Post your hp with bnr turbo

rotoriousrx7 · 06-10-2008, 12:37 PM

http://rotarycarclub.com/showthread....7866#post27866

310 rwhp @12 psi
supposed to be some kind of correction (10-13%)but we just say 310hp no torque numbers though

***ZGN*** · 06-10-2008, 02:14 PM

363rwhp @16psi Stage 3 non seq, street port, 850pri 1600sec dp/mp PFS intercooler/intake/exhaust, PFC, nippondenso fuel pump, MDS6a on leading, 4 bags of ice on IC. It was a hot day 95+ steve tuned

SPICcnmFD · 06-10-2008, 02:37 PM

351rwhp @16psi BNR stg. 3's

stock reman
sequential
4x850cc
DP, MP, Racing Beat CB
Intakes
Custom SMIC and ducting
PFC
tuned by me, now it's tuned better by me so it's probably a little higher

Phoenix7 · 06-10-2008, 02:45 PM

Fellas, don't forget to add what year car and Mods so we can have a good comparison. Mods/admins feel free to delete this post afterwards.

88turboii · 06-11-2008, 03:28 PM

308whp at 12 psi, stockport S4 TII with blown coolant seals, very conservative tune

RX7 RAGE · 06-12-2008, 12:17 AM

Anybody dyno on 91 octane yet?

gxlbiscuit · 06-14-2008, 10:27 PM

stage 3 303hp (dynojet) at 16.5 psi with safc2 rtek1.8 750 primaries and 850 secondaries running at 51lbs fuel pressure. rotary aviation seals 2.5 inch exhaust and stock ports 91 octane:-) 88t2

Bryan@BNR · 06-17-2008, 01:15 PM

Quote:

Originally Posted by gxlbiscuit

stage 3 303hp (dynojet) at 16.5 psi with safc2 rtek1.8 750 primaries and 850 secondaries running at 51lbs fuel pressure. rotary aviation seals 2.5 inch exhaust and stock ports 91 octane:-) 88t2

Did you feel a difference with the 3" exhaust conversion after you dynoed 303? 300 RWHP is the limit for 2.5" exhaust.

rotoriousrx7 · 06-19-2008, 12:18 AM

well i have got my ebc figured out now and can get a steady 15 psi till near redline and i talked to the guys that dyno'd my car and they said i should have around 340 ish rwhp @ the 12 psi so idk on how i have near the power of your stage 3's?

but im going to ago back sometime soon and rerun it with all the crap hooked up and get a print out if i can

85rx-7gsl-se · 06-19-2008, 11:29 AM

Quote:

Originally Posted by rotoriousrx7

well i have got my ebc figured out now and can get a steady 15 psi till near redline and i talked to the guys that dyno'd my car and they said i should have around 340 ish rwhp @ the 12 psi so idk on how i have near the power of your stage 3's?

but im going to ago back sometime soon and rerun it with all the crap hooked up and get a print out if i can

Giant Lander's Streetport

88turboii · 06-19-2008, 09:04 AM

what are your EBC settings? i have the profec II and have the same problem, boost drops to 11-12psi at redline

exmanos · 03-29-2009, 11:01 PM

Done my dyno day yesterday

Stage 3 on my 92 FD with PFC,3" exhaust,850 prim. 1600 sec,stock ports,Greddy Smic
300 rwhp@13psi
325 rwhp@16psi
At 16psi i have full power at 6100rpm and keeps that way till 8000 which is very very good...the car has more potential but i'm very happy with it right now and no reason to push it further

SPICcnmFD · 04-09-2009, 01:39 PM

Here are my new numbers, changed the secondaries to 1300s and put a Street port in, besides that everything else is the same, stil seq. Tuned alittle rich at approx. 10.8 afrs.

382 rwhp @ 16psi

Makes 300hp from 5100+

06-10-2008, 12:37 PM	#1
rotoriousrx7 Rotary Fan in Training Join Date: Mar 2008 Location: 37072 iTrader: (1) Posts: 43 Rep Power: 0	Post your hp with bnr turbo http://rotarycarclub.com/showthread....7866#post27866 310 rwhp @12 psi supposed to be some kind of correction (10-13%)but we just say 310hp no torque numbers though

06-10-2008, 02:14 PM	#2
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	363rwhp @16psi Stage 3 non seq, street port, 850pri 1600sec dp/mp PFS intercooler/intake/exhaust, PFC, nippondenso fuel pump, MDS6a on leading, 4 bags of ice on IC. It was a hot day 95+ steve tuned Last edited by ZGN; 06-15-2008 at 05:34 PM..

06-10-2008, 02:37 PM	#3
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	351rwhp @16psi BNR stg. 3's stock reman sequential 4x850cc DP, MP, Racing Beat CB Intakes Custom SMIC and ducting PFC tuned by me, now it's tuned better by me so it's probably a little higher __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1 Last edited by SPICcnmFD; 06-10-2008 at 04:21 PM..

06-19-2008, 09:04 AM	#11
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC iTrader: (0) Posts: 395 Rep Power: 17	what are your EBC settings? i have the profec II and have the same problem, boost drops to 11-12psi at redline Last edited by 88turboii; 06-19-2008 at 09:08 AM..

04-09-2009, 01:39 PM	#13
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Here are my new numbers, changed the secondaries to 1300s and put a Street port in, besides that everything else is the same, stil seq. Tuned alittle rich at approx. 10.8 afrs. 382 rwhp @ 16psi Makes 300hp from 5100+ __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

06-11-2008, 03:28 PM	#5
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC iTrader: (0) Posts: 395 Rep Power: 17	308whp at 12 psi, stockport S4 TII with blown coolant seals, very conservative tune

06-12-2008, 12:17 AM	#6
RX7 RAGE The Newbie Join Date: Mar 2008 Location: San Diego, CA iTrader: (0) Posts: 27 Rep Power: 0	Anybody dyno on 91 octane yet?

06-14-2008, 10:27 PM	#7
gxlbiscuit The Newbie Join Date: Jun 2008 iTrader: (0) Posts: 1 Rep Power: 0	stage 3 303hp (dynojet) at 16.5 psi with safc2 rtek1.8 750 primaries and 850 secondaries running at 51lbs fuel pressure. rotary aviation seals 2.5 inch exhaust and stock ports 91 octane:-) 88t2

06-19-2008, 12:18 AM	#9
rotoriousrx7 Rotary Fan in Training Join Date: Mar 2008 Location: 37072 iTrader: (1) Posts: 43 Rep Power: 0	well i have got my ebc figured out now and can get a steady 15 psi till near redline and i talked to the guys that dyno'd my car and they said i should have around 340 ish rwhp @ the 12 psi so idk on how i have near the power of your stage 3's? but im going to ago back sometime soon and rerun it with all the crap hooked up and get a print out if i can

03-29-2009, 11:01 PM	#12
exmanos Greek Madness! Join Date: Nov 2008 Location: Greece iTrader: (0) Posts: 7 Rep Power: 0	Done my dyno day yesterday Stage 3 on my 92 FD with PFC,3" exhaust,850 prim. 1600 sec,stock ports,Greddy Smic 300 rwhp@13psi 325 rwhp@16psi At 16psi i have full power at 6100rpm and keeps that way till 8000 which is very very good...the car has more potential but i'm very happy with it right now and no reason to push it further