13b series 6 and 5 speed help

dr50376272 · 11-05-2010, 06:31 AM

ok, i want to fit a series 6 13b turbo, 13b series 5 5 speed, in my rx4 coupe. right hand drive as i am in japan.

will the 12a turbo timing cover fit the series 6 13b? so i can make it front mount. will series 5 5 speed mate to series 6 motor with series 5 bellhousing? let me know people. also, does 12a turbo distributor fit 13b series 6 motor? allowing me to use a fuel only computer.

thanks guys !

rxspeed7 · 11-05-2010, 10:58 AM

Ok, let me get this straight.
13b rew with s5 tranny in a rx4?
If so the s5 tranny will bolt right up to the motor, and i'm not 100% sure but the front cover off the 12a should fit on the rew and then of cousre you will have to use a dizzy because the rew use crank pickup sensor rather than a cas like the rest of the 13b's.

Zack.

RETed · 11-05-2010, 02:15 PM

Quote:

Originally Posted by rxspeed7

and i'm not 100% sure but the front cover off the 12a should fit on the rew

No.

-Ted

***TitaniumTT*** · 11-05-2010, 03:31 PM

Quote:

Originally Posted by dr50376272

will series 5 5 speed mate to series 6 motor with series 5 bellhousing?

Yes, but you need to use the S5 clutch

Quote:

Originally Posted by RETed

No.

-Ted

RETed · 11-05-2010, 02:14 PM

Quote:

Originally Posted by dr50376272

will the 12a turbo timing cover fit the series 6 13b?

No.

-Ted

rxspeed7 · 11-05-2010, 03:38 PM

Like i said i was not sure if the 12a cover would fit. Thanks now i know.

RotorDad · 11-05-2010, 08:18 PM

Early (S3) 13b front cover will definitely work, but I'm pretty sure there is more than a few 13b REW's using 12a covers.

NoDOHC · 11-05-2010, 10:22 PM

I think if I recall correctly, the cover will bolt on, but the water pump will not bolt on after the cover is installed (they interfere). I know this is an issue between s4 and s5 and I am pretty sure that a 12a front cover will bolt on an s4.

11-05-2010, 06:31 AM	#1
dr50376272 Rotary Fan in Training Join Date: Oct 2010 iTrader: (0) Posts: 80 Rep Power: 15	13b series 6 and 5 speed help ok, i want to fit a series 6 13b turbo, 13b series 5 5 speed, in my rx4 coupe. right hand drive as i am in japan. will the 12a turbo timing cover fit the series 6 13b? so i can make it front mount. will series 5 5 speed mate to series 6 motor with series 5 bellhousing? let me know people. also, does 12a turbo distributor fit 13b series 6 motor? allowing me to use a fuel only computer. thanks guys !

11-05-2010, 08:18 PM	#7
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Early (S3) 13b front cover will definitely work, but I'm pretty sure there is more than a few 13b REW's using 12a covers. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect. Last edited by RotorDad; 11-05-2010 at 08:26 PM..

11-05-2010, 10:22 PM	#8
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	I think if I recall correctly, the cover will bolt on, but the water pump will not bolt on after the cover is installed (they interfere). I know this is an issue between s4 and s5 and I am pretty sure that a 12a front cover will bolt on an s4. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)