WTB: FC subframe and front control arms for an experiment...

$100T2 · 04-13-2008, 09:05 PM

If anyone comes across something like this, preferably dirt cheap, let me know... I want to see if I can bolt it up to an FB chassis, so it's basically an experiment. I'm willing to risk a little bit of $$$ on trying this, but not too much.

banzaitoyota · 04-13-2008, 09:28 PM

I have it, shipping will be a bitch thiugh, make me an offer

$100T2 · 04-13-2008, 09:29 PM

Quote:

Originally Posted by banzaitoyota

I have it, shipping will be a bitch thiugh, make me an offer

How much do you think shipping will run to 02814?

banzaitoyota · 04-13-2008, 09:43 PM

I need to measure a subframe in daylight to figure shipping out

$100T2 · 04-13-2008, 09:47 PM

Quote:

Originally Posted by banzaitoyota

I need to measure a subframe in daylight to figure shipping out

Cool, let me know.

Banzai is in Aiken, SC if memory serves me correctly.

My5ABaby · 04-13-2008, 09:45 PM

Hey banzai, where are you located? It might be helpful to put it in your info (under your username).

-xlr8planet- · 04-13-2008, 09:49 PM

Hi there man, Im on the same quest myself!

Wheel base of both cars is

66 for the FB
66.5 for the FC

I got a subframe from a theft recovery car a few days ago, I still have to pic it up.

I will try to measure as much as possible.

I also saved the pics from the Norwegian post on the other forum.

A lot of welding is required...

$100T2 · 04-13-2008, 09:51 PM

Quote:

Originally Posted by -xlr8planet-

Hi there man, Im on the same quest myself!

Wheel base of both cars is

66 for the FB
66.5 for the FC

I got a subframe from a theft recovery car a few days ago, I still have to pic it up.

I will try to measure as much as possible.

I also saved the pics from the Norwegian post on the other forum.

A lot of welding is required...

Start a thread in the 2nd Gen tech section with those pics, ok?

-xlr8planet- · 04-13-2008, 09:54 PM

Quote:

Originally Posted by $100T2

Start a thread in the 2nd Gen tech section with those pics, ok?

I will.

I got the steering column, the steering box, the subframe, suspension, calipers, etc

I also got the rear subframe

$100T2 · 04-13-2008, 09:57 PM

Durrrrr, I meant the 1st gen tech section.

mazdadude7 · 04-15-2008, 12:23 AM

I have a front subframe cheap in NC about 2 hours above atlanta and 1 below asheville nc

$100T2 · 04-15-2008, 02:25 PM

How much shipped to 02814????

87 t-66 · 05-06-2008, 03:09 PM

i have the control arms and a rear fc sub frame...shoot me an offer on either.

$100T2 · 05-06-2008, 04:29 PM

I need the front subframe. This is to convert my FB to an FC front suspension.

fire85gslse · 05-08-2008, 09:59 PM

Quote:

Originally Posted by $100T2

If anyone comes across something like this, preferably dirt cheap, let me know... I want to see if I can bolt it up to an FB chassis, so it's basically an experiment. I'm willing to risk a little bit of $$$ on trying this, but not too much.

It can be done but is not a bolt in swap. Alot of fab and welding. We looked into it but backed out when respeed offered the front cross member for the FB's to mount rack and pinion steering to. Cheaper in the long run and bolts in so I went that route.
Chad

04-13-2008, 09:05 PM	#1
$100T2 Big Daddy Join Date: Feb 2008 Location: Rhode Island Posts: 419 Rep Power: 18	WTB: FC subframe and front control arms for an experiment... If anyone comes across something like this, preferably dirt cheap, let me know... I want to see if I can bolt it up to an FB chassis, so it's basically an experiment. I'm willing to risk a little bit of $$$ on trying this, but not too much. __________________ Hell hath no fury like a rotor blown.

04-13-2008, 09:28 PM	#2
banzaitoyota Rotary Fanatic Join Date: Feb 2008 Posts: 201 Rep Power: 18	I have it, shipping will be a bitch thiugh, make me an offer __________________ My deuce

04-13-2008, 09:43 PM	#4
banzaitoyota Rotary Fanatic Join Date: Feb 2008 Posts: 201 Rep Power: 18	I need to measure a subframe in daylight to figure shipping out __________________ My deuce

04-13-2008, 09:45 PM	#6
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	Hey banzai, where are you located? It might be helpful to put it in your info (under your username). __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

04-13-2008, 09:49 PM	#7
-xlr8planet- RCC Contributor Join Date: Feb 2008 Location: Buenos Aires, Argentina Posts: 679 Rep Power: 18	Hi there man, Im on the same quest myself! Wheel base of both cars is 66 for the FB 66.5 for the FC I got a subframe from a theft recovery car a few days ago, I still have to pic it up. I will try to measure as much as possible. I also saved the pics from the Norwegian post on the other forum. A lot of welding is required... __________________ www.rx7club.com.ar RX-7 Forum in Spanish I make custom decals. Yes, you can ask me

04-13-2008, 09:57 PM	#10
$100T2 Big Daddy Join Date: Feb 2008 Location: Rhode Island Posts: 419 Rep Power: 18	Durrrrr, I meant the 1st gen tech section. __________________ Hell hath no fury like a rotor blown.

04-15-2008, 12:23 AM	#11
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	I have a front subframe cheap in NC about 2 hours above atlanta and 1 below asheville nc

04-15-2008, 02:25 PM	#12
$100T2 Big Daddy Join Date: Feb 2008 Location: Rhode Island Posts: 419 Rep Power: 18	How much shipped to 02814???? __________________ Hell hath no fury like a rotor blown.

05-06-2008, 03:09 PM	#13
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	i have the control arms and a rear fc sub frame...shoot me an offer on either. __________________ 87 T2 90 T2 'Vert

05-06-2008, 04:29 PM	#14
$100T2 Big Daddy Join Date: Feb 2008 Location: Rhode Island Posts: 419 Rep Power: 18	I need the front subframe. This is to convert my FB to an FC front suspension. __________________ Hell hath no fury like a rotor blown.