exhaust leak from turbo

FerociousP · 08-12-2008, 09:22 PM

I finally decided to fix my exhaust leak that I've had for a few months and couldn't quite pinpoint it so I decided to replace all the gaskets that looked questionable... I replaced them and still leaks.

It turns out the it is leaking from where the hotside meets the cartridge. I've tried to tighten down the bolts but no luck. When I was building the motor I took the turbo apart and sandblasted the mating areas to clean them of debris and were good when first run. I'm thinking I cracked the hotside. Anyone have this happen before??

Boostmaniac · 08-13-2008, 02:31 AM

Probably a crack, it happens a lot.

djmtsu · 08-13-2008, 08:51 AM

Like Boost said. I guess we need to find you an S5 hotside, or if you can get your hands on a T04, I have that manifold you can use!!

FerociousP · 08-13-2008, 08:53 AM

ok... nathaniel, you have any s5 or other turbo parts??

anyone else have just a hotside?

85rx-7gsl-se · 08-13-2008, 09:21 AM

Actually I do have some S5 stuff, but its 4 hours away from me lol.

djmtsu · 08-13-2008, 11:00 AM

Quote:

Originally Posted by 85rx-7gsl-se

Actually I do have some S5 stuff, but its 4 hours away from me lol.

Surely your dad could arrange a meet!!

classicauto · 08-13-2008, 10:12 AM

I've got a whole S5 manifold turbo heatshield setup in MINT shape $150.......buyer backed out.

Shipping might kill though

FerociousP · 08-13-2008, 12:37 PM

yea nathaniel, whatcha got?

Quote:

I've got a whole S5 manifold turbo heatshield setup in MINT shape $150.......buyer backed out.

Shipping might kill though

lookin to go cheap because I'm not driving car right now... if it turns out I need more i'll get in touch with you... how many miles are on it? pics?

classicauto · 08-13-2008, 06:01 PM

Quote:

Originally Posted by FerociousP

yea nathaniel, whatcha got?

lookin to go cheap because I'm not driving car right now... if it turns out I need more i'll get in touch with you... how many miles are on it? pics?

No idea on mileage, it was pulled from a re-man J-spec......no cracks anywhere to be found, absolutely mint stuff.

Pics on other forum....if you reach the point where you're interested we'll go from there - these guys can fix you up more locally no doubt

85rx-7gsl-se · 08-13-2008, 01:03 PM

I have a full T04B/S5 Hybrid with a bad turbine shaft. I may let just the exhaust housing go, let me think on it.

djmtsu · 08-13-2008, 01:51 PM

Quote:

Originally Posted by 85rx-7gsl-se

I have a full T04B/S5 Hybrid with a bad turbine shaft. I may let just the exhaust housing go, let me think on it.

PM me on the rest of it.

Boostmaniac · 08-14-2008, 11:54 AM

JDM turbine housings are the shit. Mine looks flawless like it just came from the factory. Same story for the manifold. Also NO rust ANYWHERE on either.

08-12-2008, 09:22 PM	#1
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro iTrader: (2) Posts: 1,046 Rep Power: 18	exhaust leak from turbo I finally decided to fix my exhaust leak that I've had for a few months and couldn't quite pinpoint it so I decided to replace all the gaskets that looked questionable... I replaced them and still leaks. It turns out the it is leaking from where the hotside meets the cartridge. I've tried to tighten down the bolts but no luck. When I was building the motor I took the turbo apart and sandblasted the mating areas to clean them of debris and were good when first run. I'm thinking I cracked the hotside. Anyone have this happen before?? __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD Last edited by FerociousP; 08-12-2008 at 11:14 PM..

08-13-2008, 08:51 AM	#3
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Like Boost said. I guess we need to find you an S5 hotside, or if you can get your hands on a T04, I have that manifold you can use!! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

08-13-2008, 08:53 AM	#4
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro iTrader: (2) Posts: 1,046 Rep Power: 18	ok... nathaniel, you have any s5 or other turbo parts?? anyone else have just a hotside? __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

08-13-2008, 02:31 AM	#2
Boostmaniac Rotary Fanatic Join Date: Apr 2008 iTrader: (0) Posts: 182 Rep Power: 0	Probably a crack, it happens a lot.

08-13-2008, 10:12 AM	#7
classicauto crash auto?fix auto Join Date: Feb 2008 iTrader: (0) Posts: 816 Rep Power: 17	I've got a whole S5 manifold turbo heatshield setup in MINT shape $150.......buyer backed out. Shipping might kill though

08-14-2008, 11:54 AM	#12
Boostmaniac Rotary Fanatic Join Date: Apr 2008 iTrader: (0) Posts: 182 Rep Power: 0	JDM turbine housings are the shit. Mine looks flawless like it just came from the factory. Same story for the manifold. Also NO rust ANYWHERE on either.