FS: 83 gsl parts car anything you want! In NC

mazdadude7 · 02-24-2008, 01:24 PM

What i have is a red 83 gsl rx7. It is already missing the interior. Has the x wheels, the rear glas has the wiper, it still has all the switches for the interior. It is a power window model. I can remove any part left on it such as the engine harness or whatever else you desire. I can also sell it as an entire car for use as a track car. I have the ability to transport this if needed.

Pm me or call me @ (828) 342-7590

spankle my wankle · 02-26-2008, 04:12 PM

pictures??

mazdadude7 · 02-26-2008, 10:59 PM

http://s126.photobucket.com/albums/p111/mazdadude7/ Thats just a few but let me know what you want and I will take a picture of it for you.

spankle my wankle · 02-27-2008, 01:25 AM

wow that thing is bare

P71 · 02-27-2008, 11:03 AM

I could use some of the trim and interior parts, I'll PM you a list in a few days, I need to dig through the 83 GSL I just bought to see what all it needs.

WE3RX7 · 02-27-2008, 04:59 PM

No chance on parting out the body?

mazdadude7 · 02-27-2008, 10:59 PM

sure whatever you guys want I will take off... we3rx7 you might be close enough that I could delvier it to you or meet half way...

impulsive-RX7 · 02-29-2008, 09:11 AM

Do you still have the tail lights and front turn signals?

mazdadude7 · 02-29-2008, 02:23 PM

I have the tail lights but not sure on the condition of the front turn signals i will check into it

WE3RX7 · 02-29-2008, 04:34 PM

Possibly - I have a local guy that is literally 20 minutes from me with parts all over, but is a little pricey honestly. I'm trying to work a deal w/ him for the header panel and passenger fender but haven't called him back since I've been slammed at work and dont want to call too late in the day...

What would you be looking for for the passenger fender and header panel? Arent you in TN?

$100T2 · 02-29-2008, 05:52 PM

Front crossmember?

mazdadude7 · 03-01-2008, 11:09 PM

I would rather everyone tell me what they would pay for the part and that way I dont have to figure out the value of the parts. I can pull the front crossmember if you would like as well as the fender and whatever else you guys want. I am near franklin nc which is an hour below ashville nc. I will meet to deliver parts if I dont have to drive more than 2 hours.

$100T2 · 03-11-2008, 06:22 PM

Quote:

Originally Posted by mazdadude7

I would rather everyone tell me what they would pay for the part and that way I dont have to figure out the value of the parts. I can pull the front crossmember if you would like as well as the fender and whatever else you guys want. I am near franklin nc which is an hour below ashville nc. I will meet to deliver parts if I dont have to drive more than 2 hours.

$40 + shipping for the front crossmember???

P71 · 03-02-2008, 04:04 AM

I need the driver's side rear marker light lense. Say $10 shipped?

psycom · 03-11-2008, 12:52 PM

I need an oil cooler for my 85 GSL-SE! Anyone?? I'm in Knoxville TN. PM me if you got one. Thanks

02-24-2008, 01:24 PM	#1
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	FS: 83 gsl parts car anything you want! In NC What i have is a red 83 gsl rx7. It is already missing the interior. Has the x wheels, the rear glas has the wiper, it still has all the switches for the interior. It is a power window model. I can remove any part left on it such as the engine harness or whatever else you desire. I can also sell it as an entire car for use as a track car. I have the ability to transport this if needed. Pm me or call me @ (828) 342-7590

02-27-2008, 11:03 AM	#5
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	I could use some of the trim and interior parts, I'll PM you a list in a few days, I need to dig through the 83 GSL I just bought to see what all it needs. __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

03-02-2008, 04:04 AM	#14
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	I need the driver's side rear marker light lense. Say $10 shipped? __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

02-26-2008, 04:12 PM	#2
spankle my wankle Rotary Fanatic Join Date: Feb 2008 iTrader: (0) Posts: 185 Rep Power: 17	pictures??

02-26-2008, 10:59 PM	#3
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	http://s126.photobucket.com/albums/p111/mazdadude7/ Thats just a few but let me know what you want and I will take a picture of it for you.

02-27-2008, 01:25 AM	#4
spankle my wankle Rotary Fanatic Join Date: Feb 2008 iTrader: (0) Posts: 185 Rep Power: 17	wow that thing is bare

02-27-2008, 04:59 PM	#6
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	No chance on parting out the body?

02-27-2008, 10:59 PM	#7
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	sure whatever you guys want I will take off... we3rx7 you might be close enough that I could delvier it to you or meet half way...

02-29-2008, 09:11 AM	#8
impulsive-RX7 Rotary Fanatic Join Date: Feb 2008 Location: Jacksonville, NC iTrader: (0) Posts: 105 Rep Power: 17	Do you still have the tail lights and front turn signals?

02-29-2008, 02:23 PM	#9
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	I have the tail lights but not sure on the condition of the front turn signals i will check into it

02-29-2008, 04:34 PM	#10
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Possibly - I have a local guy that is literally 20 minutes from me with parts all over, but is a little pricey honestly. I'm trying to work a deal w/ him for the header panel and passenger fender but haven't called him back since I've been slammed at work and dont want to call too late in the day... What would you be looking for for the passenger fender and header panel? Arent you in TN?

02-29-2008, 05:52 PM	#11
$100T2 Big Daddy Join Date: Feb 2008 Location: Rhode Island iTrader: (2) Posts: 419 Rep Power: 17	Front crossmember?

03-01-2008, 11:09 PM	#12
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	I would rather everyone tell me what they would pay for the part and that way I dont have to figure out the value of the parts. I can pull the front crossmember if you would like as well as the fender and whatever else you guys want. I am near franklin nc which is an hour below ashville nc. I will meet to deliver parts if I dont have to drive more than 2 hours.

03-11-2008, 12:52 PM	#15
psycom The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 2 Rep Power: 0	I need an oil cooler for my 85 GSL-SE! Anyone?? I'm in Knoxville TN. PM me if you got one. Thanks