Considering parting out my BNR setup.

zonblitz · 03-09-2009, 10:27 AM

Most of you know my car and it's been meticulously maintained.

BNR Stage 3 Turbos with ~9500 miles on them. Make 426 rwhp @17psi Brian installed a larger wastegate than he usually does by my request though for now the size escapes my memory.

Gorilla RE Ported Exhaust Manifold.

Bonez SS Down pipe (wrapped)

Chromed Primary and Secondary intake pipes

M2 CF Intake box with brand new KnN filters (less than 300 miles)

Polished Efini Y-pipe

Stock R1 Oil Coolers with ducts

I am considering going single since I want to start racing the car. The BNR's are great for power, quick spooling and hassel-free operation but for the length of time that I want to run the car (20 laps at 1.8 mile road course) the BNR's will see some heat sink and won't allow me to run they way a more efficient single would.

I can post pics but I'm sure there are a million shots of my engine bay on here.

I've not set individual prices yet but I would prefer to sell the whole package to one person who's looking for a great turn-key turbo set up. Total Package Price is $3200.

neit_jnf · 03-09-2009, 05:37 PM

are they sequential? post the dyno!

interested in the intake hard pipes for the m2 box and the smic with cf duct and pipes, prices?

zonblitz · 03-09-2009, 07:23 PM

No, they are non-sequential.

At the moment I am not looking to part out. The intercooler stays for now as we are likely going to do a V-mount with it.

neit_jnf · 03-09-2009, 07:47 PM

if you decide to do a v-mount will you sell the cf smic duct? interested!

zonblitz · 03-10-2009, 10:05 AM

Maybe, just depends on if I can use it or not.

zonblitz · 03-13-2009, 02:31 PM

Ok, this is going to happen the only variable is when.

I'll be at deals gap so if any of you who may be interested you can check it out for yourself.

zonblitz · 03-21-2009, 04:36 PM

Tentatively the turbos/y-pipe/exhaust manifold are sold pending deposit.

I am not taking the parts off the car until mid-May
I require a deposit if you want to buy the parts. If anything happens in the meantime all deposits are fully refundable. They are not refundable because you changed your mind. The idea is to have buyers when the parts come off so they can be shipped out right away.

All prices do not include shipping

Still available:

M2 CF intake with new filters, turbohoses.com chromed hard pipes and samco couplers. $575

Bonez SS DP (Heat Wrapped) $150

Polished secondary intake pipe (the one that goes to the rear turbo $100)

R1 oil coolers with ducts $350

I may be selling CWR IC with CF duct and Mazdaspeed/Ron davis Racing Radiator also but haven't decided what I'm doing there yet.

If I do, prices will be $1300 for CWR IC with CF Duct and $600 for radiator.

zonblitz · 03-22-2009, 07:17 AM

Deposit received for turbos/exh manifold/y-pipe

03-09-2009, 05:37 PM	#2
neit_jnf Boricua! Join Date: Jul 2008 Location: Puerto Rico Posts: 99 Rep Power: 18	are they sequential? post the dyno! interested in the intake hard pipes for the m2 box and the smic with cf duct and pipes, prices? Last edited by neit_jnf; 03-09-2009 at 05:42 PM.

03-10-2009, 10:05 AM	#5
zonblitz Rotary Fanatic Join Date: Feb 2008 Location: Pearl River, LA Posts: 166 Rep Power: 18	Maybe, just depends on if I can use it or not. __________________ Kenny If you need a website, or know anyone who does, look me up: www.efiniconsulting.com

03-13-2009, 02:31 PM	#6
zonblitz Rotary Fanatic Join Date: Feb 2008 Location: Pearl River, LA Posts: 166 Rep Power: 18	Ok, this is going to happen the only variable is when. I'll be at deals gap so if any of you who may be interested you can check it out for yourself. __________________ Kenny If you need a website, or know anyone who does, look me up: www.efiniconsulting.com

03-21-2009, 04:36 PM	#7
zonblitz Rotary Fanatic Join Date: Feb 2008 Location: Pearl River, LA Posts: 166 Rep Power: 18	Tentatively the turbos/y-pipe/exhaust manifold are sold pending deposit. I am not taking the parts off the car until mid-May I require a deposit if you want to buy the parts. If anything happens in the meantime all deposits are fully refundable. They are not refundable because you changed your mind. The idea is to have buyers when the parts come off so they can be shipped out right away. All prices do not include shipping Still available: M2 CF intake with new filters, turbohoses.com chromed hard pipes and samco couplers. $575 Bonez SS DP (Heat Wrapped) $150 Polished secondary intake pipe (the one that goes to the rear turbo $100) R1 oil coolers with ducts $350 I may be selling CWR IC with CF duct and Mazdaspeed/Ron davis Racing Radiator also but haven't decided what I'm doing there yet. If I do, prices will be $1300 for CWR IC with CF Duct and $600 for radiator. __________________ Kenny If you need a website, or know anyone who does, look me up: www.efiniconsulting.com Last edited by zonblitz; 03-22-2009 at 07:16 AM.

03-22-2009, 07:17 AM	#8
zonblitz Rotary Fanatic Join Date: Feb 2008 Location: Pearl River, LA Posts: 166 Rep Power: 18	Deposit received for turbos/exh manifold/y-pipe __________________ Kenny If you need a website, or know anyone who does, look me up: www.efiniconsulting.com

03-09-2009, 07:47 PM	#4
neit_jnf Boricua! Join Date: Jul 2008 Location: Puerto Rico Posts: 99 Rep Power: 18	if you decide to do a v-mount will you sell the cf smic duct? interested!