S4 Wastegate porting

impulsive-RX7 · 06-15-2008, 08:31 PM

Bryan

I just acquired a hybrid turbo. It has an S4 turbine housing; I need to get the wastegate ported. I don't have the hook up at the 2nd Maintenance Battalion machine shop like I used to. Can I ship the turbine housing by itself to you, and how much would it cost me? Also, what would you estimate the turn around time to be?

Thanks

Jason

Bryan@BNR · 06-17-2008, 01:12 PM

$225 for the turbine housing to be machined, and the stainless valve assembly to be installed. The port is around 33mm right off the machine, but I can easily hand port that to around 35mm.

Bryan@BNR
205 640 1193

06-15-2008, 08:31 PM	#1
impulsive-RX7 Rotary Fanatic Join Date: Feb 2008 Location: Jacksonville, NC iTrader: (0) Posts: 105 Rep Power: 17	S4 Wastegate porting Bryan I just acquired a hybrid turbo. It has an S4 turbine housing; I need to get the wastegate ported. I don't have the hook up at the 2nd Maintenance Battalion machine shop like I used to. Can I ship the turbine housing by itself to you, and how much would it cost me? Also, what would you estimate the turn around time to be? Thanks Jason

06-17-2008, 01:12 PM	#2
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	$225 for the turbine housing to be machined, and the stainless valve assembly to be installed. The port is around 33mm right off the machine, but I can easily hand port that to around 35mm. Bryan@BNR 205 640 1193