GI: Sparco Torino II Seats and Sliders (2)

infernosg · 07-29-2010, 08:41 AM

Just checking if anyone would be interested in my two Sparco Torino II seats and sliders (not pictured). I am the second owner of these and there is little to no wear. Ignore the cat hair on the first couple pictures - it's easily removed. The seats retail at $600 new and the sliders are $60 new. Obviously I'm not expecting to get that but I am open to reasonable offers. I suppose I could ship these but expect shipping to be costly. I will also consider trades plus cash, if necessary (on my end or yours), for fixed back seats such as the Sparco EVO, Sparco Rev Plus, Recaro Pole Position, etc.

I also have a custom bracket/stock slider setup built for the driver's side for the FC RX-7 that I could throw in for free if wanted.

FerociousP · 07-29-2010, 10:34 AM

so I guess these won't bolt directly (don't have both brackets for an FC)?

infernosg · 07-29-2010, 01:50 PM

Quote:

Originally Posted by FerociousP

so I guess these won't bolt directly (don't have both brackets for an FC)?

Nope, the seats will not bolt directly in (what seats do?). Now if you're asking if brackets are available, then yes there are some out there like Wedge Engineering ($110), Bride ($200+), etc. I however, do not have these, due to poor experience with the Wedge brackets in the past, and made my own bracket out of the stock sliders for the driver's seat. I attempted to do the same on the passenger side, but failed due to the assinine stock setup. So in order to bolt these into any RX-7 you would need to only supply the mounting brackets.

wanganwarrior · 07-30-2010, 11:26 PM

How much for both of them plus sliders?

infernosg · 07-31-2010, 10:29 AM

Quote:

Originally Posted by wanganwarrior

How much for both of them plus sliders?

PM sent.

infernosg · 08-24-2010, 04:36 PM

Still for sale. I'd like to get rid of these. Throw out an offer.

Ptotherice · 08-25-2010, 03:31 PM

If only they bolted in with what they have I might grab them. Free bump, GLWS.

infernosg · 08-25-2010, 06:31 PM

Quote:

Originally Posted by Ptotherice

If only they bolted in with what they have I might grab them. Free bump, GLWS.

I made a bracket for the driver's side that works just fine - about the same height as the stock setup, maybe a little taller, just too tall for me and a helmet. The passenger side is beyond my current fabrication skill and resources. If you want these to bolt right in you'll need to pay $110 for some brackets from Wedge Engineering.

Ptotherice · 08-26-2010, 02:21 PM

That's the problem, not enough money haha.

infernosg · 10-09-2010, 02:41 PM

Still trying to get rid of these. I'd like to get $850+shipping for both seats and the sliders. I'd really prefer not to ship these though...

infernosg · 01-29-2011, 08:41 PM

Still trying to get rid of these. $700 takes both seats and sliders (shipping would be extra due to size)!

bmwjoe · 09-02-2011, 04:59 AM

I'm interested, hope I'm not too late. I send you PM with my email. Look forward to hearing from you.

Joe

infernosg · 09-02-2011, 07:41 AM

Quote:

Originally Posted by bmwjoe

I'm interested, hope I'm not too late. I send you PM with my email. Look forward to hearing from you.

Joe

These actually sold back in February/March. I apologize because it looks like I failed to update this thread.

07-29-2010, 08:41 AM	#1
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	GI: Sparco Torino II Seats and Sliders (2) Just checking if anyone would be interested in my two Sparco Torino II seats and sliders (not pictured). I am the second owner of these and there is little to no wear. Ignore the cat hair on the first couple pictures - it's easily removed. The seats retail at $600 new and the sliders are $60 new. Obviously I'm not expecting to get that but I am open to reasonable offers. I suppose I could ship these but expect shipping to be costly. I will also consider trades plus cash, if necessary (on my end or yours), for fixed back seats such as the Sparco EVO, Sparco Rev Plus, Recaro Pole Position, etc. I also have a custom bracket/stock slider setup built for the driver's side for the FC RX-7 that I could throw in for free if wanted. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

07-29-2010, 10:34 AM	#2
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	so I guess these won't bolt directly (don't have both brackets for an FC)? __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

08-24-2010, 04:36 PM	#6
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Still for sale. I'd like to get rid of these. Throw out an offer. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

10-09-2010, 02:41 PM	#10
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Still trying to get rid of these. I'd like to get $850+shipping for both seats and the sliders. I'd really prefer not to ship these though... __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

01-29-2011, 08:41 PM	#11
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Still trying to get rid of these. $700 takes both seats and sliders (shipping would be extra due to size)! __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

07-30-2010, 11:26 PM	#4
wanganwarrior Rotary Fanatic Join Date: Jul 2009 Posts: 108 Rep Power: 17	How much for both of them plus sliders?

08-25-2010, 03:31 PM	#7
Ptotherice Rotary Fan in Training Join Date: Aug 2010 Posts: 39 Rep Power: 0	If only they bolted in with what they have I might grab them. Free bump, GLWS.

08-26-2010, 02:21 PM	#9
Ptotherice Rotary Fan in Training Join Date: Aug 2010 Posts: 39 Rep Power: 0	That's the problem, not enough money haha.

09-02-2011, 04:59 AM	#12
bmwjoe The Newbie Join Date: Sep 2011 Posts: 1 Rep Power: 0	email me I'm interested, hope I'm not too late. I send you PM with my email. Look forward to hearing from you. Joe