WTB fd rx7 roller/project

dazed&confused · 09-19-2012, 11:34 AM

I am looking for a RX7 FD roller. No accidents, and no body damage (faded paint ok). Interior doesn't have to be perfect, but no excessive damage to the internal plastics / hardware / seats / doors. Must also have engine harness still in car with nothing else missing except the engine and tranny (no cut wires please). Looking to spend no more than $5K. I will spend a little more if the car is immaculate inside and out. I will arrange / pay for shipping if the car is out of state. However, I will need to run a current car fax to see what it reports before committing to buying. Car must have a clear title. No salvage! Not in a hurry to buy, as I am looking for a nice roller for my project, but I do have the cash in hand and ready when I find the right roller. PM me or respond to this thread if you have no I should be looking at.

RX SE7EN · 09-19-2012, 12:10 PM

Good luck, but a roller like that most likely won't be available for $5k. You are looking at $6-6.5k, unless you get lucky and find a deal. Heck, a guy just got a fully running one for $4k. But you can't count on that happening.

dazed&confused · 09-19-2012, 12:12 PM

I've seen roller go for around 3-5k so I'm hoping to find something open to offers

1twistedrx7 · 09-21-2012, 09:28 PM

i have one and a 20b build!

dazed&confused · 10-12-2012, 12:45 AM

Ttt need one soon

aws140 · 10-12-2012, 12:39 PM

Exactly what you need:

http://atlanta.craigslist.org/nat/cto/3287642984.html

It's a friend's, and a well respected member's, car. His screen name is bwaits. I have seen the car in person and it's a great deal.

09-19-2012, 11:34 AM	#1
dazed&confused The Newbie Join Date: Sep 2012 Posts: 3 Rep Power: 0	WTB fd rx7 roller/project I am looking for a RX7 FD roller. No accidents, and no body damage (faded paint ok). Interior doesn't have to be perfect, but no excessive damage to the internal plastics / hardware / seats / doors. Must also have engine harness still in car with nothing else missing except the engine and tranny (no cut wires please). Looking to spend no more than $5K. I will spend a little more if the car is immaculate inside and out. I will arrange / pay for shipping if the car is out of state. However, I will need to run a current car fax to see what it reports before committing to buying. Car must have a clear title. No salvage! Not in a hurry to buy, as I am looking for a nice roller for my project, but I do have the cash in hand and ready when I find the right roller. PM me or respond to this thread if you have no I should be looking at.

09-21-2012, 09:28 PM	#4
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	i have one and a 20b build! __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com

09-19-2012, 12:10 PM	#2
RX SE7EN Rotary Fanatic Join Date: Feb 2010 Posts: 183 Rep Power: 16	Good luck, but a roller like that most likely won't be available for $5k. You are looking at $6-6.5k, unless you get lucky and find a deal. Heck, a guy just got a fully running one for $4k. But you can't count on that happening.

09-19-2012, 12:12 PM	#3
dazed&confused The Newbie Join Date: Sep 2012 Posts: 3 Rep Power: 0	I've seen roller go for around 3-5k so I'm hoping to find something open to offers

10-12-2012, 12:45 AM	#5
dazed&confused The Newbie Join Date: Sep 2012 Posts: 3 Rep Power: 0	Ttt need one soon

10-12-2012, 12:39 PM	#6
aws140 The Newbie Join Date: Mar 2008 Location: Marietta, GA Posts: 28 Rep Power: 0	Exactly what you need: http://atlanta.craigslist.org/nat/cto/3287642984.html It's a friend's, and a well respected member's, car. His screen name is bwaits. I have seen the car in person and it's a great deal.