New style hard nylon motor mounts

Garfinkles Motor Works · 06-30-2009, 05:14 PM

This design features no metal to metal contact.

Garfinkles Motor Works · 06-30-2009, 05:17 PM

Shows the finish product. Can be cut to the length needed as used with the garfinkle oil pan brace.

AchillesGr · 02-23-2010, 12:27 PM

hi ,
how much is it costs?
how i install them? do you have any webpage to take a look?
thank!

Garfinkles Motor Works · 02-24-2010, 03:07 PM

The cost is $200 shipped in the USA .I will need to get your old set in exchange .They install as the stock ones after you drill the frame hole out to 1/2 inch .I use a 1/2 inch grade 8 allen fine threaded bolt and self locking nut with it for more strengh .It is easy to drill the holes from the bottom .I do not have a webpage .The mounts can be made 3/16 inch shorter if you are using my oil pan brace,then the motor will sit at the stock height. Thanks David

dudemaaan · 02-24-2010, 03:28 PM

looks nice man

Garfinkles Motor Works · 04-23-2010, 07:39 AM

To those who have bought motor mounts and not sent back the old stock cores please do so to complete the deal ,thanks .

goracer · 06-09-2010, 03:30 AM

I don't want to be rude or out of line but are these less likely to melt or crack and crumble from the heat like the red versions I bought years back (in a group buy from another vendor)?

Garfinkles Motor Works · 06-09-2010, 07:43 AM

I was told they will resist the heat when I bought the materal. Maybe they lied,as with any of my things if it fails in a unreasonable time get your money back when you return the part.

***Herblenny*** · 06-09-2010, 09:18 AM

goracer, glad you found the link

Garfinkle is a stand up guy and all his parts are well thought of. I don't think you'll have any issues with his products... also just as he stated, he will give your money back if it fails.

Kentetsu · 06-09-2010, 09:55 AM

Very nice. Are these for 2nd gen? or 3rd gen? (sorry for the stupid question, probably obvious to everyone else)

.

Garfinkles Motor Works · 06-09-2010, 07:45 PM

third gen

OverRev · 06-18-2010, 09:19 PM

David, how is ur nylon mount compare to polyurethane mount and the factory rubber mount? is it harder or softer?

Garfinkles Motor Works · 06-19-2010, 10:55 AM

Hard compared to factory .

02-24-2010, 03:28 PM	#5
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 17	looks nice man __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!

06-09-2010, 09:18 AM	#9
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	goracer, glad you found the link Garfinkle is a stand up guy and all his parts are well thought of. I don't think you'll have any issues with his products... also just as he stated, he will give your money back if it fails. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

06-09-2010, 09:55 AM	#10
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan Posts: 530 Rep Power: 18	Very nice. Are these for 2nd gen? or 3rd gen? (sorry for the stupid question, probably obvious to everyone else) . __________________ "Learn from the past, or it will become your future...." '85 GS 12a + LSD/Sterling carb/Respeed coilovers/Respeed front swaybar/Respeed adj. rear spring perches/Illuminas/Bilsteins on rear AutoX vids @ http://www.youtube.com/user/Kentetsu1

02-23-2010, 12:27 PM	#3
AchillesGr The Newbie Join Date: Feb 2010 Posts: 5 Rep Power: 0	hi , how much is it costs? how i install them? do you have any webpage to take a look? thank!

02-24-2010, 03:07 PM	#4
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	The cost is $200 shipped in the USA .I will need to get your old set in exchange .They install as the stock ones after you drill the frame hole out to 1/2 inch .I use a 1/2 inch grade 8 allen fine threaded bolt and self locking nut with it for more strengh .It is easy to drill the holes from the bottom .I do not have a webpage .The mounts can be made 3/16 inch shorter if you are using my oil pan brace,then the motor will sit at the stock height. Thanks David

04-23-2010, 07:39 AM	#6
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	To those who have bought motor mounts and not sent back the old stock cores please do so to complete the deal ,thanks .

06-09-2010, 03:30 AM	#7
goracer The Newbie Join Date: Mar 2008 Posts: 10 Rep Power: 0	I don't want to be rude or out of line but are these less likely to melt or crack and crumble from the heat like the red versions I bought years back (in a group buy from another vendor)?

06-09-2010, 07:43 AM	#8
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I was told they will resist the heat when I bought the materal. Maybe they lied,as with any of my things if it fails in a unreasonable time get your money back when you return the part.

06-09-2010, 07:45 PM	#11
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	third gen

06-18-2010, 09:19 PM	#12
OverRev The Newbie Join Date: Apr 2010 Posts: 2 Rep Power: 0	David, how is ur nylon mount compare to polyurethane mount and the factory rubber mount? is it harder or softer?

06-19-2010, 10:55 AM	#13
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Hard compared to factory .