|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
|
03-18-2009, 11:45 PM | #1 |
RCC Loves Me Not You
|
EGR Wire
I'm sitting here looking at my engine harness trying to remember which color plug attached to which solinoid that directed air to actuate the EGR. I don't have the rats nest near by, but I'll be checking the FSM soon. I just for the life of me can't remember which wire it is.
I plan on removing the clips for the different solenoids and use the EGR as the output for the boost control solenoid to handle my 6PI delivery. I'll also need to alter my Var-Resistor to be my Alternate input for logging my AFR's. But which wire to I prep for input... I guess I'll check out to see what RTek says about which wires.
__________________
The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group |
03-18-2009, 11:52 PM | #2 |
RCC Loves Me Not You
|
Confirm: Blue and White is output voltage for EGR?
__________________
The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group |
03-19-2009, 11:49 PM | #4 |
RCC Loves Me Not You
|
The solenoid is yellow. The wire I need however is blue/white. which is on the yellow plug. Thanks for your help!
__________________
The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group |