have to leave some man juice on it.

Bryan@BNR · 11-22-2009, 11:03 PM

Hey Mike.

If you look on the last 2 pics where the IC is black, you can see it on the smaller pipe. It is tucked under the pipe. The other pics were just after I welded up the pipes.

Bryan@BNR · 11-22-2009, 11:00 PM

Nah, it has a full spool and a locker in the rear, so 318 turns in 11 miles will wear me out! I have my wifes car up and running so I guess I will drive that.

sk8world · 11-23-2009, 01:49 AM

Did you go to Steele last weekend? I heard they had it on kill mod for the Orsca event. Only 1/8th mile but I heard some records were laid down. Also had a friend run a new BP that night. I am down until I fix my diff/axels.....

Bryan@BNR · 11-23-2009, 09:20 AM

I heard about it, but didn't go. Get that car going! I am possibly fixing the engine next weekend in the 1g. Shouldn't take long...

sk8world · 11-23-2009, 12:06 PM

track in huntsville is closed till spring now so I will be draging my feet. I really want to grt the rx3 running by the end of the season.

11-19-2009, 11:28 PM	#2
05rex8 Turbo 8 Join Date: Oct 2008 iTrader: (0) Posts: 131 Rep Power: 17	looking great Bryan! __________________

11-20-2009, 12:40 AM	#3
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	That does look nice! Have you tested efficiency yet (what are charge air temps)? __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

11-20-2009, 10:02 AM	#6
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	nice BOV on the radiator!!!! looks good man, i have always been curious of those type intercoolers __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

11-20-2009, 07:08 PM	#7
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	I'll be at the oak mt meet this Sunday around 1-2pm if I don't see ya there I am going to have to come by and check that out! It looks interesting! __________________ Kevin

11-20-2009, 10:45 PM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Looks awesome Bryan.... love it. Thinking about something similar on my FD project. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-22-2009, 01:04 PM	#9
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	looks nice! No BOV? Going to do air-water on the 3 also. __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c

11-22-2009, 02:31 PM	#10
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	This FB better be at DGRRX. I might have to leave some man juice on it. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

11-22-2009, 11:03 PM	#11
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	Hey Mike. If you look on the last 2 pics where the IC is black, you can see it on the smaller pipe. It is tucked under the pipe. The other pics were just after I welded up the pipes.

11-22-2009, 11:00 PM	#12
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	Nah, it has a full spool and a locker in the rear, so 318 turns in 11 miles will wear me out! I have my wifes car up and running so I guess I will drive that.

11-23-2009, 01:49 AM	#13
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	Did you go to Steele last weekend? I heard they had it on kill mod for the Orsca event. Only 1/8th mile but I heard some records were laid down. Also had a friend run a new BP that night. I am down until I fix my diff/axels..... __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c

11-23-2009, 09:20 AM	#14
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	I heard about it, but didn't go. Get that car going! I am possibly fixing the engine next weekend in the 1g. Shouldn't take long...

11-23-2009, 12:06 PM	#15
sk8world 600rwhp club member. Join Date: Mar 2008 iTrader: (2) Posts: 551 Rep Power: 17	track in huntsville is closed till spring now so I will be draging my feet. I really want to grt the rx3 running by the end of the season. __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c