|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
|
09-04-2015, 06:55 AM | #1 |
IT'S ALIVE!
|
S5 Turn/High Beam Switch Pin-out
Can anyone confirm the wire colors and locations for a S5 turn/high beam switch on a car w/o airbags? It's the 10-pin off white/natural connector also known as CR-03 and E-03 in the factory wiring diagrams.
My original harness was buggered up and since finding a reasonably priced replacement appears impossible I'm working on re-pinning a S4 harness to suit the S5 electronics. It's a well-known fact the S5 wiring diagrams are incorrect (depicts S4 configuration). Through continuity testing and yhe "Body Electronics" section of the FSM I think I have the pin-out defined but I want to confirm before I plug anything in. There are several threads about this over on the club but none of them are definitive. Once figured out I'll be sure to add everything I know to this thread. |
09-17-2015, 09:31 AM | #2 |
IT'S ALIVE!
|
I've got this figured out. The S5 wiring diagram pin-outs are indeed incorrect but wire colors are routing are correct. Knowing that information one can deduce the correct pin-out using the "Body Electrical" section of the FSM for the S5. I have this written down at home and will update this thread for future reference.
|