Rear sub-frame nuts.

sen2two · 10-15-2010, 10:09 AM

I started on a rear sub-frame swap about a month ago, got it about 90% done then life got in the way, and havnt touched it since. I finally have time to finish the install, and I cant find the big nuts that goes to the front of the sub frame.

Anyone now what size they are so I can go buy some at a local auto/hardware store. sub

sen2two · 10-15-2010, 05:02 PM

I don't know the thread and pitch still, but i did go down to the junk yard to pull one off another FC. Luck would have it, they didn't have any there...

So I started checking random Mazdas figuring that there would be the same bolt somewhere. Yupp, found them on a Miata for the front suspension and the 929 rear subframe mounts front and rear. Probley a few other cars too...

JustJeff · 10-16-2010, 12:33 AM

Machine shop can tell you what thread and pitch they are

N.RotaryTech · 10-16-2010, 05:45 AM

I was just dismantling the sub frame on my parts rx7 a few days ago.
All I can tell you is, I remember the size being 21mm. Among other sizes, 17 and 14.

Cool that you found them off other mazdas.

NoDOHC · 10-17-2010, 03:03 PM

Quote:

Originally Posted by JustJeff

Machine shop can tell you what thread and pitch they are

You can measure them yourself, M12X1.25X25 = a bolt that is 12mm in diameter, has 1.25 mm per thread and is 25 mm long from the tip to the base of the head. Nuts only have the first two numbers (M12X1.25).

YaNi · 10-31-2010, 03:54 PM

The nuts are M14x1.5

10-15-2010, 10:09 AM	#1
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	Rear sub-frame nuts. I started on a rear sub-frame swap about a month ago, got it about 90% done then life got in the way, and havnt touched it since. I finally have time to finish the install, and I cant find the big nuts that goes to the front of the sub frame. Anyone now what size they are so I can go buy some at a local auto/hardware store. sub __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

10-15-2010, 05:02 PM	#2
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	I don't know the thread and pitch still, but i did go down to the junk yard to pull one off another FC. Luck would have it, they didn't have any there... So I started checking random Mazdas figuring that there would be the same bolt somewhere. Yupp, found them on a Miata for the front suspension and the 929 rear subframe mounts front and rear. Probley a few other cars too... __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

10-16-2010, 05:45 AM	#4
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC iTrader: (0) Posts: 552 Rep Power: 17	I was just dismantling the sub frame on my parts rx7 a few days ago. All I can tell you is, I remember the size being 21mm. Among other sizes, 17 and 14. Cool that you found them off other mazdas. __________________ '89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily.

10-16-2010, 12:33 AM	#3
JustJeff RCC Contributor Join Date: Mar 2008 iTrader: (1) Posts: 505 Rep Power: 17	Machine shop can tell you what thread and pitch they are

10-31-2010, 03:54 PM	#6
YaNi The Newbie Join Date: Sep 2008 Location: Avon, OH iTrader: (0) Posts: 1 Rep Power: 0	The nuts are M14x1.5