Elk Grove, CA FS: Collection of parts

[Apex944]

Guitar Junkie serpentine pulley kit with about a 18% underdrive.
Alternator pulley has been machined to accept an FD alternator shaft.
Comes with a new belt.
$150 OBO

S4 T2 front sway bar with polyurethane end link bushing kit- $50

Pair of front T2 4 piston calipers- $40

2 brand new FC 13BT rotor bearings from mazdatrix- $40

S4 T2 turbocharger Wastegate has been ported and a new flapper door welded onto the actuator arm to compensate for the larger hole. Ported to approx 30mm. Just removed from my T2 last week and was running 10 lb's on it. Side to side play is excellent, but in/out play is bad. Need's a rebuild. $80

S4 T2 exhaust manifold with the twin scroll removed, tapped, and a bolt installed.
No EGR hole either, meaning it is not from america.
$35

S4 T2 exhaust manifold with twin scroll removed, tapped, and a bolt installed. The american version with the EGR hole for emissions.
$35

S4 T2 N333 ECU for sale- $70 shipped


I am open to trades for the following, but not limited to, parts.
Feel free to offer whatever parts you are willing to trade, just please no regular stock parts. Looking for mostly aftermarket.

Low impedence stock fuel rail fitting 720cc, 750cc, 850cc, 1000cc injectors

2.0 or 2.1 for S4 T2 N332/N333
PDA that is compatible for the Rtek 2.0, 2.1

MMR or similar trans mounts, diff mounts, DTSS eliminator bushing's

Adjustable fuel pressure regulator, name brand only

FD dual alternator pulley for the FC v-belt engine

Coilover suspension


Offers are welcome on any of the parts

I will only ship to the U.S., NO out of the country shipping.
Local pickup is welcome also.



Can contact me by PM or Email at apex944@hotmail.com