goopy rotor housings compression test !!

rotorlips · 02-14-2012, 01:17 PM

hello !!! well, I have been meaning to post some results. here they are. stock 3rd gen motor,rebuilt with goopy rotor housings. both housings sent over came from motors with broken apex seals. not re useable. after the service, here you go. nice even numbers front and rear at low cranking speed.enjoy !!

note: this isn't my first set of housings from them either. used quite a few sets with similar results.

rotarycrazy · 02-14-2012, 01:21 PM

Nice

prrex4ever · 02-17-2012, 08:39 PM

I have hear great things about goopy's products.

em55ron · 02-17-2012, 11:17 PM

He built my 20b using all of his components and he reinforced and doweled the motor. I cant wait to have it up and running.

***TitaniumTT*** · 02-18-2012, 12:26 AM

Quote:

Originally Posted by rotorlips

hello !!! well, I have been meaning to post some results. here they are. stock 3rd gen motor,rebuilt with goopy rotor housings. both housings sent over came from motors with broken apex seals. not re useable. after the service, here you go. nice even numbers front and rear at low cranking speed.enjoy !!

note: this isn't my first set of housings from them either. used quite a few sets with similar results.

About 120psi, very nice. I would be interested to see what they do after 10k miles though. Is that a totally fresh engine not started or does it have some mileage on it?

rotorlips · 02-18-2012, 02:39 PM

Quote:

Originally Posted by TitaniumTT

About 120psi, very nice. I would be interested to see what they do after 10k miles though. Is that a totally fresh engine not started or does it have some mileage on it?

yes,I agree . however, I have used quite a few of these housings in motor builds in the last couple years.no issues. similar compression results.cant see anything that can really go wrong. just removing a little material. plenty of apex height .after all, whens the last time we saw an apex seal wear down as to not make contact with the housing ? they break before then (oem ones at least).in any event, I have been quite happy with the housing service. saved several of my core housings.

rotorlips · 02-18-2012, 02:57 PM

Quote:

Originally Posted by TitaniumTT

About 120psi, very nice. I would be interested to see what they do after 10k miles though. Is that a totally fresh engine not started or does it have some mileage on it?

fresh engine . basically it was a previous mazda reman with unknown mileage. had a blown apex seal. everything else was in nice shape.

em55ron · 02-18-2012, 10:30 AM

TitaniumTT.. I will be doing a mileage writeup on their seals once my build is up and running.

***TitaniumTT*** · 02-18-2012, 01:45 PM

Looking forward to seeing the results

Oyvindjs · 04-12-2012, 10:15 AM

cant wait to see if goopy houses are up there in the numbers after some K miles and a few years

Fendamonky · 04-13-2012, 09:12 AM

Quote:

Originally Posted by Oyvindjs

cant wait to see if goopy houses are up there in the numbers after some K miles and a few years

Rumor has it they are still holding solid compression after 5,000 miles

http://rotarycarclub.com/rotary_foru...ad.php?t=13408

RX-7FD3S · 04-12-2012, 08:45 PM

hmm, maybe i wont make a clock out of those old FD housings after all

general7 · 04-14-2012, 07:49 AM

Looks good, how's the pricing on these compared to new OEM housings?

Fendamonky · 04-15-2012, 06:39 PM

^ Hey, newblet... Did you bother reading that first post in the link I put up? Or did you just say "looks good" and move on? lol

(Hint: That very first post lists current price

)

yzf-r1 · 05-14-2012, 01:32 PM

Essentially they use a high speed buffer wheel to remove defects, seems like this could be done by other machine shops.

02-18-2012, 01:45 PM	#9
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Looking forward to seeing the results __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-12-2012, 08:45 PM	#12
RX-7FD3S Bartemann Join Date: Aug 2010 Location: Norway iTrader: (0) Posts: 22 Rep Power: 0	hmm, maybe i wont make a clock out of those old FD housings after all __________________ 1992 Rx-7 Type R1 1978 mazda RX-4 WAGON antrasite/black edition carbody+fiberglass=boat Driving a LHD RX7 is like jerking of with your left hand. It can be done, but it just doesnt feel right the RX7`s: FB:financial burden FC: financial Crisis FD: financial disaste my rides: http://www.mazda-ogn.org/phpBB3/view...p?f=17&t=20083 http://www.mazda-ogn.org/phpBB3/view...hp?f=17&t=5233

05-14-2012, 01:32 PM	#15
yzf-r1 Banned Join Date: Mar 2010 iTrader: (0) Posts: 67 Rep Power: 0	Essentially they use a high speed buffer wheel to remove defects, seems like this could be done by other machine shops. Last edited by yzf-r1; 05-14-2012 at 01:39 PM..

02-14-2012, 01:21 PM	#2
rotarycrazy Rotary Fan in Training Join Date: Mar 2008 Location: Spartanburg SC. iTrader: (0) Posts: 70 Rep Power: 17	Nice

02-17-2012, 08:39 PM	#3
prrex4ever Rotary Fanatic Join Date: Oct 2008 iTrader: (1) Posts: 274 Rep Power: 17	I have hear great things about goopy's products.

02-17-2012, 11:17 PM	#4
em55ron The Newbie Join Date: Aug 2011 iTrader: (0) Posts: 26 Rep Power: 0	He built my 20b using all of his components and he reinforced and doweled the motor. I cant wait to have it up and running.

02-18-2012, 10:30 AM	#8
em55ron The Newbie Join Date: Aug 2011 iTrader: (0) Posts: 26 Rep Power: 0	TitaniumTT.. I will be doing a mileage writeup on their seals once my build is up and running.

04-12-2012, 10:15 AM	#10
Oyvindjs Rotary Fan in Training Join Date: Apr 2012 iTrader: (0) Posts: 78 Rep Power: 13	cant wait to see if goopy houses are up there in the numbers after some K miles and a few years

04-14-2012, 07:49 AM	#13
general7 The Newbie Join Date: Apr 2012 iTrader: (0) Posts: 22 Rep Power: 0	Looks good, how's the pricing on these compared to new OEM housings?