Wiper Switch Repair

RotaryDiagnostics · 10-06-2010, 11:26 AM

As many of you are aware, the relays in the 2nd gen wiper switch are subject to failure over time. I have posted repair instructions on our web site as a service to fellow RX-7 enthusiasts. These instructions were derived from information originally posted on Icemark's web site. That web site is no longer available, so you may want to save a copy of these instructions on your computer for future reference. I will leave them up for at least a few weeks.

http://rotarydiagnostics.com/WiperRepair.htm

mazdadude7 · 10-06-2010, 01:06 PM

Thanks I really needed this!!! and couldnt find it.

mazdadude7 · 10-06-2010, 01:18 PM

http://search.digikey.com/scripts/Dk...l&name=Z950-ND

thats the relay that you need to buy...

Rotary Related · 10-21-2010, 05:18 PM

Very good info. Everyone with a FC should do this to eliminate problems with the wiper switch. And keep from ruining the factory wiring harness.

Good post mazdadude7 I saved that page for later.

I should offer that as a service for people that can't solder. Hmmmm. we'll see.

10-06-2010, 11:26 AM	#1
RotaryDiagnostics Compression Tester Man Join Date: Feb 2009 Location: Mont Alto, PA Posts: 137 Rep Power: 17	Wiper Switch Repair As many of you are aware, the relays in the 2nd gen wiper switch are subject to failure over time. I have posted repair instructions on our web site as a service to fellow RX-7 enthusiasts. These instructions were derived from information originally posted on Icemark's web site. That web site is no longer available, so you may want to save a copy of these instructions on your computer for future reference. I will leave them up for at least a few weeks. http://rotarydiagnostics.com/WiperRepair.htm

10-21-2010, 05:18 PM	#4
Rotary Related Good stuff at low prices Join Date: Oct 2010 Location: TX Posts: 52 Rep Power: 16	Very good info. Everyone with a FC should do this to eliminate problems with the wiper switch. And keep from ruining the factory wiring harness. Good post mazdadude7 I saved that page for later. I should offer that as a service for people that can't solder. Hmmmm. we'll see. __________________ Visit us at: www.rotaryrelated.com or find us on facebook

10-06-2010, 01:06 PM	#2
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Thanks I really needed this!!! and couldnt find it.

10-06-2010, 01:18 PM	#3
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	http://search.digikey.com/scripts/Dk...l&name=Z950-ND thats the relay that you need to buy...