Friendly advertisement

zonblitz · 04-06-2008, 05:45 PM

Hey Brian, my BNR's are a year old this month and still going strong! I love my BNR's!

***ZGN*** · 04-06-2008, 09:04 PM

1 year old here also! Shake and Bake!

zonblitz · 04-07-2008, 03:54 PM

That's right!

That just happened!

Bryan@BNR · 04-07-2008, 05:59 PM

Alright! good luck guys...

Pourman · 04-29-2008, 05:05 PM

Out of curiosity guys , with Street Port , what kind of HP numbers are you getting from the Stage 3's ??

GoodfellaFD3S · 05-09-2008, 11:14 PM

Quote:

Originally Posted by Pourman

Out of curiosity guys , with Street Port , what kind of HP numbers are you getting from the Stage 3's ??

Quite a few people have made 420ish rwhp at 17 psi non-seq with a ported motor

***ZGN*** · 04-29-2008, 06:35 PM

street port, 16lbs 363HP on a very hot day.

SPICcnmFD · 04-30-2008, 07:44 AM

I made 351 with a stock port at 16lbs, with a fairly rich tune. I gained 8hp by leaning it out from 10.5-10.8. It should be making 360+ since I leaned it out to 11.1-11.2. I just didn't feel like pulling it on the dyno any more that day. I need to mess around with the timing, I may do that this summer sometime.

I think max on the twins with a street port is is around 430hp+ non-seq, and 410-420 seq?? Bryan should know.

Bryan@BNR · 05-05-2008, 11:08 PM

ZGN. Get another intercooler and gain 40 RWHP! heheheh Thats all you gotta do.

Chris, looks good. Numbers are coming up... Bump the timing and you'll start seeing gains. Split timing will also help a bit with extracting some powah!

There have been many dyno in the mid 420's RWHP in non sequential form. Sequential record is 412. There has been a dyno sheet for 445 RWHP sequential, but there was speculation with that dyno sheet.

Bryan

SPICcnmFD · 05-06-2008, 08:02 AM

Thanks, I think I have a small boost leak somewhere around the LIM area. I did a test yesterday and all I heard was air coming out of something, not to mention their is nasty oilly mist looking crud all over the inj. area. That's probably why it's a little low on power.

Bryan@BNR · 05-06-2008, 12:48 PM

Quote:

Originally Posted by SPICcnmFD

Thanks, I think I have a small boost leak somewhere around the LIM area. I did a test yesterday and all I heard was air coming out of something, not to mention their is nasty oilly mist looking crud all over the inj. area. That's probably why it's a little low on power.

Hey Chris. You may need to replace those primary injector bushings. If you forget to put them in it will make a mess and be a big boost leak. Look at your oil metering lines to make sure they aren't broken in the loom.

SPICcnmFD · 05-06-2008, 12:56 PM

It does sound like the air is coming more from the primary inj. than from up toward the LIM. I'll probably look at it this weekend sometime. I remember something being iffy about those when I put the new injectors in.

Man it's a PIA to get those out though!!

Bryan@BNR · 05-06-2008, 01:52 PM

Quote:

Originally Posted by SPICcnmFD

It does sound like the air is coming more from the primary inj. than from up toward the LIM. I'll probably look at it this weekend sometime. I remember something being iffy about those when I put the new injectors in.

Man it's a PIA to get those out though!!

yup pita pita with all that sequential stuff. while you are under there check the oil metering lines. That is probaby where the oily mess is coming from. If those lines are fractured then the engine will not get any lubricants. If you move them and work around them they will easily break.

SPICcnmFD · 05-07-2008, 09:51 AM

Looks like its the grommets on the injectors, I remember one being kinda iffy, now that iffy one has turned into about half of one. Also if I plug the holes where the inj. go I don't hear or fell any air coming from anywhere else down around there.

The oil line have been replaced with some good braided rubber(something) lines.

And now that I think about it, I think the mess may be from where I had a coolant hose leak and the antifreeze is probably sicky so all the dust and crap is just probably sticking to the top of the engine. I'll try and clean it off a little if I can get to it. I'll probably just spray some brake cleaner if I can keep it off of all the other crap in the way.

Bryan@BNR · 05-07-2008, 11:52 PM

Now you may need to readjust the boost

.

04-06-2008, 05:45 PM	#1
zonblitz Rotary Fanatic Join Date: Feb 2008 Location: Pearl River, LA iTrader: (0) Posts: 166 Rep Power: 17	Friendly advertisement Hey Brian, my BNR's are a year old this month and still going strong! I love my BNR's!

04-30-2008, 07:44 AM	#8
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	I made 351 with a stock port at 16lbs, with a fairly rich tune. I gained 8hp by leaning it out from 10.5-10.8. It should be making 360+ since I leaned it out to 11.1-11.2. I just didn't feel like pulling it on the dyno any more that day. I need to mess around with the timing, I may do that this summer sometime. I think max on the twins with a street port is is around 430hp+ non-seq, and 410-420 seq?? Bryan should know. __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

05-06-2008, 08:02 AM	#10
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Thanks, I think I have a small boost leak somewhere around the LIM area. I did a test yesterday and all I heard was air coming out of something, not to mention their is nasty oilly mist looking crud all over the inj. area. That's probably why it's a little low on power. __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

05-06-2008, 12:56 PM	#12
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	It does sound like the air is coming more from the primary inj. than from up toward the LIM. I'll probably look at it this weekend sometime. I remember something being iffy about those when I put the new injectors in. Man it's a PIA to get those out though!! __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

05-07-2008, 09:51 AM	#14
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Looks like its the grommets on the injectors, I remember one being kinda iffy, now that iffy one has turned into about half of one. Also if I plug the holes where the inj. go I don't hear or fell any air coming from anywhere else down around there. The oil line have been replaced with some good braided rubber(something) lines. And now that I think about it, I think the mess may be from where I had a coolant hose leak and the antifreeze is probably sicky so all the dust and crap is just probably sticking to the top of the engine. I'll try and clean it off a little if I can get to it. I'll probably just spray some brake cleaner if I can keep it off of all the other crap in the way. __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

04-06-2008, 09:04 PM	#2
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	1 year old here also! Shake and Bake!

04-07-2008, 03:54 PM	#3
zonblitz Rotary Fanatic Join Date: Feb 2008 Location: Pearl River, LA iTrader: (0) Posts: 166 Rep Power: 17	That's right! That just happened!

04-07-2008, 05:59 PM	#4
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	Alright! good luck guys...

04-29-2008, 05:05 PM	#5
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida iTrader: (0) Posts: 320 Rep Power: 17	Out of curiosity guys , with Street Port , what kind of HP numbers are you getting from the Stage 3's ??

04-29-2008, 06:35 PM	#7
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	street port, 16lbs 363HP on a very hot day.

05-05-2008, 11:08 PM	#9
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	ZGN. Get another intercooler and gain 40 RWHP! heheheh Thats all you gotta do. Chris, looks good. Numbers are coming up... Bump the timing and you'll start seeing gains. Split timing will also help a bit with extracting some powah! There have been many dyno in the mid 420's RWHP in non sequential form. Sequential record is 412. There has been a dyno sheet for 445 RWHP sequential, but there was speculation with that dyno sheet. Bryan

05-07-2008, 11:52 PM	#15
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	Now you may need to readjust the boost .